Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.4 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹19.3 L+₹62,587.30 (3.35%)Rejected-Finance PLOT NO 32 FF SHIVAJI ENCLAVE NEW DELHI 110027 | NEW DELHI | NEW DELHI | DELHI | 110027 | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹21.8 L+₹3.0 L (16.3%)Rejected-Finance | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹22.8 L+₹4.1 L (21.9%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L-4 | Rejected-Finance L-4 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
REPAIR /REPLACEMENT OF CERTAIN MISC B/R AND EM CONNECTED WORKS OF 5 AFLU AT AF STN PALAM AND AOR OF GE (AF) FARIDABAD
2022_MES_563529_2
GE (FBD)/AF-65/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Delhi
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) FARIDABAD
₹40,000
Yes
14 Feb 2023
26 Dec 2022
11 Jan 2023
26 Dec 2022
9 Jan 2023
26 Dec 2022
Amount
Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed by Engr-in-Charge.
M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.
All as per item No 02 above here in but except bricks. complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed by Engr-in-Charge. WPC will be measured and paid separately).
Supply only liquid WPC complete all as specified and directed by Engr-in-Charge
M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engr-in-Charge.
M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over one coat of primer etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed by Engr-in-Charge.
M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl preparation of new plasterd surface complete all as specified and directed by Engr-in-Charge. Note : Colour and make as approved by Engr-in-Charge.
M & L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over one coat of primer etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces by removal of existing treatmen and applying two coats of oil emulsion distemper over a coat of primer on surface of walls through electrical operated grinder etc, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces by removal of existing treatmen and applying one coat of oil emulsion distemper over a coat of primer on surface of walls through electrical operated grinder etc, complete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etccomplete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces by removal of existing treatment and apply one coat of cement based paint over a coat alkali primer resistance etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on ceiling over one coat of primer etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surfaces by removal of existing treatment and applying one coat of distemper oil emulsion on ceiling over one coat of primer etccomplete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces and applying two coats of white washing on wall complete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces and applying one coat of white washing on wall complete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces and applying two coats of white washing on ceiling complete all as specified and directed by Engr-in-Charge.
M & L for preparation of old surfaces and applying one coat of white washing on ceiling complete all as specified and directed by Engr-in-Charge.
M&L cement concrete type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters buttreses columns, pillars, boundry pillars and posts and like for fixing of angle iron on top of boundry wall , including form work complete all as specified and directed by Engr-in-Charge.
M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed by Engr-in-Charge.
ditto all as above but 6 to 8 mm dia and over and including in stirrups, spacers and binders and complete all as specified and directed by Engr-in-Charge.
M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed by Engr-in-Charge.
All as per item No 28 above item but here- in area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed by Engr-in-Charge.
M& L for Glazed ceramic jointless light/coloured group of size 350mmx450mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as specified and directed by Engr-in-Charge. Note : shade & design as approved by EIC/GE complete all as specified and directed by Engr-in-Charge.
M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as specified and directed by Engr-in-Charge.
All as per item No 31 above item but here-in- area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors & dadocomplete all as specified and directed by Engr-in-Charge.
M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white incl roundening the edge of stone complete all as specified and directed by Engr-in-Charge.
M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes incl demolition complete all as specified and directed by Engr-in-Charge.
M & L for 100mm thick PCC 1:2:4 type B-2 (using 40 mm agg. ) in hardstanding /base of flooring incl demolition complete all as specified and directed by Engr-in-Charge.
M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as specified and directed by Engr-in-Charge.
M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area incl demolition complete all as specified and directed by Engr-in-Charge.
M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantlingcomplete all as specified and directed by Engr-in-Charge.
M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment incl 25mm thick sand filling complete all as specified and directed by Engr-in-Charge.
M & L broken stone hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M & L for PCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed by Engr-in-Charge.
M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' in on concrete slab 100mm complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed by Engr-in-Charge.
M&L for aluminium Anodized powder coated fixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specified and directed by Engr-in-Charge.
S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed by Engr-in-Charge.
M&L for 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified and directed by Engr-in-Charge.
M&L in repair for PVC hollow panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall/ Celing incl moulding end caps and fixed with PVC cornices, sleeves and screws as required at site complete all as specified and directed by Engr-in-Charge.
S & F for 10 -12 mm thick glass door, frosted with certain logo, fixed with floor spring, fixed on floor with two nos stainless steel handle of 300mm on each leaf and fixed partition arrangement incl necessary provision to lock the door complete all as specified and directed by Engr-in-Charge.
M&L for providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottom tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners & dismantling of walls and ceiling board any type complete all as specified and directed by Engr-in-Charge.
M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including removing of, alage and fungus applied on wall with trowel /roller complete all as specified and directed by Engr-in-Charge.
M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, incl taking down old frame/chowkat complete all as specified and directed by Engr-in-Charge.
All as per item No 54 above item but here-in size of frame 125mmx60mm for doors complete all as specified and directed by Engr-in-Charge.
S&F for factory made 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S&F for 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match incl taking down old shutter complete all as specified and directed by Engr-in-Charge.
S&F for 2nd class H.W. glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads & taking down old shutter etc complete all as specified and directed by Engr-in-Charge.
S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter & 3Nos- 100mm Aluminium hinges for each shutter complete all as specified and directed by Engr-in-Charge.
S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engr-in-Charge.
S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed by Engr-in-Charge.
S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed by Engr-in-Charge.
S&F for aluminum handles cast type anodized 200mm long (ISI Marked) complete all as specified and directed by Engr-in-Charge.
S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed by Engr-in-Charge.
S&F in repair, 150 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.
M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engr-in-Charge.
M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed by Engr-in-Charge.
M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed by Engr-in-Charge.
M&L for 18mm thick water proof solid MDF Board prelaminated both sides colured of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, and near cornices of structural glazing etc., fixed with solvent cement adhesive/ Silicon and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and directed by Engr-in-Charge.
M&L for extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked),complete all as specified and directed by Engr-in-Charge.
S&F in repair grating round 125mm size of CP complete all as specified and directed by Engr-in-Charge.
Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engr-in-Charge.
S&F for GI tubing 15mm bore medium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required complete all as specified and directed by Engr-in-Charge.
S&F GI tubing 15 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Fixing only in repair steel tubing and connection 15 mm dia bore to wall and laid in floors complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed by Engr-in-Charge.
S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron body Door closer hydrau?lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete unreinforced in of any desciption and in any position not otherwise specifically provided for (sunken floor) and concrete debris and rubbishoff to a distance n exc 100m complete all as specified and directed by Engr-in-Charge.
M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab complete all as specified and directed by Engr-in-Charge.directed.
M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed by Engr-in-Charge.
M&L, cement concrete 1:7:12 F-2 (40 mm graded aggregate ) in lean concrete complete all as specified and directed by Engr-in-Charge.
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed by Engr-in-Charge.
All as per item No 86 above but laid in trench or in floor complete all as specified and directed by Engr-in-Charge.
S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed by Engr-in-Charge. .
S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed by Engr-in-Charge.
Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete all as specified and directed by Engr-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.
S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and directed by Engr-in-Charge.
S&F of floor door spring etc complete all as specified and directed by Engr-in-Charge.
S&F of door closer hydraulically regulated design No 2etc complete all as specified and directed by Engr-in-Charge.
S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and directed by Engr-in-Charge.
S&F of Neoprene/EPDM Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and directed by Engr-in-Charge.
S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and directed by Engr-in-Charge.
S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and directed by Engr-in-Charge.
S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and directed by Engr-in-Charge.
S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and directed by Engr-in-Charge.
S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed by Engr-in-Charge.
S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified and directed by Engr-in-Charge.. Make: Jaquar Cat Part No. ACN 1131N or equivalent .
S&F for Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engr-in-Charge.Make: Jaquar Cat Part No.ACN CHR 1111SM or equivalent.
S&F for PVC connections 45/60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engr-in-Charge.
S&F in repair grating round 100 mm size of CP complete all as specified and directed by Engr-in-Charge.
M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified and directed by Engr-in-Charge.
M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x640x680 mm, strap 220 mm withsyphonic flushing cistern with necessary fittings complete all as specified and directed by Engr-in-Charge. Make Jaquar Cat Part No- SLS-WHT-6851S220PP/Kohler/Equalent Make.
S&F in repair wash hand basin table top of size 600x400x175 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-Charge. Make Jaquar cat part No - SLS-WHT-6601/Kohler or equalent make.
S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge. Make Jaquar cat part No - AHS-CHR-1553.
S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings complete all as specified and directed by Engr-in-Charge.
Fix in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete complete all as specified and directed by Engr-in-Charge.
S&F in repair for wall mixturer 3 in 1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower) complete all as specified and directed by Engr-in-Charge. Make Jaquar -Florentine (FLR-CHR-5281N).
S&F for CP brass Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed by Engr-in-Charge. Make : Jaquar Florentine (FLR-CHR-5167NB)
S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm Dia 1.2mt length long flexible tube of Make- Jaquar or equvelent complete all as specified and directed by Engr-in-Charge.(ALD-CHR-573)
Taking down old roof treatment in any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials complete all as specified and directed by Engr-in-Charge.
M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab complete all as specified and directed by Engr-in-Charge.
M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed by Engr-in-Charge.
Taking down old PCC tiles from roof and removing bedding at any position and removing the deberis outside the MD land, complete all as specified and directed by Engr-in-Charge.
Cement concrete tiles, coloured, machine pressed, factory made of size 25cmx25cm,/30cmx30cm and 20mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed layer in cement mortar 1:4 over roofs, complete all as specified and directed by Engr-in-Charge.
PCC 1:2:4 (nominal mix), type B-0 using 12.5mm graded crushed stone aggregate MIXED WITH WATER PROOFING COMPOUND AS PER MANUFACTURER INSTRUCTIONS as in roof kerbs/benching or mud stops, rounded or chamfered on edges including necessary formwork, complete all as specified and directed by Engr-in-Charge. Note: WPC shall be measured and paid for seperately under respective item
Dismantling of polycarbonated sandwitch type sheets complete all as specified and directed by Engr-in-Charge.
S&f 6.00 mm thick polycarbonate sandwitch type sheets in semi circle shape on roofs of desired colour and fixed with aluminium metal flat / angle / tee sections including rubber beadings and silicon water proofing sealent jell for joining the sheets together and self tightening screws of reputed quality and make complete all as specified and directed by Engr-in-Charge.
S&F venition blind for window including necessary items required for fix to wall complete all as specified and directed by Engr-in-Charge.
S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and directed by Engr-in-Charge.
S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick figured glass pane fixed in window shutter/ventilators including necessary beading/wooden beading andoil putty complete all as specified and directed by Engr-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed by Engr-in-Charge.
M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR complete all as specified and directed by Engr-in-Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls..
All as per item No 128 above but 5 Amp socket outlet, independent. complete all as specified and directed by Engr-in-Charge.
All as per item No 128 above but on the same board complete all as specified and directed by Engr-in-Charge.
All as per item No 128 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly complete all as specified and directed by Engr-in-Charge.
Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed by Engr-in-Charge.
Supply & fixing in replacement of switch 15 Amps SP one way ISI Marked complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of socket outlet 3 pin 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of socket outlet 2-in-1, 3 pin 5 amps and 15 amps flush type complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of stepped type electronic fan regulator flush type on the existing phenolic sheet etc complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 25 Amps complete all as specified and directed by Engineer-in-Charge.
M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 4 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable complete all as specified and directed by Engr-In-charge. Make of cable:- Finolex/Havells/Plaza/Kalinga. NOTE :- 2 runs of 6 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment.
All as per item No 49 above here-in-before but copper cable single core of size 4 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity complete all as specified and directed by Engr-In-charge. Make of cable:- Finolex/Havells/Plaza/Kalinga. NOTE :- 2 runs of 4 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment.
Supply and Fixing LED street light fitting 60 Watt pressure die case aluminium housing LED street light luminaires suitable for existing street light pole including all fixing accessaries complete all as per specified and directed by Engineer-in-charge.
S& fixing LED flood light luminarie 70 W 5000 K with high pressure die cast housing acting as heat sink in order to ensure better performance having IP66 ingress protection complete all as specified ad as directed by Engineer-in-cahrge at site.
S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories complete all as directed by Engr-in-Charge.
M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed by Engineer-in-charge .
Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out complete all as specified and directed by Engineer-In-Charge.
Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart complete all as specified and directed by Engineer-In-Charge.
Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-In-Charge.
M&L for sub class `B` bricks for cable protection complete all as specified and directed by Engineer-In-Charge.
Taking down/ out XLPE PVC insulated LT cable 1100 Volts grade from loose / hard soil / of any size complete all as specified and directed by Engineer-in-charge.
Supplying, laying and testing XLPE cable, insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 volts grade (Heavy Duty) with stranded aluminium conducotr of cross secional area 25 Sqmm 4 core complete all as specified and directed by Engineer-in-charge.
M&L for 40mm dia of light grade GI pipe laid under road/floor/on pole for laying/fixing of cable complete all as specified and directed by Engr-in-Charge.
S&F syntex street light box with 3 phase aluminium bus bar including 6 Amps SP MCB with mounting /fixing acessories complete all as specified and directed by Enginer-in-charge.
M&L danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for LT, 20x15 cm size complete all as specified and directed by Engineer-In-Charge.
Taking down old GI pipes 20 mm to 50 mm dia complete all as specified and directed by Engr-in-Charge.
Supply and fix steel water tubing 20 mm dia bore. medium grade galvanized including all fitting such as tees, bends, elbows redness, unions, clamps etc ISI marked laid in trench complete all as specified and directed by Engr-in-Charge.
Supply and fixing Gun metal gate valves 20 mm dia bore. ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for Iron pipe or union and fixed completely as specified and directed by Engineer -in-charge at site.
M&L for bringing cable Fault locator at site for locating the fault in Exixing 11000 Volts HT cable complete all as specified and directed by Engr-in-Charge.
M&L for cable jinting kit for 11 KV (Earthed) grade cable for straight through cold shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 Sqmm complete all as specified and directed by Engr-in-Charge.
S/Fix in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engr-in-Charge.
S/Fix in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc completed after dismantling old one complete all as specified and directed by Engr-in-Charge.
Supply & fixing in replacement of MCCB 100 Amps 4 pole 25 KA 415 volts complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of MCB SP 6 t0 32 amps 230 Volt complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of MCB SPN 32 Amps 230 Volts complete all as specified and directed by Engineer-in-Charge.
M&L for carefully dismantling Split AC of 2 TR and shifting and re-installation of existing split AC after servicing complete all as specified and as directed by Engineer-in-charge
Repair , servicing & preventive maintenance of split type AC's of capacity 1.5 TR comprising of the following tasks installed at different locations including refixing, commissioning and testing complete all as specified and directed by Engr-in-charge.
M/L charging of refrigerant to refrigerator up to required capacity after defect rectification and repar work all as per site condition complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement of starting capacitor 80-100/100-120 mfd for split type A/C's of capacity 1.5TR complete all as specified and directed by Engineer-in-Charge. Make-Telsa or ISI Marked.
S/F in replacement of running capacitor 30/36 mfd for split type AC unit as required at Site and complete all as specified and directed by Engr-in-Charge.
Taking down desert cooler of any size by disconnecting electrical supply, cleaning, oiling of all moving part of pump & exhaust fan/kit, Replacing PVC pipes, nozzles, distributors, pads, checking electrical connections complete all as specified and directed by engineer-in-charge.
Supply and fixing in replacement of wood pads(set of three)as per sample complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement the new desert cooler pump including testing for proper functioning complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement the new fan 450mm sweep for desert cooler complete all as specified and directed by Engineer-in-charge.
Supply and fixing in replacement new body of desert cooler as per sample duly painted of 20 SWG sheet with 22 SWG flops, front grill, PVC pipe, nozzle, distributor and nut bolts washers for fixing fan clamps, complete all as specified and directed by Engineer-in-charge.
Taking down and rewinding of fan 400mm of desert cooler with super enameled copper winding wire including replacement of bush complete all as specified and directed by Engineer-in-charge.
Supply and fixing front grill PVC of desert cooler as per sample complete all as specified and directed by Engineer-in-charge
Supply and fixing in replacement plug top 15 Amps complete all as specified and directed by Engineer-in-charge.
S&F in replacement PVC flexible copper wire 3 core of size 4 Sqmm complete all as specified and directed by Engineer-in-Charge.
Taking down ceiling fan of any sweep from existing place and repair/replacement of UNSV items complete all as specified and directed by Engr-in-Charge. Spare parts will be measured and paid separately.
M&L in replacement of ball bearing for fans of various size complete all as specified and directed by Engr-in-Charge.
Supply and fixing and connecting flexible copper twisted twin core of size 23/.00076 complete all as specified and directed by Engineer-in-Charge.
Supply and fixing capacitor 2.00 Mfd. in replacement of old unsv item complete all as specified and directed by Engr-in-Charge.
Supply and fixing capacitor 2.5 Mfd. in replacement of old unsv item complete all as specified and directed by Engr-in-Charge.
M&L for rewinding of ceiling fan of any sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge
Taking down exhaust fans of any size as per details given below and cleaning the dust properly. Oiling, greasing of ball and bearing including re-fixing and connecting of complete all as specified and directed by Enginer-in-Charge.
M&L for rewinding of exhaust fan 250 mm to 300 mm sweep with supper enameled coper wire of suitable size of any make/type/model including transportation and old material to be deposited in stores complete all as specified and directed by Engineer-in-Charge :-
Supply and fix in replacement of ball bearing of exhaust fan of any size complete all as specified and directed by Engineer-in-Charge.
Supply and fix exhaust fan sweep 250 mm in replacement made up of sturdy engineering plastic complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed by Engineer-in-Charge at site
Taking down carefully water heater (Geyser) any capacity any make after removing electric & water connections from existing system for carrying out repairs(Repairs will be measured and paid separately) and refixing the same after carrying out necessary repairs to original place complete all as directed by Engineer-in-Charge.
Removing existing hot & cold water copper/PVC flexible pipe connection from geyser and S&F new brass chromium plated water connection pipe with brass nut and washers of good quality about 45cm long in hot & cold water connections and connecting complete all as specified and directed by Engr-in-Charge.
Replacement of heating element 1.5 kW for 35ltrs capacity geyser ISI marked complete all as specified and directed by Engr-in-Charge.
Replacement of thermo static switch of geyser complete all as specified and directed by Engr-in-Charge.
S& F geyser assembly including gasket and nuts and bolts complete with fixing arrangement complete all as specified and directed by Engr-in-Charge.
S&F in replacement of water storage tank of suitable for 25ltrs capacity incl glass wool complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete all as specified and directed by Engr in Charge.
Supply and installation of PVC Duct 100 mm width For AC copper pipes and insulation as specified at site complete all as specified and directed by Engr-in-Charge.
S&F street light GI pipe bracket 50 mm dia 1.50metre length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc complete all as specified and directed at site by Engr-in-charge. Note :Brackets to be installed / grouted on wall or pole upto 11 mtr height.
M&L for scrapping of surface of steel tubular poles of any size with emery paper and painting of pole one coat of primer and two coats of silver colour paint including writing pole No on yellow colour with 30cm strip upto 1.5 Mtr height from ground level complete all as specified and directed by Engr-in-Charge.
Supply and filling transformer oil with breaking capacity 45 KV testing on load complete all as specified and directed by Engineer-in-Charge.
M&L for Dehyderation and filteration in cycles of transformer oil upto breaking capacity 45 KV is achieved and testing on load complete all as specified and directed by Engineer-in-Charge.
M&L for replacement of unservicable parts of solar water heater complete with servicable parts and making it servicable complete testing and commsioning and brazing of tanks for arrresting leakages complete all as specified and as directed by Engr in Charge.Note : parts will be measured hereafter as supply only.
Supply & install heating element 3 KW suitable for solar water heater appliation complete all as specified and directed by Engineer-in-charge.
M&L for earthing with galvanised steel plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25mtr deep from ground level) surrounded from all directions with charcoal dust, salt and edge of earth plate not less than 1.5 mtr below ground level connected to galvanised iron strip 32mmx6mm earth lead by means of nuts, bolts and washers incl excavation and earth work PCC chamber and RCC cover of 1:2:4 type B-1 using XPM weighing not less than 4 Kg/Sqmm using 20mm graded stone aggregate for coping/under covers, 20mm size GI pipe light grade for watering funnel wire mesh etc, complete all as specified and shown in electrical plate No-03 of SSR Part-I.complete all as specified and directed by Engr-in-Charge.
Singh Associates
Sanjay Associates
Akhil Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .