WC-008/22-23 Paramankuruchi Feeder Kayamozhi Section

Amount

Excavation & Erection of Stay pit 4.5' to 5' depth by using JCB or manual in Rocky ground

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual in normal ground

Erection of 9 mtr PSC poles by using JCB or maual

Fixing of 3.6" "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Erection of Tapping channel X arm

Fixing of HT/LT TI Fittings

Fixing of pin Insulators with Pin 11 KV

Fixing of 11 KV strain disc.

Fixing of LT Shackle

Numbering of poles including base painting and with cost of paint

Earthing of pole with pin including burying looping and binding

Paving of Conductor, stringing, binding Jumpering etc., complete with 7/4.09ACSR for both HT/LT lines with LC work.

Concreting of Poles as per Board standards (2*2*5). The material such as sand, jelly, etc., have to be supplied by contractor including Cement supplied by Contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour Charges for placing Transporting of Sand, jally, from box and water curing etc,. complete as per field Engineer's instructions.

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Erection of Single Pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

Transport of /Materials/ conductors and other materials from store to site ( for Hired Vehicle) upto 20KM

Loading/Unloading of poles upto 9 mtr PSC poles & RCC Square Pole from store road site

Transporting of 9.0mt PSC poles & 9.0mt RCC Square Pole from road site to pole pit including loading and unloading of poles by using JCB or manual

Loading or unloading of Transformer upto 16 KVA for each

Loading or unloading of Transformer upto 25 KVA for each

Transporting of Distribtion Transformer upto 20 KM

Erection of New Transformer upto 25 KVA

Erection of New Transformer upto 16 KVA

Erection of D.P. structure with AB switch top channel, cross bracing, HG fuse set, earthing, painting, providing stay and pole concreting as per field Engineer's instructions.

Alteration of Back clamp

Changing of Pin point to Cut point

Aluminium painting including labour,materials,lead,lift etc., for all types of x arm/channel/clamps/Bolt & Nut Etc., for above works

Tree Clearance

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder