SPL REPAIR TO BUILDING NO P 64 AND P 86

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R PORTION)

Repairs to structural members like columns, beams, slab by removing the corrosion from reinfrocement and applying one coat of nito zinc primer or equivalent to renforcement and applying one coat of NITOBOND SBR or equivalent to old concrete and applying cement concrete 1:1.5:3 using 6mm aggregate and approved Fosroc or equivalent chemical for additional strength including necessary formwork chicken wire mesh as required the thickness of concrete is 15mm to 50 mm as per requirement at site (Nitobond EP & Nitobond SBR).

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as directed.

M/L for rendering 10mm thick in cement mortar 1:6 and 2nd coat of 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M/L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement

M/L for rendering 5mm thick in cement mortar 1:3 on Ceiling brick / concrete surfaces, finished even and smooth without using extra cement

M/L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as Manufacturer instruction and as directed.

Preparation of new plastered surface of wall with chalk whiting and applying two coat of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and as directed.

M & L for Preparation of new plastered surface of Ceiling and applying three coat of white wash on Ceiling all as specified.

Taking down existing roof treatment roughening surfaces of old concrete floor/roof by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3 Kg of cement per sqm complete all as specified.

M&L for padding concrete 25mm thick, Type B-0, 1:2:4 (using 12.5mm graded stone aggregate) complete all as specified.

M & L for roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a coat of primed and bonding surface by forced application, including Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed.

Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises all as specified and directed.

M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:6 complete all as sdpecified and as directed.

M & L for rendering to brick/ concrete surface 10mm thick in cement mortar 1:4 surfaces finished fair and even and scoured for fixing tiles/ stone slabs etc complete all as specified and as directed.

M/L for non skid ceramic coloured tiles 300 mm x 300 mm x 7 mm thick in floors, etc. set and jointed in neat cement slurry and pointed in cement to match.

M& L for Non - skid joint free Ceramic tiles 600 mm x 600mm 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed .

M/L for glazed coloured ceramic joint free tiles 350 mm x 250 mm x 7 mm joint free thick in dado and skirting etc. set and jointed in neat cement slurry and pointed to match.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as dierected.

M&L for plain cement concrete 75mm thick type C-1 1:3:6 (using 20mm graded stone aggregae as in path,plinth protection or hardstanding complete all as specified.

Material and labour for PCC 1:4:8 Type D-2, using 40mm graded aggregate as in filling in flooring complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in manholes cover slabs, etc, and set in CM 1:4 including necessary form work all specified.

M&L for mild steel TMT bars (Fe 500 D) 10mm dia and over, cut to length, bent to shape as reqd, including cranking, bending srirally for hooping for columns, hooking ends binding with and including MS (annealed) wire not less than 0.9mm dia or securing with clips all as specified.

Supply and fix in repairs white Vitreous china EWC pedestal pattern with "P" or "S" trap complete all as specified and as directed. Make:Hindware Cat part No. 20044 or equivalent model of make list as per Appx 'B'.

Taking down of steel tubing 15mm dia of pipe and connections removal to store complete all as specified.

Taking down of steel tubing 20 mm dia of pipe and connections removal to store complete all as specified.

Taking down of steel tubing 25 mm dia of pipe and connections removal to store complete all as specified.

Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

S & F in repairs chromium plated shower roses 125mm size with or without swivel joints complete all as directed

S & F fancy type Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete Make: Jaquar Cat Part No. FUS-29037 or equivalent model of make list as per Appx 'B'.

S&F of CP fancy type angular stop cock 15mm dia with wall flange complete all as specified & directed.Make: Jaquar Cat Part No.FLR-5053N or equivalent model of make list as per Appx 'B'.

Supply and fix in repairs PVC connection of 15mm bore and 450mm long with brass check nut and union etc complete all as specified and as directed.

Supply and fix in repairs 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S & F Towel rail, 60cm long including chromium plated brass screws and wooden/plastic cleats complete all as directed by Engineer-in-Charge Make: Jaquar Cat Part No.ACN 1111SM or equivalent model of make list as per Appx 'B'.

M & L for 75mm PVC (SWR) floor trapor Nanhi trap, plain with grating including jointing with solvent cement complete all as directed.

Taking down of rain water pipes incl all fittings

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) "T" of any radius complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

All as per Sl Item No 1.44 above but 110 mm.

Taking down chowkat with shutters (without taking off shutters from the frames) of any description exc 1.5 sqm and not exc 4.0 sqm in each panel .

Taking down chowkat with shutters (without taking off shutters from the frames) of any description n exc 1.5 sqm in each panel .

Supply and fixing powder coated aluminium frame for doors, windows with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and Fixing powder coated aluminium door shutters aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing,handles 2 nos in each door , hinges , anodised aluminium snap beading, screws and locking arrangement etc complete all as specified.

Supply and Fixing powder coated aluminium window and ventilator shutter slinding type without sash bars , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, , anodised aluminium snap beading, screws , anodised aluminium fittings such as peg stays 150 mm long(1 no), hinges type B-21 100 mm long (2 nos) suitable handle ( 1 no) in each shutter complete all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

M&L for heavy duty vitrified pavement tiles of size (300 mm x 300 mm) as in footpath set in CM (1:6) includung filling joint with white/coloured cement to match complete all as specified & directed.

Supply & Fixed 5.50 mm thick tinted sheet glass n. exc 0.5 sqm in each pane fixed to window,ventilatores complete all as specified and directed

Supply & Fixed 4.8 mm thick tinted sheet glass n. exc 0.5 sqm in each pane fixed to window,ventilatores complete all as specified and directed

S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor.

SCHEDULE 'A' PART-II (E/M PORTION)

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 4 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one bell point controlled by one 5/6 amps, one way bell push including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light point controlled by one 5/6 amps, two way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 6 Sqmm and one run of 6 Sqmm cable shall measured as one length.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 4 Sqmm and one run of 4 Sqmm cable shall measured as one length.

Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps.

M&L switch piano flush type single pole two way 5 Amp including connections.

Supply and fixing of Buzzer, Ding Dong AC. 230 volts.

M&L switch socket combinatrion 2 in 1,5 Amp flush type including connection

M&L switch socket outlet multipurpose 3 pin,15 Amps and one 5 Amp controlled by one switch

M&L ceiling rose PVC poly carbonate,isolated body with three terminals including connection.

S&F stepped type electronics fan regulator flush type 230/240V complete all as specified

M&L lamp holder angular type PVC/Polycarbonate type insulated body with back plate suitable for batten fittings.

Taking down underviceable sheet metal MCB/DB box 6 way & 8 way & main DB/main switch etc for necessary repair/replacement all as specified.

Supply and fixing of MCB DB double door made of sheet steel phosphates powder painted with bus bar, neutral link,earth bar and din rail single door type SPN 8 way 240V (Blank slots covered by Blanking plate)

All as per Sl Item No 2.20 but tripple pole and nutural 12 way,415V

All as per Sl Item No 2.20 bu tripple pole and nutural 04 way,415V

Supply and fixing isolator TPN,415 Volt 100 A.

Supply and fix MCB SPN 40 amps, 240 Volts, C series including all necessary connection with thimbles all as specified.

Supply and fix MCB SP 6-40 Amps Rating 240 volts, C series including all necessary connection with thimbles all as specified.

M&L for fixing of earth contuninity conductor or main earthing lead aluminium strip 25x4 mm with shaddle,nut,bolts etc on existing roof conductor and down conductor fixed with and including fixing accessories and connecting to ground conductor complete.

Taking down fan ceiling cable end, dismantling blades and removing fan and blades and deposit to store complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).

Supply and fixing in repair LED Polycarbonate T8 Tube with in built driver with metal heat sink double sided connection of capacity 1x 20 watts.

Supply & fix LED Bright 17 Watt LED Bulb, Base B22,Cool Day Light oval shape complete all as directed

Supply and fixing LED Building security light fitting of capacity 30 watt, new compact designed for the most effective thermal management IP 66 with highly effective and efficient lighting solution high power LED Building Security light including provn of necessary connection complete including taking down olf building security light.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level ) connected to galvanized earth lead strip of size 25 mm x 3 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I including taking down old one , and all as directed and specified

Rekha Enterprises

vaishnaveedevienterprises

M/SNeelachal Enterprises

MS MISHRA ENTERPRISES

Rounaq Enterprise

M/S T.N.CONSTRUCTION

M/S JANAKI ENTERPRISES

Bidder Name

Rounaq Enterprise

Rekha Enterprises

M/S T.N.CONSTRUCTION

DANWAR AND ASSOCIATES

MS MISHRA ENTERPRISES

M/SNeelachal Enterprises

M/S JANAKI ENTERPRISES

vaishnaveedevienterprises