ADDN / ALTN TO EXISTING STREET AND SECURITY LIGHTS TO NEW ENERGY EFFICIENT LED LIGHTS ALONGWITH CONNECTED ALLIED SERVICES AT FSD PANITOLA INCLUDING CERTAIN REV AND MINOR WORKS AT ALL OUT POCKET AREA UNDER GE DINJAN

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre and not exceeding 3 metre depth (beyond the first 1.5 metre) for foundation of poles etc and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specified and as directed.

M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments.

M&L for bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 6 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 4 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage of 1100 Volts, PVC insulated, armoured, 3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 185 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.

S&F for 25 mm dia, rigid non metalic, PVC conduits "medium grade" complete with all accessories suitable for UG cable laid in trenches complete all as specified and as directed.

S&F for service cable, 1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core stranded conductor of 2.5 Sqmm nominal cross sectional area complete all as specified and as directed.

Boring of holes horizontally for laying not less than 40mm pipe (minimum depth 0.75 mtr from top level) under the road pavement, hardstanding using trenchless technology complete all as directed. Note: Cost of accessories required for making hole/bore deemed to be included in the quoted rate.

M&L for 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in UG cable protection complete to walls and ceilings or laid in floors complete all as specified and as directed.

M&L for 32 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in UG cable protection complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down LED/CFL/sodium vapour/metal halide/MV lamp street light/flood light/ any other light fitting of any make and size refixing the same in position after replacement of unserviceable/defective parts like fittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate.

S&F for LED street light fitting of capacity 100W, with pressure die cast housing, toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes /clamps and nuts & bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : Cat No. TRP-411-100-57-SL-GL-NSG of Crompton/ CENTURY/ Jaquar/ Phillips/ Havells . Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor. 2. Necessary excavation, PCC work, bracket, connecting wire will be measured and paid separately under relavent items.

S&F for LED street light fitting of capacity 90W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : Cat No. SPOR090C0809 of Century/ Crompton/Jaquar/Phillips/Havells. Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items

S&F for LED street light fitting of capacity 70/75W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : Cat No. SPOR072C0807 of Century/ Crompton/Jaquar/Phillips/Havells. Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor 2. Necessary excavation, PCC work, bracket, connecting wire will be measured and paid separately under relavent items

S&F for LED street light fitting of capacity 60W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : Cat No. SPOR060C0805 of Century/ Crompton/Jaquar/Phillips/Havells. Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor. 2. Necessary excavation, PCC wk, Bracket, Connecting wire will be measured and paid separately under relavent items.

S&F for LED street light fitting of capacity 45/50W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including with necessary brackets / pipes/ clamps and nuts & bolts for holding the street light fitting and twin core aluminum cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : SPBL046C2126 of Century/ Crompton/ Jaquar/ Phillips/ Havells. Note: 1. Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor. 2. Necessary excavation, PCC work, bracket, connecting wire will be measured and paid separately under relavent items.

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 200W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded aluminium/copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed. Make : Cat No. JETAVALOURFL200WLED757PINTWBLTG of Havells / Crompton/ Jaquar/ Phillips/ Century.

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 100W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded aluminium/copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and directed. Make : Cat No. JETA IRIS FLS100WLED757APWBLTG of Havells / Crompton/ Jaquar/ Phillips/ Century.

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 70W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded aluminium/copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed. Make : Cat No. JETA QUANTO PLUS FLP70WLED757SYMLENS of Havells / Crompton/ Jaquar/ Phillips/ Century.

S&F in repairs modular junction box made of SMC/FRP of size 250x250x155mm with provision of MCB SP and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel clamps, nuts and bolts complete all as specified and as directed. Make : Cat No. GSJB 2525 of Sintex /Hensel.

S&F in repairs LED post top lantern of 40/45 Watt made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection, including 40 Watt MH/SV lamp including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified and as directed. Make : Cat No. APBY040C0875 of Century/ Havells/ Philips/Cromption.

S&F in repairs decorative gate light 20W made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 Base, including providing and connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed. Make : Havells /Philips/Bajaj/Crompton/Century.

S&F for street light bracket arm of length not less than 1.5 m made out of GI tubing, 32 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.

S&F for street light bracket arm of length not less than 1.5 m made out of GI tubing, 25 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.

S&F for time switches digital type 415 Volt Three phase of 20 Amp rating with contactor fitted inside and MCB TPN 20 Amp, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : HAVELLS/PHILIPS/L&T.

S&F for time switches digital type 240v/ single phase of 20 Amp rating with contactor fitted inside and MCB SPN 20 A, max load of 12 KW within steel enclosure complete including connecting items complete all as specified and as directed. Make : HAVELLS/PHILIPS/L&T.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of primer except the planting depth which shall be painted with black bituminous paint including writing pole number using suitable paint complete all as specified and as directed. Note : Excavation and earth work, PCC filling shall be measured and paid separately.

M&L in repairs cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces duly breaking the old damaged and placing a new flush box for termination inside the base complete complete all as specified and as directed. Note : 1.6mm thick CRCA sheet made suncken box with terminals shall be measured and paid under relevant item.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.

M&L for hardcore of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, etc complete all as specified and as directed.

M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

S&F for MCCB, 4 pole, 415 V with adjustable thermal and adjustable magnetic setting, 160 Amps of breaking capacity 25 KA complete all as specified and as directed. Make: Cat No. CSE2M160ATM4P of C&S/ Havells/ L&T/ Legrand.

Supply, installation, testing and commisioning of borewell consist of PVC 4 inch casing, pipe and ribbed filter casing, 120 Ft deep with 2 HP submersible staged pump with motor, PVC 32mm dia column pipe, 80 Ft deep with necessary cable including testing of water from approved lab complete all as specified and as directed.

Supply, laying, connection and testing, 40mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239(Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

S&F for 40 mm bore, gun metal, gate valve non return valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply, installation, testing and commisioning of DOL starter of 2 HP capacity complete all as specified and as directed.

M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Prova Stores

R D Enterprises

M/S Karen Enterprises

M/s GANDHESWAR PHUKAN