Face lifting and other allied work of EP-298 at Wazarat Road, Jammu. CNO-564 NP

Labour engaged for removal of unwanted vegetation by engaging labour (2 labour for 3 days )

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 9.1.7 Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 9.6.3 Second class deodar wood (35mm thickness)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.3 Second class deodar wood (35 mm thickness)

9999.2473180 Providing and fixing of ply 19mm thick complete)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. .16.2 Hot finished seamless type tubes

Providing and fixing welded mesh of superior quality 1.5 x 1.5 incl all cutting fixing welding complete job as per direction of Engineer in charge

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing of 1mm thick mica complete job.

Providing and fixing 6mm ply of approved make and quality (Green/Century/Archid) including fixing carriage etc. complete as directed by Engineer in charge.

9999.1080494 Providing and fixing 4mm thick straight line teak ply including cutting, wastage, fevicol, nails, carriage etc. complete (Green, Century, Archid)

9999.1767910 Providing and fixing Nickel plated M.S. Pipe curtain rods 25mm diameter.

Renewing glass panes and re-fixing existing wooden fillets: 14.8.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type)

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters leVELWith cement mortar 1:4 (1 cement : 4 coarse sand)

French spirit polishing, one or more coats on old work

Providing and fixing of PVC wall panelling of approved quality and make.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.1 1 mm thick

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.13.70.1 Two or more coats on new work

Providing and fixing of Hand jet Jaguar 573 incl. necessary fittings and fixtures etc. complete.

Providing and fixing of Bend Mixer including necessary fittings and fixtures etc. complete. (Jaquar No. 29281)

Providing and fixing wooden flooring of superior quality action teas make are Equilent including pvc sheet and foam complete.

9999.1174070 Engaging welder for works including welder set with rod and electrods etc. complete (1 welder for 2 days )

Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and fixing Angle valve Jaguar 15mm heavy duty (FUS-CHR -29053

Grinding of marble /chips /granite flooring with grinder and vaxing complete job

Site clearance after completion of work by engaging labour

Please Enable Macros to View BoQ information