DEFPROC

Active

Works

Civil Works

REPAIR TO JOINERY AND HANGERS DOOR AND

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE (AF)Yelahanka | Bengaluru Urban, Karnataka

Amount: ₹48 LCloses: 14 Oct 2026

Timeline

Published23 Sept 2026
Submission Opens7 Oct 2026
Closes14 Oct 2026
Bid Opening21 Oct 2026

Tender Value

₹48 L

EMD Value

₹96,000

Closing Date

14 Oct 2026, 6:00 pm

Tender Inviting Organisation

Name

GE (AF) Yelahanka

Address

GE (AF) Yelahanka Bangalore - 63

Work Description

REPAIR TO JOINERY AND HANGERS DOOR AND REPAIRS TO ROOF SHEET, ROOF TREATMENT AND ALLIED WORK SERVICES IN CERTAIN BUILDINGS IN TECHNICAL AREA AT AFS YELAHANKA

Tender Information

Tender ID

2026_MES_790669_1

Reference Number

8570/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

120 days

Location

GE (AF)Yelahanka

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application on firm letter head. (.pdf)

RequiredScanned copy of DD for Rs. 500/- as tender fee in favour of GE (AF) Yelahanka (.pdf)

RequiredScanned copy of MES enlistment letter for MES Contractor (.pdf)

RequiredScanned copy of all documents as per NIT for enlisted and unenlisted contractors. (.pdf)

RequiredScanned copy of Employees Provident Fund Code Number and PAN number. (.pdf)

RequiredScanned copy of GST registration certificate/Code Number (.pdf)

RequiredScanned copy of work in hand details if applying class below the required class. (.pdf)

Finance

RequiredBOQ (.xls)

RequiredTender Documents (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE (AF) Yelahanka

EMD Fee Amount

₹96,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

21 Oct 2026

Download Starts

23 Sept 2026

Download Ends

14 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (61 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking down Chowkats or frames n exceeding 1.5 Sqm each (Without taking off shutters from the frame) of any description complete all as specified.	20	Each	-	-
2	Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm (without taking off shutters from the frame) of any description complete all as specified.	20	Each	-	-
3	Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified.	14	Per Leaf	-	-
4	S&F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.	25	RM	-	-
5	M&L for Plain Cement Concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) filling in chowkats all as specified and directed.	0.16	Cum	-	-
6	S&F 35 mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides all as specified and directed.	28	Sqm	-	-
7	M&L 35 mm thick wire gauzed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc. sizes of members of shutters as specified in fitted to chowkats all as specified and directed.	3	Sqm	-	-
8	S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixed in opening as per specification and drawing including making good to hold fast, Complete all as specified and as directed.	20	Rm	-	-
9	S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, Complete all as specified and as directed.	12	Sqm	-	-
10	S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ aneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.	60	Kg	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.13 MB

Work Item Documents

Binder1.pdf

Tender Documents • 2.69 MB

BOQ_886377.xls

BOQ • 0.34 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking down Chowkats or frames n exceeding 1.5 Sqm each (Without taking off shutters from the frame) of any description complete all as specified.

Each

Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm (without taking off shutters from the frame) of any description complete all as specified.

Each

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified.

Per Leaf

S&F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.

M&L for Plain Cement Concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) filling in chowkats all as specified and directed.

0.16

Cum

S&F 35 mm thick Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides all as specified and directed.

Sqm

M&L 35 mm thick wire gauzed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc. sizes of members of shutters as specified in fitted to chowkats all as specified and directed.

Sqm

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixed in opening as per specification and drawing including making good to hold fast, Complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, Complete all as specified and as directed.

Sqm

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ aneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.