SPECIAL REPAIR TO OR MD ACCN BLDG NO 1063 08X QTRS AT AJMER LINE AND PROVN OF OFFRS TOILET IN THE OFFICE OF SPECIAL TASK CELL STC 879 INT AND FS UNDER THE AREA OF AGE BR I OF GE ARMY CENTRAL JODHPUR(9077/E8)

Amount

Note:- All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ Bidders are required to quote their rates accordingly

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level), complete all as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in flooring,path , sub base, foundation etc., complete all as specified and as directed.

M&L 50mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement complete all as specified and directed.

S&F machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of anti abrassive rubberifed material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand. The compressive strength of layer shall not be less than 350 Kg/Cm2, complete all as specified and as directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed.

M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

All as per item No 9 above but except stone, complete all as specified and as directed.

M&L PCC solid building blocks 10 cm thick type C-1 1:2:4 set in cement mortar (1:6), complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate), complete all as specified and as directed.

M&L for non-skid coloured ceremic tiles joint less (premium quality) 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make Kajaria/ Somany/ Johnson

All as per item No. 15 above but skarting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L non skid ceramic colour joint free tiles (premium quality) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson

M&L for glazed colour ceramic tiles (premium quality) of size 350x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as directed.

Dismantling of stone set of any description laid in dry removing rubbish to outside MD Land, complete all as directed.

M&L 18 to 20 mm thick machine cut Kota stone slab flooring ,cooking plate from etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick rendering in cement mortor 1:6, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut Kota stone in shelf and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.

M&L 18 to 20 mm thick machine cut one side polished black granite in kitchen plate form, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.

Taking down existing cement or cement lime plaster, any discription on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc., complete all as specified and as directed.

M&L Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth, complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:6 on stone Masonary surface finished even and smooth without extra cement on stone wall surface, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces on wall and applying over one coat of primers on walls one coat (3mm thick in two layers) Birla/JK of wall putty with fair finished and even surface and applying two coat of oil bound distemper, complete all as specified and as directed.

M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putty on plastered surface, complete all as specified and as directed.

M&L three coats of white wash on newly plastered surface of wall including preparation of surfaces, complete all as specified and as directed.

M&L three coats of white wash on newly plastered surface of ceiling including preparation of surfaces, complete all as specified and as directed.

M&L one coats of white wash on old surface of wall, complete all as specified and as directed.

M&L one coats of white wash on old surface of ceiling, complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.

Taking down chowkhats or frames (without taking of shutters from frames) area not exc 1.5 sqm each without taking off shutter from the frame, complete all as directed.

Taking down chowkhats or frame (without taking of shutters from frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n.exc 2 Sqm each after easing and adjusting, complete all as directed.

Taking down shutter of any description, exc. 1 Sqm but n.exc 2 Sqm re-fixing in the same opening after necessary repair like easing etc., complete all as specified and as directed.

M&L for Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed.

S&F mild steel frame work as in stairs ,hand rails half round or other steel section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc wind ties for roof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified and as directed.

M&L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces along with locking arrangement mortice lock handle etc., complete all as specified and as directed.

S&F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a), complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F of 35mm thick factory made partly glazed and partly skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube, complete all as specified and as directed.

Taking down steel window/ventilator (glazed/ fly proof) of any description, complete all as specified and as directed.

S&F for box type steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete with or without cooler opening all as specified incl repair to jams etc., complete all as specified and as directed by the Engineer-in-Charge

S&F for box type steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete with or without cooler opening all as specified and as directed incl to jams etc., complete all as specified and as directed by the Engineer-in-Charge

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded, complete all as specified and as directed.

S&F of steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded, complete all as specified and as directed.

S&F of aluminium anodised,tower bolts of extruded section of 200 mm long, complete all as specified and as directed.

S&F aluminum anodised handles extruded section of size 150mm long, complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt with hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.

S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.

S&F of mild steel butt hinges 100mm size medium weight, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring, fixed in floors,140mm long, complete all as specified and as directed.

S&F of 4mm thick figured glass pinheaded sheet glass panes and glazing with putty in squace of size not. exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S&F for 3 mm thick plain glass ordinary quality & glazing with oil putty in squace not exceeding 0.50sqm in each pane, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to A1 door/ window, complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 Mix (using 20mm graded stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.

S&F MS harrison rails, decorative 25mm curtain rod with fixing brackets, knob etc as in repairs, complete all as specified and as directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified and as directed.

S&F in repair soap dish of PTMT fixed with screws, complete all as specified and as directed.

S&F in repair PTMT towel rail 450mm long fiexd to wall with chromium plated brass screws and wooden cleats Min weight 170gms approved make, complete all as specified and as directed. Make : Prayag/ Polytuff

S&F in repair MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F in repair Stainless steel 1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm, complete all as specified and as directed.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

S&F as in repairs vitreous china wash down water closet Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc., complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

S&F in repair Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as directed.

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as directed.

S&F 100mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F 75mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified and as directed.

S&F 100 mm CI branch pieces single socketed "Y" equal or unequal, complete all as specified and as directed.

S&F 75 mm CI branch pieces single socketed "Y" equal or unequal, complete all as specified and as directed.

S&F100mm CI bends any radius, complete all as specified and as directed.

S&F 75 mm dia CI bend with oval acess door fixed to pipe, complete all as specified and as directed.

S&F 100mm dia CI vent cowl fixed to pipe, complete all as specified and as directed.

S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.

S&F in repair of chromium plated shower rose 50mm dia round shape, complete all as specified and as directed.

S&F in repair chromium plated 15mm dia pillar cock long neck with aerator, complete all as specified and as directed.

S&F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, complete all as specified and as directed.

S&F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar/ Cera/ Kohler as approved by GE

S&F as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange, complete all as specified and as directed. Make : Jaquar/ Cera/ Kohler as approved by GE

S&F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type), complete all as specified and as directed. Make : Jaquar/ Cera/ Kohler as approved by GE

S&F as in repairs of 15 mm dia bib tap long body with flange with chromium plated fixed with iron pipe, complete all as specified and as directed. Make : Jaquar/ Cera/ Kohler as approved by GE

S&F low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection, complete all as specified and as directed. Make : Parryware/ Hindware/ Cera

Dismantling water tanks of capacity exc 250 ltrs but n.exc 500 ltrs and removing to store, complete all as directed.

S&F rotational moulded polythene 500 Ltrs water storage tanks triple layer white colour (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank including tank led cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex/ Polytuff

Disconnecting of old serviceable PVC tank setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank, complete all as specified and as directed.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repair 1200 X 900 X 200 mm size Stainless steel Plate Racks, complete all as specified and as directed.

S&F second class hard wood (sal) plain, fillets, square, rectangular or triangular in section clean sawn, secured with nails of sectional area exc. 13 Sqcm but n.exc. 25 Sqcm, complete all as specified and as directed.

S&F in repair 18/19mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice of lamination and other side balancing white lamination as in cup board shutter fixed with screw teak wood beading all round / exposed faces, complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, with width of flaps 40 mm when open, complete all as specified and as directed.

S&F of 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

S&F PVC cupboard knob fixed with nut, screw and washer of mild steel bright finished size exc. 25 mm dia but n.exc. 50 mm dia (as per sample), complete all as specified and as directed.

M&L 50 thick PCC (1:2:4)Type B-1 (using 20 mm graded crushed stone aggregate) for water tank plinth, complete all as specified and as directed.

Demolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as specified and as directed.

Providing precast RCC Type C1 (1:3:6) (using 20mm crushed graded aggregate) as in cover slab for man hloes set in CM 1:6, complete all as specified and as directed.

M&L 5 mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.

Supply only Integral water proofing compund, complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

S&F of water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Demolition of reinforced cement concrete of any description for roof, colums, beam of any type etc., complete all as specified and as directed.

Use and waste of formwork to sides and soffits of suspended slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete, complete all as specified and as directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide with fair finished surfaces, complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces, complete all as specified and as directed.

M&L RCC design mix M-25 (using 20mm graded crushed stone aggregate) as in slab supported on wall, roof slab, chijja and in shelve etc., complete all as specified and as directed.

M&L RCC nominal Mix-20 (using 20mm graded crushed stone aggregate) as in beam, roof beam, cantilevers, lintel beam, etc., complete all as specified and as directed.

S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified and as directed.

S&F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups, complete all as specified and as directed.

M&L for roof treatment in the following stages, complete all as specified and as directed :- (a) First Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm.

Surface excavation n.exc 30 cm deep & averaging 15 cm deep getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil, complete all as specified and as directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed.

M&L hardcore of broken stone or boulders of guage n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for Jodhpur type stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted cement mortar 1:3, complete all as specified and as directed.

M&L for fabrication of louvered aluminum ventilators fabricated with anodized aluminum rectangular section weighing 0.55 Kg/m in frame & other section with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing half portion & half bottom portion should be fixed with glass panes etc all as per sample kept in GE office & fixed in position, complete all as specified and as directed. (Note : Glass pane & stainless steel wire cloth shall be measured & paid separately)

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of appertuer 1.40 mm fixed fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed.

S&F Bib tap,15mm bore, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F Angle valve,15mm bore, fancy type, brass chromium plated, concealed type, with long shank and cup, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F for cast copper alloy chromium plated 2 in 1 Angle Cock (all as per sample), complete all as specified and as directed.

S&F Pillar tap, brass, 15mm dia, with capston heads, chromium plated, screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin, complete all as specified and as directed.

S&F PVC connection, 15mm size, with PTMT nuts, of length 450mm long including taking down of existing old pipe, complete all as specified and as directed.

S&F for Vitreous china wash down water closet, pedestal pattern (EWC), white, with 'P' or 'S' trap, including PVC water closet seat, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed.

Supply only PVC flushing cistern, low level,10 litres capacity , valveless, syphonic action type, white, with inlet, ball valve, float, handle, flush pipe of polythlene of low or high density or PVC, 32mm dia, complete all as specified and as directed.

S&F Vitreous china urinal, bowl urinal flat back, size of 465 x 355 x 265mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections and fixed, complete all as specified and as directed.

S&F Vitreous china wash hand basin, white, flat back, size 550 x 400mm, with and including painted new brackets, waste coupling, waste pipe of 32mm dia low density polythelene (LDPE) pipes of pressure rating 4 Kgf/sqcm, complete all as specified and as directed.

S&F Towel Rail, brass chromium plated. D type, 600 mm long between flanges fixed, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms), complete all as specified and as directed.

S&F for PVC (SWR) pipes, 75mm bore, single socketed, in any length, with rubber ring joints, laid in trenhes or in floor, complete all as specified and as directed.

S&F for PVC (SWR) pipes, 75mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and as directed.

S&F for PVC (SWR) pipes, 110mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and as directed.

S&F for PVC (SWR) bends, 75mm bore, complete all as specified and as directed.

S&F for PVC (SWR) bends, 110mm bore, complete all as specified and as directed.

S&F for PVC (SWR) vent cowl of 110mm bore, complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

M&L for bedding to drain pipes 150mm dia including packing under, and haunching in PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) against the side of SWG after they are laid and tested, complete all as specified and as directed.

M&L for 150 mm bore SWG drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1, including testing etc., complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surfaces channel and drain of man holes finishing surfaces even and smooth complete all as specified and as directed.

E/M ITEM Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc., complete all as specified and as directed.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, (ISI Marked) (class V conductor), in and including PVC concealed conduit (MMS), (ISI Marked) not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover ((ISI Marked) hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch through regulator, complete all as specified and as directed.

(c) One socket outlet 5 pin 6 Amps on same board, complete all as specified and as directed.

(d) One socket outlet 5 pin 6 Amp on independent board, complete all as specified and as directed.

(e) One bell point controlled by one bell push, complete all as specified and as directed.

(f) One light point controlled by two , two way switches, complete all as specified and as directed.

All as per item No 154 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch flush type single pole one way 6 Amp (ISI Marked), complete all as specified and as directed.

S&F switch flush type single pole one way 16 Amp (ISI Marked), complete all as specified and as directed.

S&F socket out let , 5 pin , 6 Amp FT, complete all as specified and as directed.

S&F socket out let , 5/6 pin ,16 Amp FT. (ISI Marked), complete all as specified and as directed.

S&F Bell push, flush type, 5 amp (ISI Marked), complete all as specified and as directed.

S&F Buzzer, Ding Dong AC. 230 volts, single pole (ISI Marked), complete all as specified and as directed.

S&F 5 amp two way switch (ISI Marked), complete all as specified and as directed.

S&F socketed stepped type electonic fan regulator flush type, (ISI Marked), complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps (ISI Marked), complete all as specified and as directed.

S&F connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable, complete all as specified and as directed MAKE : Havells/ Philips/ CG.

Taking down and Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as directed.

Taking down and refixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan, complete all as directed.

M&L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length.

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, complete all as specified and as directed. Make : Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, complete all as specified and as directed. Make : Legrand/ ABB/ Havells Note :-Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 5 To 32 AMP, complete all as specified and as directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (iii) SPN 40 to 63 AMP, complete all as specified and as directed.

S&F 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. (iii) TPN 40 To 100 AMP, complete all as specified and as directed.

Taking down existing electric meter of any size any capacity and deposited to E/M Store yard and Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH, complete all as directed.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion, complete all as specified and as directed. Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit, RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 16 sq 4 core in service connection. Make : Polycab/ Havells/ Finolex

S&F LED tube light fitting Box type 20watt complete with all accessories such as bipin holders connector block, etc internally pre-wired, including LED lamp-1 No. connection up with, multistranded copper conductor of size 1.00 sq mm flexible cable Make : Crompton/ Havells/ Bajaj

S&F Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS SPN 4 way, Make : Legrand/ ABB/ Havells Note:- Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make : Legrand/ ABB/ Havells

S&F MCB SPN 40 Amp, 10 KA, (ISI Marked), complete all as specified and as directed. Make : Legrand/ ABB/ Havells

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 10 sq 2 core in service connection, complete all as specified and as directed. Make polycab/Havells/Finolex

Note:- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

JB INFRA

Siddhi Vinayak and Co