Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹42.4 L+₹16.5 L (63.4%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹45.6 L+₹19.6 L (75.6%)Rejected-Finance 64 SHAHEED UDHAM SINGH MARKET NEAR OLD BUS STAND BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance L3 | |
| 4 | L4₹46.2 L+₹20.2 L (77.8%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance L4 | |
| 5 | L5₹46.5 L+₹20.5 L (79.1%)Rejected-Finance 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S) Bathin
GE (SOUTH) BATHINDA
GE(S) BTD TOKEN NO 68 OF 2023-24 CERTAIN BR REPAIRS TO BUILDINGS IN BANA SINGH ENCLAVE AND ALBERT EKKA ENCLAVE UNDER AOR OF AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_615523_1
GE(S)/BTD/TOKEN NO 68 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BATHINDA
Class D
Category a(i)
10 documents required · 10 mandatory
₹500
GE (SOUTH) BATHINDA
₹90,000
Yes
14 Nov 2023
24 Aug 2023
18 Sept 2023
24 Aug 2023
15 Sept 2023
8 Sept 2023
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) door,ventilator,cupboard not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.
Supply and fixing Solid PVC Door Frame as in cupboard,door,ventilator of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .
Supply and fixing Factory Made Solid PVC Moulded Door Shutter as in cupboard,door,ventilator (with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.
Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .
S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .
S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.
S & F 30 mm thick 2nd class hard wood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flaps 30mm when open) complete all as specified.
S & F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws(150 mm )complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.
Supply and fixing 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as sppecified
Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
S & F Fe 410(Gde_x005f?E- 250)quality Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; including welding and fixing hinges to chowkhats.
S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.
M & L preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint and complete all as specified and directed.
S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified
Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple, length bolt 300mm, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified
Supply and fixing mild steel barrel tower bolts, 150 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and directed
Figured glass, pin head type(4 mm thick) and glazing with oil putty in squares n exc 0.5 sq. m in each pane
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and directed.
Supply for Neoprene/ EPDM rubber gasket
Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs.
S&F Rotational moulded polyethylene 500 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1complete all as specified and directed.
supply and fix pvc tank covers for 500 ltr capacity suitable for existing tanks.
Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.
Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old glazed tiles complete
Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat(1:4 cement plaster ) on vertical surface
Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster (1:4) on floor surface
Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
M&L for 100 mm thick cement concrete 1:4:8, type D2 (using 40mm graded agg) as in subbase etc finished even and smooth w/o using extra cement.
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment.
M & L Sand filling under floors or in foundations including watering and consolidation
Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.
M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.
Supply and fixing in repair bib taps, chromium plated brass with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .
S&F 15mm bore cp sink mixture with swinging screwed down for iron pipe and fixed coated spout complete all as specified and directed.
S&F in repair angle stop valve for 15 mm bore dia of pipe, brass chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .
Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.
S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .
S&F in repais stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified & directed.
M&L for 25 mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified.Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .
Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engineer-in-Charge.
S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with CI 'P' or 'S' trap ,complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including jointing to waste pipe fixed in sement concrete 1:2:4 type B 1 in repair with oval access door bore complete all as specified and directed
Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.
Supply only of Liquid water proofing compound of approved make complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.
Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 10 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for applying three coats of white wash on newly plasterd or unplasterd ceiling surfaces including preparation of surfaces,complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.
Preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming for down or steel wire brushing, scrapping down make spots, trating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed.
Preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of acrylic distemper complete all as specified and directed.
M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of acylic distemper on walls by using roller / spray machine complete all as specified and directed.
M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying two coatsof synthetic enamal paint on old steel surfaces, complete all as specified and directed.
M&L for preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamal paint on old decorated wooden surfaces, complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthethic enamel paint on plasterd surfaces walls complete all as specified and directed.
Disconnecting existing tanks of capacity in liters exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).
Cleaning of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity including removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and directed
Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly)
Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass complete all as specified and directed
Supply only spindle brass for 15 mm dia CP Bib cock/ pillar cock/ concealed cock of any pattern complete all as specified and directed.
Supply only capstan head / cap of CP bib tap / CP stop cock 15 mm size complete all as specified and directed.
Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed
S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
S&F in repairs jet spray, cp brass body with wall hook and 1 mtr SS pipe complete all as specified.
S&F in repair complete Veta washer set (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as directed.
Fixing only in repair low level flushing cistern any capacity after carrying out minor repairs such as stopping of leakage etc. complete all as specified and directed.
S&F in repairs tank nipple of suitable size at required on ground complete all as specified and directed by Engineer-in- Charge
M&L for brass chromium plated bottle traps(32 mm dia) for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixed complete all as specified and directed by Engineer-in- Charge
S&F in repairs PVC waste pipe with socket suitable for connection to waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed by Engineer-in- Charge.
S&F in repairs cp grating of best quality of siz 75/100mm complete all as specified and directed by Engineer-in- Charge
M&L for asbestos cement plain building boards(6 mm thick), fixed to timber framework with screws .
Runing welding in repairs having thickness of metal to be welded not exceding 6mm
S & F in repair 3.8 mm dia galvanised steel wire,50* 50mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed by Engineer-in-charge
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-charge
S&F in repair Stainless steel fancy type peg set of four and fixed in position with steel screws complete all as specified and as directed by Engineer-in-charge
S & F in repair floor 150 mm length floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in floor work complete all as specified and directed by Engineer-in-charge
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
SAPNA BUILDERS
M/s PANKAJ KUMAR
M/s GURFATEH BUILDERS
M/S SAI BUILDERS
G N CONSTRUCTIONS
sunrise engineers and contractors
ABHINANDAN ENTERPRISES
BALAJI CONSTRUCTIONS
FAQIR CHAND
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .