The System Design Manufacturing Testing Supply Installation and Commissioning of Plant and Machinery Equipment Electrical and other related Works for setting up of Proposed Site Mixed Bulk Explosives Plant at Umrer Dist Nagpur MH.

Amount

PART - A (SUPPLY)

Supply of SS Hold Tank for Storage of AN/CN Melt of 103 KL capacity, MOC: SS-304 L (Bottom 8 mm, Shell 6 mm and Top 5 mm thick), size - 4500 mm dia X 6750 mm height, tank will be vertical, cylindrical flat bottom & conical self-supported roof with proper sand leveling, grouting along with Electrical Work and Piping Work with necessary fittings, accessories. The specifications and requirement of the Hold Tank and accessories will be as per the details mentioned in "Brief Scope of Work". Piston Valve- 50 NB-1 No, Solenoid Actuated Valve -50 NB- 3 Nos,Ball Float Steam Trap -25 NB-4 Nos,Globe Valve-25 NB-4 Nos, 2 way Ball Valve 65 NB- 2Nos, 3 Way Actuator operated Ball Valve 40 NB- 2Nos,2 way Ball Valve 40 NB- 1 No,2 way Ball Valve 25 NB- 2Nos and suitable Centrifugal Pump-1 No.

Supply of Electrical work – Laying of cable and electrical fixtures

Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation

Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose

Supply of SS304 Flanges 50 NB size for Process Piping

Supply of SS304 Valves 50 NB Size for Process Piping

Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks

Supply of 50NB valves for Steam Piping

CON. Reducer 50 x 40 NB, SS‐304L, #150

Supply of float type 25 NB Steam Traps

Supply of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample. Piston Valve 50 NB-2 Nos,Solenoid Actuated Valve 50 NB-4 NoS,Solenoid Actuated Valve 50 NB-4 NoS,Globe Valve -25 NB-6 Nos, 3 Way Actuator operated Ball Valve 40 NB- 1No, 2 Way Ball Valve 25 NB- 2Nos,2 Way Ball Valve 80 NB- 2Nos,3 Way Ball Valve 40 NB- 2Nos,3 Actuator Operated Ball Valve 40 NB- 2Nos and suitable Centrifugal Pump-1 No.

Supply of Electrical work – Laying of cable and electrical fixtures

Supply of SS piping of 50 NB dia long with necessary bends and fittings for Process Piping with heat tracing and insulation

Supply of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose

Supply of SS304 Flanges 50 NB size for Process Piping

Supply of SS304 Valves 50 NB Size for Process Piping

Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks

Supply of 50NB valves for Steam Piping

CON. Reducer 50 x 40 NB, SS‐304L, #150

Supply of float type 25 NB Steam Traps

Supply of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304, Plate thickness - Shell 6 mm, Flanged Flat Top 4 mm, Flat Bottom 8 mm with MS Channel Support, the blend tank will be vertical, cylindrical, flat bottom, flat flanged top, complete with 90 m, 40 NB SCH 40 spiral SS304 coil in two parts, 90 mm Dia shaft along with 02 numbers of pitch blade top entry turbine agitator at different depth, 65-70 RPM with supports, all necessary nozzle, drain, vent, support lugs and MS platform with railing and suitable ladder and 20 HP, IP 55, TEFC motor with suitable Electrical Power Switch, Gear Box along with insulation of tank by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG. Height of manhole collar to be max 200 mm so that it is within the height of channel support at the top of tank and it does not interfere during placement of tank. Manhole size required minimum 600 mm ID at the top of tank for feeding of AN & cleaning of Tank. Providing feed hopper to be fitted on manhole having square shape (approx. 1m x1m) at top and with bottom dia equivalent to manhole dia with fixing arrangement with nut & bolts of SS is required for all tanks. Other details are mentioned in Scope of Work.

Supply of SS304 Flanges 50NB for above Process Piping

Supply of SS304 Valves 50 NB Size for above Process Piping

Supply of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers

Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent

Supply of Insulated Steam Transfer Piping of 40NB MS pipe with flanges and pipe fittings form supply line to the proposed Blend tanks

Supply of Insulated Steam Transfer Piping of 25NB MS IBR seamless pipe with flanges and pipe fittings for recovery of condensates

Supply of 40NB valves for Steam Piping

Supply of 25NB valves for Steam Piping

Supply of float type 25 NB Steam Traps

Supply of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. Piston Valve 50 NB-2 Nos,Solenoid Actuated Valve 50 NB-4 Nos,Thermo Dynamic Steam Trap 25 NB-4 Nos,Globe Valve 25 NB-4 Nos,3 Way Actuator Operated Ball Valve 50 NB- 1 No, 2 Way Ball Valve 50 NB- 2Nos

Supply of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers

Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2"

Supply of oil pipe- 2" Dia, MS along with 04Nos. valves and fitting with heat tracing and insulation

Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings

Supply of 50NB valves for Steam Piping

Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate

Supply of 25NB valves for Steam Piping

Supply of float type 25 NB Steam Traps

Cable 1100V Grade Multi strand Armoured Cable as per IS:7098 (Part-1)/1988 along with Cable Gland Double compression type and Cable Lug (Aluminium) as per site requirement - 4CX16 Sq mm. Al. XLPE CABLE

Supply of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Supply of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C. Piston Valve 25 NB-2 Nos,Solenoid Actuated Valve 25 NB-2 Nos,Thermo Dynamic Steam Trap 20 NB-2 Nos,Globe Valve 20 NB-2 Nos,2 Way Ball Valve 25 NB- 2Nos, 3 Way Ball Valve 20 NB- 2Nos,Disc Check Valve20 NB- 2Nos

Supply of Basket Strainer for Oxidiser Phase, 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.

Supply of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction SS 304, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.

Supply of Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate

Supply of Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.

Supply of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, IP 55 motor with suitable Gear Box and Coupling base plate

Supply of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP, b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators

Supply of Inline Magnetic Flow Meter / Mass Flow Meter for OB SS 304, range 60 - 150 LPM of IE or equivalent make.

Supply of Inline Magnetic Flow Meter / Mass Flow Meter for FP SS 304 range 5 - 20 LPM of IE or equivalent make

Supply of Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, IP 55 motor with suitable gear box and coupling and base plate

Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Supply of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Supply of Furnace Oil / HSD unloading and transfer line with Suction line of 50 NB & Delivery line of 40 NB, SCH 10, Material of construction MS as per site requirement

Supply of Oxidizer Phase -filter - Screw Pump - flow meter line with suction line 65 NB & delivery line of 50 NB, SCH 10, Material of construction SS 304 as per site requirement

Supply of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Supply of fuel Phase (FP) - filter - Pump - flow meter line with suction line 50 NB & delivery line 25 NB, MOC SS 304

Supply of Fuel Phase - Flow Meter - Blender - 1.0 inch flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make

Supply of Emulsion Matrix transfer line from Blender to Silo - 65 NB SCH 10 SS 304

Supply of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses with Blend tank outlet - of BJ Corporation Make or equivalent

Supply of SS 304 Three Way Ball Valve 65 mm between Emulsion Matrix Transfer Line from Blender to Silo

Supply of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" for preparation of Fuel Phase, base plate, suitable hopper, starter / panel (as per site condition)

Supply of Silo for Storage of Emulsion Matrix of 24 KL (30T) capacity, MOC-IS 2062, Size-3000 mm dia X 3000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG with Epoxy paint inside Silo. 3 Way Ball Valve 125 NB- 2Nos, Butterfly Valve Actuator Operated 65 NB- 1Nos

Supply of Digital Load Cells (Mettler Toledo make) for Silo

Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Supply of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make

Supply of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 65 NB SCH 10 SS 304.

Supply of SS 304 Flanges for above Process Piping

Supply of SS 304 Valves for above Process Piping

Supply of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap

Supply of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Supply of Rotary Gear Pump with Impeller Nitrile Rubber with Electric Motor and Suitable Gear Box Make: NAPCO or equivalent Capacity :3’’ -400 LPM, Discharge :10 Bar

Design & Supply of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in brief scope of work.

Design & Supply of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 20m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.

Supply of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only

Supply of Softner EZ30 of Thermax make only

Supply of Filter EZ40 FDM of Thermax make only

Supply of Oxidation Chamber- E Z200C of Thermax make only

Supply of Mild Steel Chimney (self supported) of 300 mm top diameter and 18 Mtrs height (approx) along with flue gas duct with supporting structure, sampling collection point, platform for collection & spiral ladder up to collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable foundation

Supply of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150

Supply of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch along with MS piping from Day Tank to Boilers

Supply of 4 nos of HDPE Day Tanks for Soft Water of 3 KL capacity each, along with MS piping from Day Tank to Boilers

Supply of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with airvent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 2 nos Boilers 850 kg/hr each and 5 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)

Supply of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks

Supply of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank

Supply of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection

Supply of 50NB valves for Steam Piping

Supply of 25NB valves for Steam Piping

Supply of float type 25 NB Steam Traps

Supply of water line - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement

Supply of water line - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement

Supply of Furnace Oil - 1.5 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation

Supply of Furnace Oil - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation

Supply of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent

Supply of BOILER AREA MCC PANEL (3-Ph,50Hz,415V,Rated Current 250A, S.C Current 50KA, 1 Sec MCC with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Ammeter, Voltmeter with S/S, CT, R/Y/B & on/off Indication and O/G with on/off indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay {as per Type 2 Coordination}, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/equivalent) (The Panel will be Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, IP:54 with Powder coated panting shade: RAL 7035) (Make of MCCB/MPCB, Contactor, O/L Relay, MCB : L&T/SIEMENS/Equivalent, LED Indication Lamp/ PB/ SS : Siemens/ Teknic/ Kaycee/ Equivalent, MFM : Schneider/ Equivalent, Ameter/ Voltmeter : AE/ Rishabh / Equivalent) (i) Incoming Feeders - 250 A TP + N, MCCB with O/C, S/C Protection, Extended Rotary Handle, Aux. Contact - 1 no. (Make-L&T/SIEMENS/Equivalent). (ii) Outgoing feeders - (a) 32A TPN MCB for New Boiler FO Fired 850Kg/Hr Boiler - 4 nos. (b) 6KW Heater Feeder (32A TP MCB, Contactor and Temperature Controller for Heater for FO Pre-heating - 4 nos. (c) 2HP DOL Motor Starter Feeder for Mono-Block Pump - 4 nos. (d) Lighting Feeder (Consisting of - 6Nos. 16A DP MCB) - 1no. (Make-L&T/SIEMENS/Equivalent) (iii) Supply of separate 1 no. 250A MCCB for Main MCC Panel

Supply of 3.5 core 120 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement

Supply of 4 core 10 sq mm XLPE insulated & PVC sheathed aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (part I) along with cable gland double compression type and cable lug (aluminium) as per site requirement

Supply of 3 core 2.5 sq mm PVC insulated & PVC sheathed copper conductor unarmoured submersible flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (copper) as per site requirement

Design, Procurement, Manufacturing, Testing & Supply of 50 KL MS Tank 3500 mm dia x 5250 mm height with accessories

Supply of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. a) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves)

Supply of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. b) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves)

Supply of Pressure Switch with guide valve and pressure damper including necessary fitting.

Supply of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.

Supply of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.

Supply of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.

Supply of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.

Supply of front glassed single door powder coated M.S.Hose Box (16 X 18 Swg) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.

Supply of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB

Supply of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB

Supply of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint for 100mm NB,M.S., Medium(Schedule 40)

Supply of Aluminium Armoured Cable for supply to panel (Size – 3C X 95 Sq. mm.)

Supply of Aluminium Armoured Cable for supply panel to motor (Size – 3C X 50 Sq. mm.)

Supply of Mono block pump set to fill the Water Tank (Pump rating – 1 HP, 2900 rpm, single phase, 220 V)

Supply of GI pipe for water tank inlet pipeline 1”

Supply of earthing material i.e. GI pipe, charcoal, Aluminium Strip, Salt etc.

Supply of 300 Ltr. SS Kettle with agitator with 2 Way Ball Valve 40 NB- 2Nos, 2 Way Ball Valve 25 NB- 2Nos

Supply of Screw Pump, RDAA 492 of make Roto Pumps Ltd or suitable Centrifugal Pump for transferring kettel to tank and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.

Supply of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc

Supply of HDPE Day Tanks of 3 KL capacity

3-Ph,50Hz,415V, Rated Current 800A, S.C. Current 16/25/50KA, 1 Sec MCC (MAIN MCC IN MCC ROOM ( Panel 1) with IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter , C/T, MFM, R/Y/B & on/off indication and O/G with on/off/trip Indication ) (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing, compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a) Incoming Feeders - 800A, 4P 50KA MDO ACB with microprossor based released - 2 no.( I/C from 315KVA Transformer & I/C from D.G set). b) Bus coupler Feeders - 800A, 4P, 50KA MDO ACB with microprossor based released - 1no., c) Outgoing feeders - 630A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos, & 400A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos, & 160A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 3 Nos & 100A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No. & 63A TP, MCCB with O/C, S/C Protection (microprossor), Extended Rotary Handle, AUX. & trip alarm Contact- 2 Nos. & 32A TP, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, AUX. & trip alarm Contact- 1 No.

3-Ph,50Hz,440V, 260 KVAR CAPACITOR PANEL (Panel 8) IN MCC ROOM with IP54 protection with Aluminium Bus Bar consisting of following feeders, (L&T/SIEMENS/Equivalnt) (Floor mounting, Free Standing compartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with powder coated panting shade : RAL 7035) a)Incoming Feeders - 630A, TP 50KA MCCB with Extended Rotary Handle - 1 no. b) Outgoing feeders - 50KVAR - 4 Nos, 25KVAR- 1 No., 15KVAR - 1 No., 10KVAR - 1 No., 5KVAR - 1 No. (The Capacitor Panel will be with 7 Stage Automatic Power Factor Correction Relay and auto/manual provision and each bank feeder consist with Suitable rated fuse, Capacitor Duty Contactor, Push Button, LED Indication Lamp, Timer etc.

BOILER AREA MCC (Panel 2) (3-Ph, 50Hz,415V, Rated Current 160A, S.C. Current 16/25/50KA, 1 Sec MCC with IP54 Protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C feeders are consisting of Digital Ammeter, Digital Voltmeter, CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No. MCB) (L&T, SIEMENS/ Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panting shade: RAL 7035) a) Incoming Feeders - 160A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 1 no, b) Outgoing feeders - 16A 50 KA 4 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos & 32A 50 KA 3 pole, MCCB with O/C, S/C Protection ( thermal magnetic), Extended Rotary Handle, Aux. Contact- 6 nos for Lighting Feeder.

PROCESS AREA - I MCC ( Panel 3) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 15 KW Star/Dalta Motor Starter Feeder - 6 nos. & 7.5 KW Star/Delta Motor Starter Feeder - 9 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos for Lighting Feeder.

PROCESS AREA - 2 MCC ( Panel 4) (3-Ph, 50Hz,415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 400A, 4P, MCCB with O/C, S/C Protection (microprocessor), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 7.5 KW Star/Dalta Motor Starter Feeder - 9 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 3.7 KW DOL Motor Starter Feeder - 7 nos., 2.2 KW DOL Motor Starter Feeder - 4 nos., 1.5 KW DOL Motor Starter Feeder - 9 nos., 100 A 3 Pole 50 KA MCCB with thermal magnetic realease- 3 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos for Lighting Feeder.

Fire pump and repair shop Panel MCC ( Panel 5) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 160A, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 37 KW Star/Dalta Motor Starter Feeder - 2 nos., 5.5 KW DOL Motor Starter Feeder - 3 nos., 125 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 6 A SPMCB- 2 nos for Lighting Feeder.

Office Area Utility Panel ( Panel 6) (3-Ph, 50Hz, 415V, Rated Current 400A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Wall / Floor mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 100A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing feeders- 63 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. & 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 2 nos. for Lighting Feeder.

Repair Shop Panel ( Panel 7) (3-Ph, 50Hz, 415V, Rated Current 63A S.C. Current 16/25/50KA, 1 Sec MCC With IP54 protection with Aluminium Bus Bar consisting of following feeders, MCC/PDB (I/C Feeders are consisting of Digital Ammeter, Digital Voltmeter , CT, R/Y/B & on/off/trip Indication and O/G with on/off/trip indication, All Motor Feeders consisting with MCCB/MPCB, Contactor, O/L Relay, On/Off/Trip Indication, Local/Remote S/S, Start/Stop PB, 1No MCB) (L&T, SIEMENS/Equivalent) (Floor/ wall mounting, Free Standing, Compartmentalizing type, constructed with 2/1.6mm thick CRCA sheet, with Power coated panring shade: RAL 7035) a) Incoming Feeders - 63A, 50 KA, 4P, MCCB with O/C, S/C Protection (thermal magnetic), Extended Rotary Handle, Aux. Contact - 1No. b) Outgoing Feeders - 32 A 3 Pole 50 KA MCCB with thermal magnetic realease- 5 nos., 2.2 KW DOL Motor Starter Feeder - 2 nos. & 1.5 KW DOL Motor Starter Feeder - 2 nos.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a) 8 way (4 + 24), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) b) 6 way (4 + 18), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 63 A 4 pole 10 kA MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. b) 32 A 4 pole 10 kA MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. c) 16 A 3 pole 10 kA MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. d) 16 A single pole 10 kA MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. e) 10 A single pole 10 kA MCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. f) 6 A single pole 10 kA MCB

Supply of D.P. structure using 2 nos. 11 Mtr. Long (200 mm x 100 mm x 5.7 mm thick) M.S. joist/beam as vertical members including their cross arms made up from M.S. channel (75 mm x 40 mm x 4.8 mm thick) and supplying the following accessories as required. a) Supplying of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required. b) 11 KV, 400 Amp. A.B. Switch (3 posts, Vertical type) - 1 Set c) 400 Amps rated horn gap fuse (3 nos) - 1 Set d) Pin insulator e) ACSR wire

Supplying of 3 x 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 11 KV grade (E) conforming to IS 7098 (Part-II) as required.

Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. a) Outdoor type for 3 x 120 sq mm

Supplying of cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of XLPE aluminium conductor cable of 11 KV grade as required. b) Indoor type for 3 x 120 sq mm

Supplying of 3.5 core 185 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 150 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 120 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 70 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 50 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3.5 core 25 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3 core 35 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3 core 16 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3 core 4 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 4 core 10 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 4 core 6 sq mm XLPE insulated & PVC sheathed Aluminium conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (aluminium) as per site requirement.

Supplying of 3 core 2.5 sq mm PVC insulated & PVC sheathed Aluminium / Copper conductor unarmoured submerssiable flat power cable of 1100 V grade conforming to IS 8130 along with cable end termination and cable lug (Copper) as per site requirement.

Supplying of 3 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.

Supplying of 4 core 1.5 sq mm XLPE insulated & PVC sheathed Aluminium / Copper conductor armoured U.G. power cable of 1100 V grade conforming to IS 7098 (Part-I) along with cable gland double compression type and cable lug (Copper) as per site requirement.

Local Push Button Control Station (Wall/ Structure mounting, non-copartmentalizing type, constructed with 2/1.6mm thick CRCA Sheet, with Powder coated panting shade : RAL 7035) - Start PB with 2NO Contact - 1 no. & Stop PB with 1NO+1NC Contact - 1 no. & 2.5Sq. Mm. Control Terminal - 6 nos.

Supply of 6" dia GI pipe ( medium ISI mark) for cable protection

Earthing Material - 40x6 mm G.I Earth Flat

Earthing Material - 8 SWG G.I wire

Earthing Material - 3" Dia 3Mtr. GI Pipe with Wire Mesh & Clamp

Earthing Material - 600 mm x 600 mm x 5 mm thick Copper Plate as per IS 3043 : 1987.

Lightning Protection - 45degree G.I Air Terminal with 25 mm GI pipe as per requirement.

Lightning Protection - 25x3 mm G.I Down Conductor

Materials for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Materials for wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required b) 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire

Materials for wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required c) 6 X 1.5 sq. mm + 3 X 1.5 sq. mm earth wire

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

2X20/22W LED Batten with suitable LED Tube Light (M/S Havells model Regal Batten or CG/Philips/Bajaj/Wipro make SS model)

Supplying 1400 mm sweep ceilling fan w/o regulator and with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply. (M/s Havells make model No. pacer/Velocity or s.s model of Bajaj/Crompton/Usha).

Supplying of 400mm sweep wall mounted exhaust fan with all other accessories suitable for operation on 220 V 50 HZ single phase ac supply (M/s M/s Havells/Comptron/Bajaj/Usha make )

Materials for wiring for AC / power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Materials for wiring for 3 phase power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supplying of 32 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 amps "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. a) 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. b) 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying of 165W LED Flood Complete Light Set of IP65 and operating voltage 140 - 270 V AC (Make : Philips ( Cat No. BVP410 LED 165 CW HE SY20 FG S3 XTFC)/Cropmton/Bajaj/Equivalent)

Supply of 9 litres capacity fire buckets with inscription of‟ FIRE‟ signal red colour i/c filling of sand ,P/F hooks,clamps etc required.( 1 set = 3 Nos.)

S/F 4.5 Kg CO2 type Fire extinguisher with suitable hose pipe and hook etc as required. ( ISI marked)

S/L of 6 mm thick rubber mat suitable for MV/HV supply (class- B category)as required. ( ISI marked)

Supply of 250 KVA Diesel Generating Set with required accessories as per the detailed specification in Annexure-A & Annexure-B along with necessary multistrand armoured cable (approx 40 mtrs.) suitable for connecting incoming supply from DG Set with AMF and MCC panel along with exhaust gas piping with necessary fittings and accessories as required

Supply of AMF Panel (Automatic Main Failure) for auto start/stop with required accessories suiting to the above DG Set mentioned in Annexure-A & Annexure-B

Earthing Material - 18" X 18" X 5 mm thick Copper Plate of electrolytic Grade as per IS 3043

Earthing Material - 3" Dia 4 mtr GI pipe with fuunnel & wire mesh & clamp for earth pit as per IS 3043

Earthing Material - 50x6 mm G.I Earth Flat.

Cable protection pipe - 3" Dia 3 Mtr. GI pipe for protection of cables (Tata/ Equivalent).

Supply of High Mast Tower (25 mtr. height) suitable for 12 set of 200 W LED flood light fittings (Design standard I.L.E. technical support no. 7:2000, material equivalent to BSEN10025, hot deep galvanization to IS: 4759) (Make: Utkarsh / Bajaj) with power feeder box (outdoor type) including motor timer & all electrical and electronics materials, interconnection suitable for power feeder and operation of 25 mtr. High Mast Tower and 12 set of 200 W LED light (Make: Crompton / Greaves)

Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 3C X 6 sqmm Al.XLPE cable (Make: Havells)

Cable 1100V grade multistrand armoured cable as per IS: 7098 (Part 1) / 1988 along with cable gland double compression type and cable lug (Aluminium) as per site requirement – 4C X 10 sqmm Al.XLPE cable (Make: Havells)

Earthing material – 8 SWG GI wire

4MP IP Camera - 1/3# CMOS , H265 & H264

4K IP Fixed Bullet Camera - 1.8" 8MP

4K IP Motorized Bullet Camera

2MP 30x Starlight IR PTZ Network Camera

64 Ch NVR - Intel Processor

64 Ch NVR FOR DISPLAY IN GOURD ROOM

Surveillance Hard Disk 8TB

LED TV FHD 49

LED TV FHD 42

4 Port Giga POE with 2 Uplink GigaLan

8 Port Giga POE with 2 Uplink SFP port

Armourd CAT 6 Cable

1KVA Online UPS With 9Ah Battery

IP 67 Enclosure Outdoor Box

Server Rack With Accessorise

Armoured 3 core cable 1.5 SQmm

HDPE Pipe 32mm

Fabricated GI Pole - CCTV

Chemical Earthing Pit 50mm 2Mt.

Ethernet LAN Surge Protector RJ-45

Supply of Air Compressor 3HP

Supply of Car Washer

Supply of PVC Overhead Tank

Supply of Water Pump and related plumbing for supply of water to overhead tank from Underground Tank

Providing services of Borewell Drilling and Supply of Pump for Borewell.

pH Meter: (Like Toshniwal / Sisco or other reputed make)

Water Bath: (reputed make)

Hotplate: (reputed make)

Flash Point Apparatus: (Abel)

Lab Stirrer: (reputed make)

Constant RPM Stirrer with following attachments (reputed make)

The Procurement, Manufacturing, Testing & Supply of Pit Less Type Electronic Weighbridge 60T Capacity, as per technical specification given in Brief Scope of Work

Supply and Commissioning of Diesel Forklift Truck 3000 Kg Capacity as per detail specification given in Brief Scope of Work

PART - B (INSTALLATION & COMMISSIONING)

Installation & Commissioning of SS Hold Tank for Storage of AN/CN Melt of 103 KL capacity, MOC: SS-304 L (Bottom 8 mm, Shell 6 mm and Top 5 mm thick), size - 4500 mm dia X 6750 mm height, tank will be vertical, cylindrical flat bottom & conical self-supported roof with proper sand leveling, grouting along with Electrical Work and Piping Work with necessary fittings, accessories. The specifications and requirement of the Hold Tank and accessories will be as per the details mentioned in "Brief Scope of Work".

I&C of Electrical work – Laying of cable and electrical fixtures

I&C of SS piping of 2" dia long with necessary bends and fittings for Process Piping with heat tracing and insulation

I&C of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose

I&C of SS304 Flanges 50 NB size for Process Piping

I&C of SS304 Valves 50 NB Size for Process Piping

I&C of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks

I&C of 50NB valves for Steam Piping

I&C CON. Reducer 50 x 40 NB, SS‐304L, #150

I&C of float type 25 NB Steam Traps

Installation of 80 KL Storage Tank for Oxidizer Phase (OP) of 4500 mm Dia X 5000 mm Straight Height. Material of Construction - SS304, Plate thickness - Shell 6 mm, top cover 5 mm and bottom plate 8 mm. Vertical, cylindrical, flat bottom, conical flanged top with supports welded with 75X75 X8 mm Angle Ring, The tank will be complete with 125 Mtrs, 40 NB SCH 40spiral SS304 coil, in two parts for necessary steam heating. It will also be completed with all necessary nozzle, drain, vent, support lugs, heat exchangers, insulated, liquid level transmitter having LCD display and suitable MS Ladder with railing at the top and Sampling Point having an arrangement of two valves for drawl of one liter of sample.

I&C of Electrical work – Laying of cable and electrical fixtures

I&C of SS piping of 2" dia long with necessary bends and fittings for Process Piping with heat tracing and insulation

I&C of Quick Release Coupling set (male and female) for 50 mm ID suitable for SS piping & Flexible Chemical Hose

I&C of SS304 Flanges 50 NB size for Process Piping

I&C of SS304 Valves 50 NB Size for Process Piping

I&C of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from one point to Hold Tanks

I&C of 50NB valves for Steam Piping

I&C CON. Reducer 50 x 40 NB, SS‐304L, #150

I&C of float type 25 NB Steam Traps

Installation & Commissioning of 24 KL Storage & Blending Tank for Oxidizer Phase (OP) of ID of Tank: 3580mm, Tank wall thickness 6mm plus 50mm space for insulation material all around the tank, thus total OD of tank shall be approx. 3692mm X Height of Tank wall: 2600mm, plus channel support of 200mm at the tank base & top, thus total height of tank from floor level shall be 3000mm Straight Height. Tank Material of Construction - SS304, Plate thickness - Shell 6 mm, Flanged Flat Top 4 mm, Flat Bottom 8 mm with MS Channel Support, the blend tank will be vertical, cylindrical, flat bottom, flat flanged top, complete with 90 m, 40 NB SCH 40 spiral SS304 coil in two parts, 90 mm Dia shaft along with 02 numbers of pitch blade top entry turbine agitator at different depth, 65-70 RPM with supports, all necessary nozzle, drain, vent, support lugs and MS platform with railing and suitable ladder and 20 HP, IP 55, TEFC motor with suitable Electrical Power Switch, Gear Box along with insulation of tank by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG. Height of manhole collar to be max 200 mm so that it is within the height of channel support at the top of tank and it does not interfere during placement of tank. Manhole size required minimum 600 mm ID at the top of tank for feeding of AN & cleaning of Tank. Providing feed hopper to be fitted on manhole having square shape (approx. 1m x1m) at top and with bottom dia equivalent to manhole dia with fixing arrangement with nut & bolts of SS is required for all tanks.

Installation & Commissioning of SS304 Flanges 50NB for above Process Piping

Installation & Commissioning of SS304 Valves 50 NB Size for above Process Piping

Installation & Commissioning of Electrical work – Laying of cable - approx. 3Ø power supply to electrical fixtures attached to Blend Tanks, Pumps and Boilers

Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent

Installation & Commissioning of Insulated Steam Transfer Piping of 40NB MS pipe with flanges and pipe fittings form supply line to the proposed Blend tanks

Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS IBR seamless pipe with flanges and pipe fittings for recovery of condensates

Installation & Commissioning of 40NB valves for Steam Piping

Installation & Commissioning of 25NB valves for Steam Piping

Installation & Commissioning of float type 25 NB Steam Traps

Installation & Commissioning of Storage Tank (MOC-MS) of 40 KL capacity with additional provision for 5% air space , MOC-IS 2062, Size-3600 mm dia X 4000 St. Ht. . The tank will be vertical, cylindrical, flat bottom and conical top to be fabricated from IS 2062 quality plates. Shell & Top will be from 6 mm thk plates and bottom will be 8 mm thick. Complete with Steam Heating Coil of approx. 80 mtrs. of 25 NB SCH 10 MS Pipe Coil. The tank will be completed with necessary drain, vent etc. The Tank will be insulated by 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG along with suitable Ladder & Railing with MS structure with anticorrosive paint along with Walkway over the tanks by gratings/chequered Plate. Walkway of both tanks will be interconnected. 2 Nos. Lightning arrester with 2 Nos. Earth pit and suitable foundation. I&C of MOTOR STARTER PANEL/BOX and cable laying underground including excavation, sand cushioning, protective covering and refilling the trench or on cable tray as per side condition including end termination with necessary glands and lugs for the items mentioned in Part-A Item No. 140 and 141.

Installation & Commissioning of oil pipe - 80 NB Dia, MS pipe along with necessary valves and fitting and strainers for unloading of Furnace oil tankers along with necessary supports, hooks and grouting etc

Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump

Installation & Commissioning of oil pipe- 2" Dia, MS along with 04 Nos. valves and fitting with heat tracing and insulation along with necessary supports, hooks and grouting etc

Installation & Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings along with necessary supports, hooks and grouting etc

Installation & Commissioning of 50NB valves for Steam Piping

Installation & Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for condensate along with necessary supports, hooks and grouting and underground laying etc

Installation & Commissioning of 25NB valves for Steam Piping

Installation & Commissioning of float type 25 NB Steam Traps

Installation & Commissioning of Fuel Phase (FP) Blend Tank, 2.5 KL capacity, 1350 mm Dia X 1800 mm height, Material of Construction - IS 2062, Plate thickness - Shell and top 5 mm, Bottom dish 6 mm, the blend tank will be vertical, cylindrical, dished bottom, flat flanged top, complete with 20 m, 25 NB SCH 40 spiral coil, 50 mm Dia shaft along with pitch blade turbine agitator, with all necessary nozzle drain, vent, support legs & ladder and 2 HP TEFC, IP 55 motor and Suitable Gear Box for driving turbine agitator and load cell with least count of 1 kg and max net weight carrying capacity of 3000 kg. Installation & Commissioning of Temperature controller with suitable arrangement to maintain temperature of fuel phase in the range of 40-60° C.

Installation & Commissioning of Basket Strainer for Oxidiser Phase , 75 Ltrs capacity, Make of Construction - Vessel SS 304 and Jacket IS 2062, Vessel Shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dished bottom, flat flanged top jacketed vessel complete with perforated strainer with 18 mesh SS filter cloth, inlet/outlet nozzle, drain etc.

Installation & Commissioning of Basket strainer for Fuel Phase - 50 Ltrs capacity, material of construction SS 304, plate thickness - vessel shell 5 mm, bottom dish 6 mm, top plate 6 mm, jacket shell 5 mm, dish 6 mm, the strainer will be vertical, cylindrical, dish bottom, flat flanged top, jacketed vessel complete with perforated strainer with 18mesh SS filter cloth, inlet/outlet nozzle, drain etc.

Installation & Commissioning of Screw Pump, RMAB 601 of make Roto Pumps Ltd or any other suitable better make for transferring Oxidizer Phase to Blender and 7.5 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump

Installation & Commissioning of Screw Pump, RDAA 492 of make Roto Pumps Ltd or any other suitable better make / Gear Pump for transferring Fuel Phase to Blender and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate along with suitable foundation for the pump

Installation & Commissioning of Emulsion Blender of 150 Kg/min capacity, 208 mm O/D X 458 mm Long, Material of Construction - Body of Aluminium 8 mm, Rod 9.5 mm, Rotating shaft SS 410, 28.5 mm Dia, Blades SS 410, 5 mm thick, Blender will be Horizontal cylindrical complete with series of pin and rotating shaft complete with shear blades, end bearing with seals and 25 HP TEFC, IP 55 motor with suitable Gear Box and Coupling base plate

Installation & Commissioning of Control Panel comprising of variable frequency drive (VFD) panel consisting of Danfoss or equivalent make frequency converter suitable for three phase 415 Volts motor of following capacity a) 7.5 HP , b) 2.0 HP, c) 25 HP, d) 7.5 HP along with RPM indicators

Installation & Commissioning of Inline Magnetic Flow Meter / Mass Flow Meter for OB SS 304, range 60 - 150 LPM of IE or equivalent make.

Installation & Commissioning of Inline Magnetic Flow Meter / Mass Flow Meter for FP SS 304 range 5 - 20 LPM of IE or equivalent make

Installation & Commissioning of Screw Pump- WMAA 602 of Roto Pumps Ltd or any other suitable better make for transfer of Emulsion Matrix from Product Pump to Silo and 7.5 HP TEFC, IP 55 motor with suitable gear box and coupling and base plate along with suitable foundation for the pump

Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase unloading and transfer line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Installation & Commissioning of Furnace Oil / HSD unloading and transfer line with Suction line of 50 NB & Delivery line of 40 NB, SCH 10, Material of construction MS as per site requirement along with necessary supports, hooks and grouting etc

Installation & Commissioning of Oxidizer Phase -filter - Screw Pump - flow meter line with suction line 65 NB & delivery line of 50 NB, SCH 10, Material of construction SS 304 as per site requirement along with necessary supports, hooks and grouting etc

Installation & Commissioning of flexible Chemical Hose for Oxidizer Phase - Flow Meter - Blender line - 50 mm ID, IS:7654 Type1 with quick release end fittings of BJ or any other suitable better make

Installation & Commissioning of fuel Phase (FP) - filter - Pump - flow meter line with suction line 50 NB & delivery line 25 NB, MOC SS 304 along with necessary supports, hooks and grouting etc

Installation & Commissioning of Fuel Phase - Flow Meter - Blender - 1.0 inch flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ or any other suitable better make along with necessary supports, hooks and grouting etc

Installation & Commissioning of Emulsion Matrix transfer line from Blender to Silo - 65 NB SCH 10 SS 304 along with necessary supports, hooks and grouting etc

Installation & Commissioning of Quick Release Coupling set (male and female) for fixing 50 mm ID transfer hoses with Blend tank outlet - of BJ Corporation Make or equivalent

Installation & Commissioning of SS 304 Three Way Ball Valve 65 mm between Emulsion Matrix Transfer Line from Blender to Silo

Installation & Commissioning of gear pump of capacity 300 LPM with flame proof motor with suction and discharge port of 2" along with base frame and suitable foundation for the pump

Installation & Commissioning of Silo for Storage of Emulsion Matrix of 24 KL (30T) capacity, MOC-IS 2062, Size-3000 mm dia X 3000 mm height X 750 mm conical height, Silo will be vertical, cylindrical, conical bottom and top complete with all necessary nozzle, vent, support bracket, with suitable platform with ladder to access the various inlets/outlets at the top of the silo along with insulation of 50 mm thick glass wool pad, chicken mesh and cladding with Aluminium Sheet of 22 SWG and concrete foundation

Installation & Commissioning of Digital Load Cells (Mettler Toledo make) for Silo

Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Installation & Commissioning of 2.5 inch ID flexible hose of Gates make or equivalent with both ends fitted with quick coupler of BJ make

Installation & Commissioning of Emulsion Matrix transfer line from Hopper of Screw pump to Pump Trucks and Emulsion Tanker to Silo - 65 NB SCH 10 SS 304.

Installation & Commissioning of SS 304 Flanges for above Process Piping

Installation & Commissioning of SS 304 Valves for above Process Piping

Installation & Commissioning of Quick Release Coupling set (male and female) for 50 mm ID flexible chemical hose - of BJ Corporation Make or equivalent along with suitable 1 no. Dust Cap

Installation & Commissioning of Control Panel along with Safety Device Units (High Pressure, Low Pressure switches, High Temperature Cut-off switch & pressure gauge, Rupture disc) for Emulsion Transfer Pump

Installation & Commissioning of Rotary Gear Pump with Impeller Nitrile Rubber with Electric Motor and Suitable Gear Box Make: NAPCO or equivalent Capacity :3’’ -400 LPM, Discharge :10 Bar

Installation & Commissioning of Single Roll Crusher of capacity 15-16 MT/Hr for crushing High Density Ammonium Nitrate Lumps (bag size) 750 mm x 500 mm x 250 mm with opening of the Crusher 900 mm (approx) x 550 mm (approx) and output size 40 mm approx along with suitable drive and motor and starting panel and supply cable and necessary safety features including providing of suitable civil & structural foundation and suitable placement of tail end of the Conveyor and support system along with charge hopper above the Crusher Opening and platform for keeping pallets of HDAN and space for manual charging of bags in to Crusher as per the details mentioned in brief scope of work.

Installation & Commissioning of High Density Ammonium Nitrate conveying system through a Belt Conveyor of width 800-1000 mm & CD of approx 35-40 m along with skirting arrangement on both edges of the Conveyor and suitable drive, motor, starting panel and supply cable and necessary safety features along with 4 nos. discharge points / ploughs for feeding 4 nos. Blend Tanks falling in the discharge zone of around 25m. (The tanks are of dia 3692 mm-OD with a centre to centre gap of 5000 mm between the Tanks) with total lift requirement of around 3m from tail end to discharge zone including providing of suitable Civil & Structural foundation for supporting the Conveyor System along with side walk ways as per the details mentioned in brief scope of work.

Installation and Commissioning of FO Fired Boiler Unit RXD-850 (850 kg/hr) working pressure of 10.54 kg/cm2 with Economizer of Thermax make only along with necessary electrical items supply and installation

Installation and Commissioning of Softner EZ30 of Thermax make only

Installation and Commissioning of Filter EZ40 FDM of Thermax make only

Installation and Commissioning of Oxidation Chamber- E Z200C of Thermax make only

Installation and Commissioning of Mild Steel Chimney (self supported) of 300 mm top diameter and 18 Mtrs height (approx) along with flue gas duct with supporting structure, sampling collection point, platform for collection & spiral ladder up to collection point and ladder from collection point to top - to cater 2 nos of 850 Kg/Hr Boilers including appropriate civil foundation for the Chimney to withstand the load and necessary supports including duct piping from Boilers to Chimney, Lightning arrester and light indicator over Chimney with 2 Nos. Earth pit and suitable foundation

Installation and Commissioning of Pressure reducing station, Range- In let pressure 10.54 kg/cm2, Out let pressure 3.5 kg/cm2 Max, Steam flow-Max. 3000 kg/hr, Body-C.S, Inlet size-80mm, outlet-100mm with cast steel valve PRV size 50mm Flange Class ASA 150 as per site requirement along with necessary supports, hooks & grouting etc

Installation and Commissioning of MS Day Tank for FO - 3 KL capacity (round tank with 5 mm plate) with level indicator, 2 nos of 6KW heaters along with temp. controller and cut off switch, necessary electrical supply & connection along with MS piping from Day Tank to Boilers along with necessary MS overhead platform with foundation of suitable size and height with ladder as necessary for housing of FO tank as per site requirement

Installation and Commissioning of 4 nos of HDPE Day Tanks for Soft Water of 3 KL capacity each, along with MS piping from Day Tank to Boilers along with necessary MS overhead platform with foundation of suitable size and height with ladder as necessary for housing of HDPE tank as per site requirement

Installation and Commissioning of Insulated Steam Header Piping 6" MS IBR seamless pipe thickness 8mm with air vent, pressure relief, safety valve, pressure gauge and draining of steam condensate through steam trap, 2 nos outlet for 2 nos PRS with provision of suitable length with flanges and pipe fittings along with NRV 4 nos in between Boiler output and steam header with necessary bend and fittings for catering steam output from 4 nos Boilers 850 kg/hr each and 3 nos more points for future expansion in same header (with a provision for up gradation to 6000 Kg/Hr)

Installation and Commissioning of Steam Transfer Piping of 50 NB MS IBR seamless pipe with insulation and with necessary flanges and pipe fittings from Boiler outlet/steam header to PRS to Blend Tanks along with necessary supports, hooks and grouting overhead/underground laying etc

Installation and Commissioning of Insulated Steam Transfer Piping of 80NB MS pipe with flanges and pipe fittings for recovery of condensate from Blend tanks to condensate recovery tank along with necessary supports, hooks and grouting overhead/underground laying etc

Installation and Commissioning of Insulated Steam Transfer Piping of 25NB MS pipe with flanges and pipe fittings for steam supply / condensate collection along with necessary supports, hooks and grouting overhead/underground laying etc

Installation and Commissioning of 50NB valves for Steam Piping

Installation and Commissioning of 25NB valves for Steam Piping

Installation and Commissioning of float type 25 NB Steam Traps

Installation and Commissioning of water line - 2" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc

Installation and Commissioning of water line - 1" Dia, GI, class B along with necessary valves and fittings as per site requirement along with necessary supports, hooks and grouting overhead/underground laying etc

Installation and Commissioning of Furnace Oil - 1.5 " Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground

Installation and Commissioning of Furnace Oil - 1" Dia, MS along with necessary valves, and fitting with heat tracing and insulation along with necessary support post and structure to run overhead/arrangement to run underground

Installation and Commissioning of Monoblock Pump 2HP, Connection Size 2" for delivery up to height approx 40 feet - reputed make like Kirloskar/KSB or equivalent

Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through “A” or “B” class Electrical competency holder or from concerned authority as applicable, from concerned authorities (if applicable) (applicable statutory fees shall be payable by IOCL) and Installation & Commissioning of items mentioned at Sl. No. 1.195 of Part-A with necessary support base and structures etc

Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm. Sl. No. 1.196

Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm. Sl. No. 1.197 & 1.198

Installation, Testing & commissioning of Diesel operated Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. a) Fire Pump of capacity 2280 LPM – (137 M3/Hr) (Make-Kirloskar/KSB/Greaves)

Installation, Testing & commissioning of Pump set complete in all respect i.e. comprising pump, motor of 1450 rpm, Pin Bush type coupling, coupling guard, common base frame, cushy foot mounting, and foundation. b) Jockey Pump of Capacity 180 LPM. (Make-Kirloskar/KSB/Greaves)

Installation & Commissioning of Pressure Switch with guide valve and pressure damper including necessary fitting.

Installation & Commissioning of Combined Starting Panel for above four nos. pump set, with Star-Delta type starter for Fire Pump & D.O.L. type starter for Jockey Pump.

Installation & Commissioning of Pressure Gauge (100mm dia & 0 to 15 Kg / Sq.cm) with Guide Valve and pressure damper including necessary fittings.

Installation & Commissioning of single headed oblique type Hydrant Valve (Alloy Steel) as per IS: 5290 with PVC blank cap.

Installation & Commissioning of 63mm X 15 Mtr. long Hose as per IS: 8423, bounded with pair of Steel Coupling as per IS: 903.

Installation & Commissioning of front glassed single door powder coated M.S. Hose Box (16 X 18 SWG) of standard design to accommodate one Branch Pipe with nozzle and 2 lengths of 63mm X 15 Mtr. long Hose.

Installation & Commissioning of C.I. Flanged Gate Valve as per IS: 14846, PN 1.6 of 100mm NB

Installation & Commissioning of C.I. Flanged Non Return Valve as per IS: 5312, PN 1.6 of 100mm NB

Installation & Commissioning of aboveground/underground M.S. piping conforming to IS: 1239 / 3589 with fitting, support, clamp and treatment on outer surface by one coat of primer & two coats of synthetic enamel red paint for 100mm NB,M.S., Medium(Schedule 40)

Installation & Commissioning of Mono Block Pump including base frame and protection shed, GI Pipe, Earth Pit etc.

Construction of Shed consisting Iron Channel fitted Iron profile sheet Size: 4 Mtr X 2.5 Mtr. including RCC Foundation of Pump Base

I&C of 300 Ltr. SS Kettle with agitator with 2 Way Ball Valve 40 NB- 2Nos, 2 Way Ball Valve 25 NB- 2Nos

I&C of Screw Pump, RDAA 492 of make Roto Pumps Ltd or suitable Centrifugal Pump for transferring kettel to tank and 2.0 HP TEFC, IP 55 motor with suitable Gear Box and Coupling and base plate.

I&C of 25 NB pipe, MOC SS 304 necessary nozzel, bend , valve etc

I&C of HDPE Day Tanks of 3 KL capacity

Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 1.220 to 1.236 of Part-A (BoQ1) with necessary support base and structures etc

Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" class Electrical competency holder, from concerned authorities (applicable statutory fees shall be payable by IOCL)Installation & Commissioning of items mentioned at Sl. No. 1.237 of Part-A (BoQ1) with necessary support base and structures etc

Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 35 sq. mm

Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Above 35 sq. mm and upto 185 sq. mm

Laying and connection of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required including end termination with necessary glands and lugs on cable tray / in the existing masonry open duct / on wall surface as required. a) Upto 185 sq. mm

Installation & Commissioning of items mentioned at Sl. No. 1.258 to 1.263 of Part-A (BoQ1) and Testing & Commissioning of Earth Pit complete in all respects like earthing plate, GI pipe, Aluminium Strip, charcoal & Salt etc and laying & connections of earth flat/GI wire and lightning protection and fixing of lighting poles and connections testing etc.

Installation & Commissioning of items mentioned at Sl. No. 1.264 to 1.277 and 1.280 of Part-A (BoQ1) all wiring for light & sockets including necessary civil modification and grouting etc.

Installation & Commissioning of items mentioned at Sl. No. 1.278 and 1.279 of Part-A (BoQ1) MS cable tray including necessary civil foundation, grouting and welding with Iron angle supports.

Erection, Testing & Commissioning of Outdoor, Silent Type 250 KVA Diesel Generating Set as per technical specification of OEM or manufacturer of DG Set along with AMF and exhaust gas piping with necessary fittings and accessories as required and installation of suitable cable (approx 40 mtrs.) for connecting incoming supply from DG Set with AMF and MCC panel including arrangement of load testing (Diesel required for load testing will be supplied by IOCL)

Civil works for construction of base platform for housing the DG Set outdoor nearby the main MCC panel room

Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) and Installation & Commissioning of items mentioned at sl. no. 1.286 to 1.289 of Part-A (BoQ1) along with lying of cables by making suitable trenches/through piping at road crossing/ critical areas for underground cable laying and cable connections with necessary glands and lugs and end connections to synchronize the DG supply with MCC panel and making of earth pits (4 nos. as mentioned in BoQ1) complete in all respects like earthing plate, GI pipe, GI Strip, charcoal & salt etc including earth pit resistance testing & certification and lying & connections of earth flat/GI wire etc.

Preparation, Approval of necessary drawings / layout plans & liaison for obtaining statutory permissions, through "A" or "B" class Electrical competency holder as applicable, from concerned authorities (applicable statutory fees shall be payable by IOCL) Installation & Commissioning of items mentioned at Sl. No. 1.290 to 1.293 of Part-A (BoQ1) along with construction of civil foundation & grouting for High Mast Tower.

I&C of all CCTV items i.e. Sl. No. 1.294 to 1.313

I&C of misc items mentioned in Sl. No. 1.314 to 1.318

I&C of all Lab Equipments mentioned in Sl. No. 1.319 to 1.324

Installation & Commissioning and Stamping Charges of Pit Less Type Electronic Weighbridge 60T Capacity, as per technical specification given in Brief Scope of Work

Construction of Civil Foundation and Ramp for 60 MT Weigh Bridge

Bidder Name

Amount in Words

GMP Systech Engineering Pvt.Ltd.

S S FABRICATORS

SMS LIMITED

SMS LIMITED

GMP Systech Engineering Pvt.Ltd.