SC reserved work Revival of Papaipeta L I Scheme on Munneru river in chennaraopeta mandal of warangal district

Clearing thin jungle growth ( more than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete.

Excavation and removal of silt or silt mixed with sand in slussy condition from canal bed including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., complete with initial lead upto 50 m and all lifts.

MS Cheqeured plates of 10 mm thick for covering gaps between Girder on Sump well

Supply,delivery and erection of 175x90x5.5" mm of Girders for a length of 1.20Mtrs for supporting vertical girders

Supply,delivery and erection of 175x90x5.5" mm of Girders for a length of 3.00 Mtrs (Vertical-2 No's and Horizantal-1 No.)

Supply,delivery and erection of 200x100x5.7" mm of Girders for a length of 5.10 Mtrs for supporting girders for fixing 3T chain pully block.

Manufacturing, supply, erection and testing of M.S.Pipes and pipe specials as required including M.S.Sheet for pipes, M.S.Plate for flanges as per ISI, cutting bending, rolling,welding fabrication including transportation to site laying in position aligning, jointing, welding if necessary at site including cost of jointing materials like bolts and nuts rubber packing, painting with one coat of red oxide and 2 coats of anti corisive bitumen paint both inside and out side including cost and conveyance of all materials, labour charges etc. complete.

C.C. grade M15 (1:2.5:5) corresponding IS 456 using weigh batcher/ mixer with 40mm size graded machine crushed hard granite metal from approved quarry including cost & conveyance of all materials.

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Cost of Machine End pair (Socket +Spigot) with 100mm length MS Barrel on each side of Socket and Spigot for providing M.S Specials on PSC pipelines excluding cost of M.S Specials & Taxes but including cost of conveyance to site etc., complete. 400 mm dia Machine end pairs

Supply & delivery of Indef make pulley block 3 ton capacity heavy duty with travelling trolley including gantry arrangements.

Excavation in all kinds of soil including boulders upto 0.30 m dia. for foundations of canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with initial lead upto 50 m and initial lift upto 3 m.

Chiseling the stone masonry wall and repairs as directed by the department arresting the leakages for one joint in pressure main.

CM(1:1) 20 mm thick on rough surface after chiseling of pipe at joint for arranging the MS mesh around the pipe

Wire mesh 20 gauge over the CM(1:1) 20 mm including cost and conveyance of all materials, labour charges etc., complete for finished item of work

Supply and delivery of lead wool best quality excluding all taxes.

Hard cate water per litre

Charges for expert joint

Providing homogeneous embankment using soil from approved borrow area in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transportation, spreading soil in layer of specified thickness, breaking clods, sectioning,etc.,complete with initial lead upto 1 km and all lifts.

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Cement Concrete in (1:4:8) proportion using 40mm size hard granite machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, dewatering , all leads and lifts and labour charges for machine mixing, laying, ramming, curing etc. complete

C.C. grade M15 (1:2.5:5) corresponding IS 456 using weigh batcher/ mixer with 40mm size graded machine crushed hard granite metal from approved quarry including cost & conveyance of all materials.

Providing and laying of 600 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. Tech Specification Clause 1106 MORD.

Supply of brand new Submersible Pumps & Motors of 20 HP to operate on 3 phase 415 V electrical supply, capable of discharging 1.964 cusecs / 55.60 LPS at a total head of 51.31 ft./ 15.64 mt due to all causes as per specifications furnished in the tender schedule. The pump should be Provided with stainless steel impellers and all required accessories etc Complete for fixing of the pumpset to the existing pipe line are to be provided with new VSS/HSS squirrel cage induction motors of TEWC type for 415V, 3-phase, AC power supply, 1500RPM, 15KW/20HP as per specifications. the Submersible cable for the pumpset shall be provided along with it for 20 mtrs length of required specifications as per manufactures design along with CPRI certification of pumpset and cables.

Dismantling of 20HP Horizontal Centrifugal Pumpsets and 3 Phase Induction Motors (Old Pumps)

Supply of 35 Sqmm 3.5 Core.XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098

Supply of 70 Sqmm 3.5 Core.XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 from over head line to Panel Board Size: 3.5 core 70 sqmm No. of runs: Two runs

Supply of PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper onductor HeavyDuty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990including all transportation charges etc complete. 10 sq.mm single core

Supply and transportation of LED Driver with input line voltage 120V-270V AC, 50Hz with surge protection of 4.0 KV, IP20, suitable for LED street light fitting.

Supply of Protection as per IS:13032 and suitable for S.P out goings and for 1 No Incommer etc complete.Makes : Legrand / Schneider /Siemens / L&T / Cabtree Xpro / ABB /C&S

Supply and fixing of spare kit for Contactors of L & T make type -MNX-A2 54NO and 62NC

Supply and Fixing of Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 125A 3 Pole MCCB, 25kA with thermal magnetic release Panel Mounted.

Testing and commissioning of Control Panel Board

Repairs & Overhauling of Sluice Valves - 2 No's. & Non Return Valves -2 No's. of 250 mm Dia including cost of all labour charges,nuts bolts, packing sheet etc., for finished item of work.

Manufacturing, supply, erection and testing of M.S.Pipes and pipe specials as required including M.S.Sheet for pipes, M.S.Plate for flanges as per ISI, cutting bending, rolling,welding fabrication including transportation to site laying in position aligning, jointing, welding if necessary at site including cost of jointing materials like bolts and nuts rubber packing, painting with one coat of red oxide and 2 coats of anti corisive bitumen paint both inside and out side including cost and conveyance of all materials, labour charges etc. complete. 250mm dia M.S.Pipe Long pipe for delivery- 1 mtrs length 2 no.s 3.143*0.258*0.008*7850*1*2.00