Yearly General Repair Work of two and four Wheel Tankers

Amount

Complete opening, fitting and Replacement of Heavy duty double plate folding Disk (As per size sample) of Four wheel & Two wheel Different Cap. Tankers Not :- Tyre size 7.50 * 16

Complete opening, fitting and Replacement of Disk Bolt (As per size & sample ) of Different Cap.,Tankers.

complete opening, fitting and Replacment of Tanker Hub with Nut Bolts Complete set.

Complete opening, fitting and Replacment of Hub Bolt (As per size & sample ) of Diffrerent Cap. Tankers.

Dismanting of tankers wheel excel and metal depostit on excel hub bearing seat both side and machining as per bearing size and making new excel check nut as per new size And refitting of bearings, hub disk etc complete.

Providing & fizing of following iteam of two & Four wheel Tankers. (1) Hitch Hook (As Per Size & sample)

Hitch Hook (As Per Size & sample)

Hitch plate welding & Replacement Work

Complete makign and fabircation work of tow wheel different cap. Tankers stand. By using Angle 50* 5 m.m box of length 0.67 Mtr., 08 m.m. thick - 3 Nos. side support plate as per size, pin -1 No., lock with chain -1 No. and 55 m.m thick base plate - 1 No. complete welding and fitting on tanker chassis.

Repairing and refitting of leaf spring set of size 1 Mtrs. Of 2000 lit. & 4500 lit cap. Tankers including tensioning, greasing, and replacement of following parts (As Per size & sample)-

Male spring leaf

Female spring leaf

1st No. Spring leaf

2nd . No spring leaf

Center bolts

U Bolts set

MS Clip with bolt 6 Nos. set

Shackle assembly with required pin spring and hardware etc.

Complete repairing of 4500 lit. Cap four wheel Tanker turning Table by cutting of damaged angles ring and cross channel support by gas cutter without damaging The tanker chassis and complete grinding, finishing and making new turning table by using of 75 * 40 m.s channel cross support, welding with 2 Nos. M.S Angel 35*5 m.m, ringes as per required size with upper and lower sides of trolley including providing and fixing of center plate of size 20 cm * 20cm. * 5 m.m. thick- 2 Nos. , 40 m.m dia. Cente bolt - 1 Nos, lock pin 1 Nos. and complete greasing of turning table rings.

Complete making New water tapping arrangement of differenet cap. Tankers by using 50 m.m, dia. G. I pipe-1 Mtrs. Long (approx.) connected with 50 m.m. dia G.I> Tee - 1 Nos., Socket - 2 Nos. and Caped Socket - 2 Nos. at both end of pipe. And 25 m.m. dia G.I socket - 4 Nos. welded on main pipe and 25 m.m. dia. CICP Tape Cock should have also be fixed on socket. And complete water tapping arrangement welded with the chasisis of tankers by MS bar and painting by one coat of silver oxide paint.

Complete opening, fitting, greasing and replacement of following Items of different Cap. Tankers (1)Tapper Roller Bearing No. 32216 of Tankers (SKF make.)

Tapper Roller Bearing No.32213 of Tankers (SKf make)

Complete Opening, fitting & replacement of oil seal & wheel cap

Replacement of 50 m.m. GI Caped Socket of water tapping arrangement.

Complete cutting of the old damaged socket and tape cock of Tanker by gas cutting or welding witout damaging the 50 m.m. dia. Main pipe grinding, fisnishing and welding new 25 m.m. dia. G.I socket and 25 m.m. dia. CICP Tape cock on main pipe of water tapping arrangement of Tankers.

Complete opening, fitting and tensioning of size 1.3 Mtrs. Leaf spring sets of 3500 Lit. Cap. Two wheel Tankers providing & fixing of following parts (As per size & sample) --

Male spring leaf.

Female spring leaf

1st No. Spring leaf

2nd . No spring leaf

Center bolts

MS Clip with bolt 6 Nos. set

Shackle assembly with required pin spring and hardware etc.

U Bolts set