GE/863/EWS-T-49/2019-20

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

M&L for 25mm thick leveling course in Cement concrete 1:2:4 type B-0, (12.5 mm graded aggregate) complete all as specified.

M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished ,area of each tile not exc. 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, in vertical surfaces, over and including 10 mm thick cement plaster in cement mortar 1:4 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Non-skid ceramic tiles, coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sq m but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L for Non-skid ceramic tiles, coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Glazed ceramic tiles, colour tile, in vertical surfaces, 300 X 200 X 7 mm thick over and including 10 mm thick cement plaster in cement mortar 1:4 as backing of wall tiles etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for 75 mm thick Sub Base in Cement concrete 1:4:8 type D-2, (40 mm graded aggregate) complete all as specified.

M&L Reflective chequered cement concrete tiles 30cmx30cm x 25mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6, over new or existing sub-base in floors complete all as specified.

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (20 mm graded aggregate), as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified.

M&L for taking down cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with Liquid WPC, finished even and fair, complete all as specified. (Note : Liquid WPC shall be measured and paid separately)

Supply only liquid water proofing compound, complete all as specified.

M&L for Preparation of new plastered surface and applying two coat of oil bound distemper with hand roller over primer to receive distemper over 1mm thick wall care Birla putty complete all as specified.

M&L for Preparation of old plastered surface ,complete removal of existing treatment of wall surface and applying two coat of oil bound distemper with hand roller over primer to receive distemper over 1mm thick wall care Birla putty complete all as specified.

M&L for Preparation of new plastered surface, applying two coats of weather resistance acrylic emulsion over a coat of primer complete all as specified.

M&L for complete removal of existing treatment on walls including washing down, rubbing down and applying two coats of 100% weather resistant acrylic emulsion paint over a coat of primer Red border as specified.

M&L for preparation of new wall surface, and applying three coat of white wash complete all as specified.

M&L for preparation of old wall surface, and applying one coat of white wash complete all as specified.

Dismantling Framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified.

S&F rolled mild steel Fe -290(Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats riveting , bolting , welding etc.complete all as specified.

Dismantling of wall and ceiling boards( fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified.

S&F 10 mm thick PVC insulation panels with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling, including GI frame work for seamless ceiling grid frame work, size of grid 605 X 605 mm for false ceiling, hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specified.

Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

S&F Wire netting of galvanized steel wire 1.40mm dia and size of mesh 25 mm fixed with tinned tacks of wire staples complete all as specified.

Taking down and removing Chowkats or frames not exc. 1.5 sqm with shutter (without taking off shutters from the frames) complete all as specified.

Taking down and removing Chowkats or frames exc 1.5 sq. m but not exc 4 sq. m with shutter (without taking off shutters from the frames) complete all as specified.

Taking down shutter exc 1.0 sqm but not exc. 2.0 sqm each complete all as specified.

S &F 2nd class hard wood Plain, solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

S&F 2nd class hard wood 35 mm thick plain, framed, panelled shutters(any no of panels) with panels of timber flat on both sides (feather edge) or of veneered partical board medium density, wood particle board with commercial face veneers; supply and fix two chowkats complete all as specified.

S&F 2nd class hard wood 30 mm thick Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkat complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC printed sheet & edges will be painted to match with printed sheet ,reinforced with M.S. Square tube, in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading in the frame at site as per specification & drawing complete all as specified.

S&F Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified.

M&L two coats of synthetic enamel paint over one coat of pink primer including preparation on wood or wood based surfaces of any description on new or previously untreated surfaces exc. 10 cm width or girth complete all as specified.

M&L one coats of synthetic enamel paint including preparation on wood or wood based surfaces of any description on old surfaces exc. 10 cm width or girth complete all as specified.

M&L one coats of synthetic enamel paint including preparation on steel or steel based surfaces of any description on old surfaces exc. 10 cm width or girth complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F 300 mm Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminum alloy and fixed complete all as specified

S&F 100 mm Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified.

S&F 200 mm Aluminum anodized, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150 mm Aluminum handles, cast type, anodized complete all as specified.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified .

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M& L for Pre-cast cement concrete block masonry with solid block exc 10 cm in width type C1 1:3:6 (20 mm graded stone agg) set in CM 1:6 complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including necessary formwork to retaining wall/steps complete all as specified.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified.

M&L for reinforced cement concrete (Nominal Mix) 1:2:4 Type B1 (20 mm graded aggregate) as in lintel over 1.5 M span, Beam etc complete all as specified.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Use & waste of formwork to chajjas and similar work; complete all as specified.

S&F in repair Vitreous china squatting pan 'Orissa pattern' size 580X 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor fixed in repair complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, including flush pipe of polyethylene of low or high density or PVC 32 mm dia., plastic water closet seat closed pattern with cover and hinging device and trap with connection in repairs complete all as specified.

S&F Chromium plated jet for EWC complete all as specified.

S&F in repair 10 Ltrs PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any in repairs complete all as specified.

S&F in repair Vitreous china wash basin, white, flat back, size 550 X 400 mm including fixing with brackets exclusive of fixing of supply and waste pipe and 32 mm chromium plate waste fitting with long screwed shanks and fly-nuts complete all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm in repairs complete all as specified.

S&F in repair Low density polyethylene (LDPE) pipes, 32 mm bore, of pressure rating 6 Kgf/ Sqcm as in waste pipe in repairs complete all as specified.

S&F in repair Bib taps, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube fixed in repair complete all as specified.

S&F in repair centre hole wash hand basin mixture pop-up chromium plated quarter turn complete all as specified. Make: Prayag (i) Ripples Cat No: 8650 (ii) Mist Cat No: 8550

S&F in repair Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to15 mm bore steel tube in repairs complete all as specified.

S&F in repair Brass CP mixer (wall mixer) for mixing of hot and cold water screwed down for iron pipe and fix in repairs complete all as specified.

S&F in repair Brass chromium plated shower rose 125mm size for iron pipe or for unions and fixed to 15 mm bore steel tube in repairs complete all as specified.

S&F in repair Aluminum anodized tubular towel rail, 20 mm dia., D type, 60 cm long between flanges in repairs complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F Soap dish, cast copper alloy, chromium plated with screws complete all as specified.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store complete all as specified.

S&F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Labour only for fixing 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs including necessary fittings complete all as specified.

S&F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

S&F in repair 1000 Ltrs capacity, rotational moulded polyethylene water storage tanks double moulded (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I, including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore steel tube and dismantling existing water tank and removing complete all in repair as specified.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

M&L for Removing excavted material to dist n.exc 50m where directed at a level n.exc 1.5m from the starting point complete all as specified and directed.

M&L for 100 mm PCC 1:4:8 type D2 (Using 40mm graded stone aggt) as in subbase complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M-40 Grade, with grey cement and no pigment, over new subbase complete all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Cement concrete type B-1, 1:2:4 (20mm graded aggregate), in plinth courses, Kerbs and the like including weathering, slightly rounded or chamfered on edges and throating incl necessary form workcomplete all as specified.

Taking down old U/S aluminum /copper point wiring (light , fan , socket, or power ) complete incl fittings and fixtures such as switches , ceiling rose ,pendents , regulators , sockets , light fitting etc and making good disturbed surfaces of walls floors etc all as directed by engr in charge .

Taking down U/S main switches , DB's /change over switch along with teak wood boards etc and making good the disturbed surfaces of wall /floors to match the existing surfaces all as directed at site

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified.

One light point controlled by one switch

One fan point controlled by one switch

One bell point controlled by one switch

One socket 3 Pin 5 A pin socket outlet 5Amps on same board with cables 1.5 Sqmm size

One socket 3 Pin 5A pin socket outlet 5Amps on independent board with cables 1.5 Sqmm size

All as per item No 83 hereinbefore but for socket outlet 3 pin 15 Amps on independent board with cable size of 4 sqm and earth continuity conductor cable of size 2.5 sqmm.

S&F switch piano flush type single pole one way 5/6 Amps.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Angry-in-Charge.

S&F socket outlet 2 in 1, 6 pin 5Amps & 15 Amps 2 in 1 flush type.

S&F switch bell push flush type single pole one way 5/6 Amps.

S&F Bell Ding Dong AC 230 Volts, single Pole.

S&F ceiling rose surface type 3 terminals to be fixed on PVC block.

M&L for lamp holder PVC/Polycarbonate typr with back plate suitable for batten fittings/angle fittings.

Supply and fix electronic fan step regulator flush type 120W.

Supply and fixing LED lAMP 9 W system lumen (NOM) 600 with all accessories all as specified and directed by Engg-in-Charge. Make:CG Cat part No-LSW-12W-CDL-BC or equivalent make as specified in Appx 'B'.

Supply & fixing LED Bulk Head light 10Watt complete with opal diffuser a highly cost effective , compact, ultra low energy modern design utility bulkhead suitable for indoor and out door applications with IP 65 protections Make CG,Cat Pt No -LBHE-1-CDL or equivalent

Supply and fixing surface & wall mounted LED batten 2 feet with extruded aluminum housing and robust construction 10 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: Philips catalogue no. BN021 LED10S-6500 PSU GRS1 or equivalent of Wipro and CG

Supply and fixing surface & wall mounted LED batten 4 feet with decorative end caps with extruded aluminum housing and robust construction 18 W system lumen (NOM) 2000 with all accessories all as specified and directed by Engg-in-Charge. Make: CG catalogue no.-LCTL-18-CDL or equivalent of Wipro and CG

Supply and fixing of LED Aerion -II panel 2'x2' light fitting for recess mounting of capacity 36 Watt glare free uniform illumination with longer life and less maintenance all as specified and directed by Engr-in-Charge Make- CG cat part No-LTCLRN-30-FO-CDL or equivalent of Philips/Bajaj

Supply and Fixing PVC Body sound proof Exhaust fan 300 mm size with single phase 230 Volt 900 RPM with louvers complete. making a hole in wall and after finishing work disturbed surface of wall complete all as specified and directed by Engr-in - Charge.

M & L for sub main wiring (surface) complete with Two single core 06 Sqmm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia PVC casing capping accessories including elbow , tee one single run of 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as specified and directed by EIC. (Service bracket to main DB )

S&F sheet metal enclosure for DB, 240 Volt 12 way double door with copper bus bar neutral & earth bus all as specified.

S&F sheet metal enclosure for DB, 240 Volt 8 way double door with copper bus bar neutral & earth bus all as specified.

Supply and fixing MCB SPN 40 Amps single phase 240 volts rupturing cap 10 KA 'C' series including making connection complete all as specified.

Supply and fixing MCB SP 6-32 Amps single phase 240 volts rupturing cap 10 KA 'C' series including making connection complete all as specified.

S&F in repair Earthing complete with galvanised iron earth plate electrode 600 mm x 600mm x 6 mm thick, burried directly and preferably vertically in groun, earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanised earth wire 4 mm dia by means of nuts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20 mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternatelayer of 15 cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20 mm graded aggregate), 50 mm thick precast RCC (1:2:4) cover slab (reinforced with 8 mm dia TMT bar @ 15 cm c/c bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50m etc all as shown on electrical plate no. 3 of SSR Part - I (2009) complete.

S&F GI tubing 20 mm dia light grade with all fittings laid in trenches for protection of earth wire

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 16 Sqmm.

S&F House service bracket hook type complete with 40mm GI Pipe 3.0 m long 90 degree bends, M.S hook and stay or guy.

S&F water heater storage type with multifunctional safety valve, electric operated 230V, single phase complete including one no of heating element, thermostat and indicator lamps and all safety device of capacity 25 liters including provn of hot and cold water pipe, NRV, grouting nut, bolts in walls and making good distrubed surfaces. Make :- Indo / bajaj / Recold / Havells with ISI Marked and 5 star rating.

Net Contract Sum will be after deducting Sch Of Credit of Rs 38980.00

Pankaj Builders