REPAIR/REPLACEMENT/IMPROVEMENT OF WOODEN/ ALUMINIUM/ STEEL CUPBOARD, PVC DOOR, GLASS PANES, WIRE MESH AND CONNECTED ITEMS IN ALL MD ACCN UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

All as per item No 01. before but exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed.

Resecuring or easing & without taking down in the same opening shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S & F tubular steel farmed work as in doors (as in ckowkats) for single door frames of 2.5mm thick size100 x 50mm including necessary fixing lugs, lock strike plate incl locking arrengemet hold fast, complete all as specified and directed. ( tubular steel100x50mm@ 5.33kg/Rm).

S & F tubular steel farmed work as in doors (as in ckowkats) for double door frames of 2.5mm thick size130 x 65 including necessary fixing lugs, lock strike plate incl locking arrengemet, hold fast, etc complete all as specified and directed. (tubular steel130x65mm@ 6.99kg/Rm).

S & F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm minimum thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pit chcomplete all as specified and directed.

S & F ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm minimum thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc., complete all as specified & directed.

S & F Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed..

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, if both face is covered with decorative face veneer with lapping/ frame to match complete all as specified and directed.

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial side on both sideetecomplete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed.

Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes complete all as specified & directed.

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F 150 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed with screw/ welding (Size of hinges in 100 mm) complete all as specified and directed.

S & F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed.

S & F in repair 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed.complete all as specified and directed.

M&L for mild steel barrel tower bolt stove enamelled black with bright bolt and fixed 200mm size . complete all as specified and directed.

M&L for mild steel pressed handle oval type stove enamelled black 150mm size .complete all as specified and directed.

S & F 150mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & as directed.

S & F for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed

Description all as per item No 29.00 above but figured glass,pin head type complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing pogition complete all as specified and directed

S&F Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws but of aluminium anodised (Size of hasp and staple in 125mm) confirming to IS 363 complete all as specified and directed.

Supply and fix forbrass 2 levers mortice lock, vertical type, size 100mm with double keys for each lock complete all as specified and as directed.

S & F 18 mm thick with min density 600 Kg / cum LEAD FREE PVC Cheluka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions including dismantling of existing timber boarding complete all as specified and directed.

S & F stainless steel hydrolic hinge for cupboard / cabnet shutter complete all as specified and directed.

S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified & directed.

S&F 150 mm long brass handles, cast type polished bright complete all as specified and directed.

S&F 75 mm long brass handles, cast type polished bright complete all as specified and directed.

S&F in repairs dropery rod 25mm dia with PVC pipe over MS conduit, side cups including fixing bracket with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

S&F in repairs dropery rod 25mm dia with Stainless steel bright finish pipe both, side cups including fixing with steinless steel bracket with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

M&L for providing oil putty to existing glass pan of steel window complete including preparing surface to interior putty complete all as specified and directed.

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.mild

Supply and fixed in repair300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.mild

Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, including demolition of brick work complete all as specified & directed.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for two coats of OBD over a coat of average 2 mm thick birla putty on newly plastered surfaces complete all as specified and directed.

M&L in repairs for 1.00mm thick mild steel black sheet as in steel door/gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete.

Mild steel farmed work as in doors (as in ckowkats) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 (Gde E-165) including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Abhi Construction

Mahendra Enterprises

m/s shanti consruction co

J P CONTRACTORS AND SUPPLIERS

m/s Agra Builder

milan enterprises