Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC OK | |
| 2 | L2₹18.9 L+₹2.4 L (14.4%)Accepted-AOC | L2 | Accepted-AOC OK | |
| 3 | L3₹20.2 L+₹3.7 L (22.3%)Accepted-AOC | L3 | Accepted-AOC OK | |
| 4 | L4₹21.5 L+₹5.0 L (30.3%)Accepted-AOC | L4 | Accepted-AOC OK | |
| 5 | L5₹22.8 L+₹6.3 L (38.3%)Accepted-AOC R O ZANGSTI LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L5 | Accepted-AOC OK |
Tender Value
₹16.6 L
EMD Value
₹33,200
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Partapur
GE Partapur
Special repair to Bldg No T-223 ORs Bathroom Toilet at 219 I Fd Wksp Spl Under GE Partapur
2023_MES_620810_1
GE/P-59/2023-24
Open Tender
Civil Works
Item Rate
275 days
GE Partapur
As per tender documents and NIT
8 documents required · 8 mandatory
₹500
GE Partapur
₹33,200
Yes
3 Feb 2024
27 Sept 2023
20 Oct 2023
27 Sept 2023
18 Oct 2023
11 Oct 2023
29 Sept 2023 - 4 Oct 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level).Complete all as specified and directed.
Taking down chowkhat or door frames including shutters n exc 1.5 sqm each complete
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified & directed.
Taking down shutters of any description n.exc 1.00 sqm and removing from site all as specified & directed.
Demolition of Brickwork or stone/ boulder masonry/ PCC block masonary , built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
Excavation in post holes ( or similar holes) in Hard/dense soil ,each not exceeding 0.50 cubic meter in any type of soil , getting out, retruning filling in watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and removing surplus soil to a dsitance n.exc 50 mtr and making good surface.
M&L for 1:2:4 Type B-2 (40mm graded stone aggregate) Cement concrete in foundations, filling and mass concrete complete all
M&L Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate).
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.
M&L 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone agg. as in sub-base/under flooring complete all as specified and directed.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.06 Sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry over screed bed or bedding layer of cement mortar 1:4, 15 mm thick and pointed in white or coloured cement to match complete.
S&F Roof trusses (framed), trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) all as specified.
S&F for wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F Compound girders and stanchions, lattice girders, aerialmasts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars etc.Fe 410-W (Gde-E- 250) quality-A.
S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. Fe 410-W (Gde-E- 250) quality-A.
S&F Plain, galvanised, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as spd and as drected.
S&F Galvanised MS sheeting of 0.63 mm thick corrugated with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275 all as spd and as drected.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.
All as per above item No. 19.00 but single coat on old steel surfaces incl preparation.
S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated.
M&L for 30mm thick IInd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain, chemfered fitted with cut and mitred beads for securing glass, etc fitted to chowkat
M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.
All as per above item No. 23.00 but single coat on old wooden surfaces incl preparation.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty / wooden beeding in square n. exc 0.5 sqm each panes complete all as specified
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 75mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved.
S&F 75mm aluminium handles, cast type ,anodised and pattern/design as approved.
S&F for 100mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed
S&F for 75mm long butt hinges mild steel medium weight cold rolled complete all as specified & directed
S&F 200mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
M & L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base coarse complete
M&L for Chequered cement concrete tile 20cmx20cmx 25mm thick ,set and jointed over 20 mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey pigment cement and pigment complete
M & L for Providing, cement concrete 1:2:4 type B-1(20 mm graded stone agg) in rounded or chamfered on edges , bed plates, kerbs , water troughs and the like including slightly rounded or chamfered angles as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick back coat in cement mortar 1:3 complete all as specified.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store.'
S&F for 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia complete, all as specified & directed.
S&F 75mm dia, Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specefied and directed
S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.
S&F in repair brass chromium plated tubular towel rail , 20mm dia in repair complete all as specified & directed
S&F in repair Bib taps chromium plated , cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair 15mm bore complete all as specified
S&F in repairs 15mm Stop valves / Angle valve, fancy type CP, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge.
S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F for in replacement vitreous China squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rests including P or S trap and making connection to trap and flush pipe and making good the floor to existing specifications complete all as specified.
S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified.
S&F in repair PVC (SWR) bend 110mm bore of any redius complete all as specified & directed.
S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified.
S&F grating doom 100mm dia PT MT weight 25gms
Dismantling water tanks of capacity exc 500 ltrs & n.exc 1000 Ltrs and removing to store.
S & F puff water tank 1000 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform, complete all as specified and as directed.
Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as perconditions separately) and making good disturbed surfaces of walls, floors, etc. and complete all as specified and as directed by Engineer-in-Charge.
Taking down of MCB DB any type including MCB SP/SPN and making good to existing surface complete all as specified and directed
M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board of suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.
(a) One light point controlled by one 5 Amps one way switch
(b) One 3 pin socket outlet 5 Amps on independent board
(c) One 3 pin socket outlet 5 Amps on same board
All as per item No 58 above but for one 3 pin socket outlet 15 Amps independent with cable of size 2.5 Sqmm for point wiring and 1.5 sqmm in continuous earth wire complete all as specified and directed by Engr-in-Charge.
S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.
S&F socket outlet 3 pin, 5 Amps, 1 flush type suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.
S&F switch socket combination 2 in 1, 3 pin, 15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and dirted by the Engr-in-Charge.
S & F in repair lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and dirted by the Engr-in-Charge.
S & F in repair PVC rectangular block for mounting of switches, socket with 3 mm thick plastic laminated sheet cover of size 200x150x50mm complete all as specified and dirted by the Engr-in-Charge.
S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.
Supply and fixing MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing Rechargeable LED Bulb energy saver 9 W ,B22 (220-240 V) 50 hz, 6500k, fast charging 2200 mAH battery inbuild ,white color all as specified and as directed. Make- Phillips stellar bright or equivalent
S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed.
M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.
Taking down the existing cables from trenches of any size all as specified and directed
Supply, laying,fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 10 Sqmm x 2 Core cable.
Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in hard/dense soil complete all as specified and as directed by the Engineer in charge
Returning filing in including spreading, leveling watering and well layers n.exc 25 cm width, complete all as specified and directed by Engineer-in-charge.
Removing excavated material n.exec.50m and depositing where directed at level n.exec. 1.5m above the starting point
M & L Sand cushioning to the under ground electric cable 8 cm before laying the cable and 15 cm after laying the cable complete all as specified in clause no 19.75 of SSR Part-I, 2009, complete all as specified and as directed by Engineer-in charge
M & L for Un-reinforced precast factory made concrete cable covers, class LV Type-I, with flat size 250 x 150 x 40 mm complete all as specified and directed by Engineer-in-charge.
S&F of water heating system/Hamam of capacity 500 Ltrs with Electric operated or Diesel/kerosene burner of 5 inch with boiler and Diesel/kerosene tank Inner sheet made of 10 SWG mild steel sheet and outer sheet shall be made of 16 SWG of mild steel sheet. Glass wool insulation of 25mm thickness to be provided between outer and inner sheet. 100mm dia MS pipes is to be be fitted in centre which will act as heater. One direct water connection for inlet of water. Funnel for pouring water manually to be provided. One over flow pipe, 3 outlet of hot water from the boiler to be provided. Inner chamber is to be painted with boiler paint and external steel surface are to be painted with two coats of synthetic enamel paint over a coat of red oxide incl necessary components like stand for hamam, stand for fuel tank and fuel pipe for connecting burner, diesel/kerosene tank etc, complete all as specified and directed by Engineer-in-Charge.
Deduct Schedule of Credit of Rs (-) 87,202.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.
CHHIRPON BUILDERS
M/S MOHD MUSSA
M/S MUNEER HASSAN AKHON
MS SHOWKAT ALIJOO
osho traders
M/S HONY CAPT RIGZIN SAMPHEL
M/S LIBE & CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .