Repair/Renovation work of Sub Division-I and Jiledari Office of Maudaha dam construction division-I, Mahoba at Irrigation colony Bazariya Mahoba.(Lot-04)

Amount

The quantities given here under are tentative. They can vary on either side upto any extant,the contractor shall have no claim on account of changes and shall be paid of the quantities as physically met at site reach of work for complete work. (Rate are excluding GST)

Providing of unskilled labours/Beldar for vacating office, caarying records, T&P etc, and placing in temporary offices properly in direction of Engineer in charge and vice versa for proper completion of work and other manual work (assuming requirement of 3 labourers per room of moderate size and 4 labours for store rooms and 8 labours for establishment halls etc.

Dismantling A.C. sheet roofing including stacking of serviceable materials.

Dismantling cement concrete and brick or granolithic floor, including base concrete and including material within a distance of 60 m.

Demolishing Brickwork in cement/lime mortar manually/By Mechanical means including stacking of recovered servicable material and disposal of unserviceable material within 30 m lead as per direction of Engineer in charge

Dismantling wooden/MS Doors and Windows including chaukhats with holdfasts and including stacking of dismantled materials as directed by the Engineer-in-Charge within a distance of 60 meters

Dismantling Alluminium Gyspum Partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer in charge

Dismantling of WC pan of all sizes including disposal of dismantled materials i/c malba all complete as per direction of Engineer in charge

Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.

Providing and fixing corrugated serrated adjustable or plain wing adjustable ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. all aprooved by /eingineer-in-charge including cost of all labour, material and T&p etc for Proper completion of work.

Supplying and laying one layer of tar felt or any other equivalent aprooved materials over roofs or at any other place including necessary overlap giving a coat of aprooved mosaic paint on the bottom and top of tar felt , spreading necessary quantity of coarse sand and small size bajari as per direction of Engineer-in-chargeincluding supply of all materials, labour and tools and plants etc. required for proper completion of work

Supplying and laying one layer of tar felt or any other equivalent aprooved materials at the junction of walls and roofs or at any other place as per direction of Engineer-in-charge including necessary overlap giving coat of aprooved mosaic paint below the tar felt and including supply of all materials, labour and tools and plants etc. required for proper completion of work

P.C.C. 1:3:6 in Foundation and under floors including all cost of labour material T&P etc. for proper completion of work.

C.C. in 1:2:4 including all cost of labour material T&P etc. for proper completion of work.

Laying R.C.C. 1:1½:3 R.C.C. by mechanical mixing and mechanical vibrating cement consumption of 7.90 bags per cum. Including cost of material labour and T&P etc. all leads and lifts for proper completion of job as per direction of Engineer-in-charge.

12.50mm thick cement plaster (1:4) over brick work minimum thickness not less than 10mm with 1 part cement and 4 parts Coarse sand of Fineness modulus 1.25 asper diection of Engineer in charge including supply of all materials Labour &T&P etc required for proper completion of work

12.50mm thick cement plaster (1:6) over brick work minimum thickness not less than 10mm with 1 part cement and 6 parts Coarse sand of Fineness modulus 1.25 asper diection of Engineer in charge including supply of all materials Labour &T&P etc required for proper completion of work

Repairs to plaster in ratio 1:4 (1 cement and 4 Coarse sand) of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape , raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to dumping ground, all complete as per direction of E/I

Ist Class Brick work in foundation & plinth in 1:6 CM including all material, labour, T&P etc. all complete of work.

2.5 cm thick Damp proof coarse and of cement consisting of cement concrete in 1:1.5:3 (1 part cement, 1.5 parts Coarse sand, 3 parts aprooved 13 mm graded Stone aggregate) and water proofing Material aprooved by Engineer in charge in proportion as specified by manufacturer for proper completion of work

Ist Class Brick work for Super structure in 1:6 CM including all material, labour, T&P etc. all complete of work.

Providing and Laying of 8 to 10 mm thick ivory or light shade vitrified tiles in flooring and skirting laid in 1:3 cement mortar (1 cement, 3 coarse sand) finishing with cement slurry & with pigment grouting & Polishing Complete I/C S/O all material, labour, T&P etc. required for proper completion of work excluding base concrete

supply and fixing 6mm (1/4") China white glazed tiles in flooring or in skirting or dado laid with ratio 1:3 cement and aprooved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper completion work.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including edge moulding , rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) supply of labour, material and T&P etc. for proper completion of work.

Providing and laying flamed finish Granite stone flooring in required design and patterns (colour black, cherry/Ruby red or equivalent approved by E/I), in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and edge moulding etc. all complete as specified and as directed by the Engineer-in-charge.

Providing and laying polished granite stone flooring in required design and patterns (colour black, cherry/Ruby red or equivalent approved by E/I), in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.

Dismantling existing plaster including disposal of refuse within a distance of 60 m.

Providing and applying white cement based putty of average thickness 1 mm of aprooved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothness complete.

applying priming coat with ready mixed red oxide zinc chromate primer of aprooved brand and manufacture on steel galvanised iron/steel works to give uniform coverage including supply of all materials, labour, T&P etc required for proper completion of work

painting with synthetic enamel paint of aprooved brand and manufacture of required colour to give an even shade , one or more coats on old work including supply of all materials, labour and T&P etc required for proper completion of work.

painting with synthetic enamel paint of aprooved brand and manufacture of required colour to give an even shade , Two or more coats on new work over an under coat of suitable shade with ordinary paint of aprooved brand and manufacture including supply of all materials, labour and T&P etc required for proper completion of work.

Scrapping old colour or white washing or distemper etc including supply of all labour, material and T&P etc required for proper completion of work.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface including supply of all materials, Labour, T&P etc required for proper completion of work.

Distempering with 1st quality acrylic distemper (ready mixed) on New Work (Two or more coats) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. For two coats.

Finishing walls with Acrylic Smooth exterior paint of required shade, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including supply of all materials, labour, and T&P for proper completion of work

Providing and fixing powder coated aluminium (50 mm thickness) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) :

Providing and fixing powder coated aluminium (50 mm thickness) work for shutters of doors and windows, ventilators and partitions including providing and fixing hinges/pivots etc extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) :

Approaximate cost of Alluminium fittings for doors and windows with screws including supply of all materials, labours, & T&P etc required for proper completion of work

Providing and fixing alluminium die cast body tubular type universal hydraulic closer (having brand logo with ISI, Is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board with decorative lamination on both sides confirming to IS: 12823 grade I Type II, in panelling fixed in alluminium doors, windows shiutters and partition frames with CP brass/ Stainless steel screws etc complete as per architectural drawing and direction of Engineer in charge including supply of all material, labour, T&P etc required for proper completion of work

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (With stainless steel cover plate minimum 1.25 mm thickness)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction ofEngineer-in-charge complete.( Upto 5mm depth and 5 mm width)

Providing Salwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length including suply of all materials, labour, t&P etc required for proper completion of work

Providing and fixing ISI marked flush door shutters 30mm thick confirming to IS : 2202(part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked steel butt hinges with necessary screws, oxidised iron fittings (150 mm handles-both sides, L-Drop 16 mm dia and 250 mm rod, tower bolts 200 mm, cleat, stopper etc) including suply of all materials, labour, t&P etc required for proper completion of work

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange +B816of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 m+B816m thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointig and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with GI Metal Ceiling Lay in plain Tegular edge Global whitecolor tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Taking out Existing CC interlocking Paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made seperately and stacking of serviceable material within 50 meter lead as per direction of Engineer in charge

Laying old cement concrete interlocking concrete paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per direction of Engineer in charge (Old CC Paver blocks to be supplied by department free of costs)

Providing and Laying of Rubble moulded Zig Zag or any other shape/design Interlocking Concrete Block Pavements having thickness 80mm as per drawings and Technical Specification Clause 1504 laid in required line, level, curvature, color, pattern over and including providing and laying 50 mm thick compacted coarse sand bed, filling the joits with sandincluding supply of all materials, labour, T&P etc required for proper completion of work

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 2nd class teak wood beading 62X19 mm.

Providing and fixing first quality indian type white glazed orrisa pattern ISI marked WC pan size 580mm.(Hindustan, Cera make) with 10 cm. PVC "P" trap of approved make with 10 litre low level flushing cistem (Hindustan, Sanitax, Ashoka make) ISI marked with syphon, brass fitting and GI chian pull RS of CI Brackets 32mm dia GI flus pipe "B" class (2m) with brass unions etc. 32mm dia. PVC bend 32mm dia. PVC socket 15mm dia. overflow pipe with specials and masquito proof cupings of approved minicipal design, 15mm dia. brass stop cock (400 gms) plastic connection (1.5"x1") with brass unions including supply of all materials, labour, T&P etc. required for proper completion of work and painting of cistern and fittings with approved paint, cutting and making good the walls and floors where required with cement sand and grit. The seat and making good the wallas and floors where required with cement sand and grit. The seat and trap shall have to be fixed over minimum 3" thick C.C. in proportion of 12:6:1 including supply of all materials labour. T&P etc. complete.

Providing and fixing white vitreous china pedestal type water closet (European type WC pan ISI marked with white solid plastic seat and lid) of aprooved brand and make, with seat and lid, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device(handle lever), confirming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing flat back 465mm x355mm x265mm. Size lipped fron urinal basin of white glazed earthen ware 1st quality (Hindustan, Neyeer make) ISI marked with 5 litres CI automatic flushing cistern (Hindustan, Sanitax, Ashoka make) ISI marked with necessary fittings, RS or CI bracket standard size 32 mm. dia. GI flush pipe "B" class with brass unions of fittins and GI waste pipe 25mm dia x 0.66 mm. complete including supply of all materials, labour and T&P etc. required for proper completion of the work including painting of cistern and fitting with approved paint, cutting and making good the wall and fittings with approved paint, cutting and making good the wall and floors where required with cement sand and grit.

Providing and fixing 550mmx400mm. Wash hand basin of white glazed earthen ware 1st quality ISI marked(Hindustan, Neycer make) with RS or CI brackets painted white, 15mm CP metal handle(weigth not less than 400 gms.) ISI marked and 32mm. Dia. CP brass chain with check nut 32mm. dia. CP brass waste standard pattern with check nut 32mm dia. CP brass P or S trap and unions compete with PVC connection 0.50 size including supply of all required materials. materails, labour, T&P etc. required for proper completion of work and including cutting and making good the walls and floor with cement coarse sand and grit fitting used should be of superior quality.

Providing and fixing 600mm x 450mm bevelled dege mirror of Atul, Kiron make glass with indian polish 6.50mm. Thick complete with back of 600mm x 450mm x 6mm hard board sheet fixed to wooden cleats with CP brass screws and washers including supply of all materials, labour T&P etc. required for proper completion of the work.

Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour T&P etc. required for proper completion of the work.

Supply and fixing CP brass bib cock heavy quality 15 mm. dia. (400gms.) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work.

Supply and fixing CP brass stop cock heavy quality 15 mm. dia. ISI marked including cutting and threading the pipe, if requiredincluding supply of all materials, labours, T&P etc. required for proper completion of work.

Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing full way brass gate valve 20 mm dia with wheel valve ISI marked heavy quality including supply of all material labour, T&P etc. required for proper completion of the work.

Supply and fixing low density polythene tank sintex or equivalent.

Providing and fixing 20 mm dia PVC ball float valve with brass rod and union complete ISI Marked including supply of all materials, Labour and T&P etc. required for Proper completion of the work

Supply and fixing Nahani Trap Indian make of approved heavy quality complete with CP brass grating, Nahani trap laid over base cement concrete 1:6:12 including supply of all materials, labour, T&P etc. required for proper completion of the work.

P/F 100 mm diasand cast iron socket & spigot soil, waste, drainage and ventilating pipes (lead chaulked joints to be measure & paid seprately) complete in all respect.

P/F 75 mm diasand cast iron socket & spigot soil, waste, drainage and ventilating pipes (lead chaulked joints to be measure & paid seprately) complete in all respect.

Providing and fixing PVC connection pipe 450 mm. x 15 mm. with barss unions including supply of all materials, labour, T&P etc. required for proper completion of work.

Wiring points for light/Ceiling light with 1.5 sq. mm. PVC insulate and P.V.C. sheathed on T.R.S. single core cable Earth continuty on teak wood batten and Modular type switch etc., complete in all respect.

Wiring points for plug with 1.5 sq. mm. PVC insulate and P.V.C. sheathed on T.R.S. single core cable Earth continuty on teak wood batten and Modular switch etc., complete in all respect.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring point for fan / fesh air fan (light duty exhaust fan) with 1 sq.mm. FRLCHLACH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuitywire, modular type switch & ceilingrose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, includingmatchingcolour

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuitywire includingmatchingcolour wash etc., complete in all respect.

Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mmCu Wire

Supply and fixing factory wired H.P.F. box type flourcent tube light complete including tube etc. On surface complete in all respect of Phillips/Bajaj/G.E.C./Crompteon make suitable for 1x40 watt. With flourance tube

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, SPN miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, TPN miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 16 way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 way (4+24) double door, horizontal type Three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

Supply and fixing of 55 Watt indoor rescess mounting LED Square fitting for Armstrong celling having powder coated ie cast alluminium housing body with extended heat sink and diffuser of polycarbonate material and driver set Complete in all respect.

Supply and fixing 200 mm dia ventilator fan in toilet/WC

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply of M.S. Angle iron door, window ventilation frame made of approved M.S. angle iron wroght to required from including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.

Dismantling steel work in built up sections in angles, tees, flats, and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc including dismembering and stacking within 50 meters lead

Mild steel or iron work of Heavy sizes and sections such as Truss, built up gates, doors, frames, record rooms, roof work etc wrought to required form including drilling holes and rivetting, welding, jointing whereever necessary including supply of steel, bolts, nuts, wastage, and including their fixing required for proper completion of work

Painting MS pipes, GI pipes and fittings etc with synthetic enamel white paint with one coat of aprooved quality including supply of all labour material and T&P etc required for proper completion of work

Mild steel or iron work of Plain work such as Reinforced concrete/Brick work (when not included in overall rates), including bending, cutting, binding, making hooks,etc including supply of Mild steel, binding wire, labours materials, T&P etc required for proper completion of work.

dismantling, cleaning/Dusting, Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Providing and fixing brass curtain rods 25 mm dia of wall thickness 1.25 mm with two brassbrackets fixed with brass screws and wooden plugs etc whereever necessary complete

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm dia, (including cutting chases and making good the walls) having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases making good the same including testing of joints cmplete as per direction of Engineer in charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm dia, (including cutting chases and making good the walls) having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases making good the same including testing of joints cmplete as per direction of Engineer in charge

Subhash Chandra Contractor