REPAIR AND MAINT OF LT UG CABLE, OH LINES AND CONNECTED WORKS IN MAP ACCN IN ZONE B AND C AND MODERNISED COD INFRA AND GI/CI PIPELINE, GATE VALVE, SECURITY LIGHT, LT PANELS AND CONNECTED WORKS FOR AF STN JABALPUR AND OUTSOURCING THE SERVICES FOR M

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of walls, floors, as per existing finishes etc complete all as specified.

Taking down carefully unserviceable/partly unserviceable light fittings any type, tube light fittings and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces

M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

-ditto- all as per item No 5 above but One light point controlled by one way switch

-ditto- all as per item No 5 above but One ceiling /exhaust fan point controlled by one switch and regulator

-ditto- all as per item No 5 above but One 3 pin 5 amp socket out point on the same board with other switches.

-ditto- all as per item No 5 above but One 3 pin 5 amps socket out let point on independent board

-ditto- all as per item No 5 above but One bell/buzzer point controlled by one bell push.

-ditto- all as per item No 5 above but One light point controlled by two 2-way switches

-ditto- all as per item No 5 above but for one socket outlet 15 Amp on independent board with 2.5Sqmm (FRLS) cable and 1.5 Sqmm (FRLS) earth wire.

S&F Switch piano flush type single pole one way 5 ampsof ISI mark. Make : Havells/ Anchor/ Plaza

S&F Switch piano flush button type two ways 5 Amps of ISI mark. Make : Havells/ Anchor/ Plaza

S&F Socket out let 2 in one, 5/3 pin 5 Amp of ISI Mark. Make : Havells/ Anchor/ Plaza

S&F Switch socket combination 5 Amps 5 pin flush type duly ebbosed ISI mark of make Make : Havells/Anchor/Plaza

S&F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal. Make : Havells/Anchor/Plaza

S&F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified Make : Havells/Anchor/Plaza

S&F Call bell AC-230 Volt single pole ding dong Make : Havells/Anchor/Plaza

S &F Bell push, flush type 5 Amps. Make : Havells/Anchor/Plaza

S&F regulator electronic step type 100/120 watt 5 step complete all as specified and directed Make : Havells/Anchor/Plaza

S&F Lamp holder insulated body with back plate for angle holder all as per specified Make : Havells/Anchor/Plaza

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1x20 Watt, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & including coneecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Havells Cat Pt No LHEXACP7IN1WO20, or Philips Cat Pt No TCW450 P 2XTLED 19 W P3397 or Crompton Cat pt No LTT8-20, or Bajaj Cat Pt No BCLSB 20 WH.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack,1x10 Watt, 2 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Philips/Havells/Crompton/ Bajaj

Supply and fix LED security light fitting of 30 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Philips Cat Pt No BRP046 LED 30 CW MR S1 PSU GR, or Wipro Cat Pt No LR02-331-XXX-57-XX, or Crompton Cat Pt No LSTP-30-CDL, or Bajaj Cat Pt No EXNT P 36L WH CR PC SD.

S&F Surface mounting round, decorative LED down lighter 12 WATT and transulent defuser, prefixed with flat profile and mounting clamps etc., complete all as specified Make Phillips Cat Pt No SM250C LED12S- 6500 PSU WH,or Wipro Cat Pt No LD-141-XXX-65-XX*, or Havells Cat Pt No LHEJNP5CPZ1W012

S&F LED light fittings decorative 34/36 Watt surface mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed of Make Phillips Cat Pt No SM365C LED 32-65 PSU OD GR, or Wipro Cat Pt No CRCO10S036HP57G1 or Crompton Cat Pt No LCTLSN-36-CDL, or Havells Cat Pt No LHEWEBP7IL1W036.

S&F LED light fittings decorative 36/34 Watt recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed Make Philips Cat Pt No RC380B LED36S -6500 G4 L60 W60 PSU OD, or Crompton Cat Pt No LBRP40CL22CD or Wipto Cat Pt No. LM25-481-XXX-65-G1.

S&F in repairs GI pipe 'light grade' bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for 30W security light fitting complete all as specified and directed

S&F in repairs earth enclosure with 2 pin earth plug socket complete with MCB SP 20/25 Amp, flush mounting type Make -Havells/ LEGRAND/L&T

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

S&F MCB DB made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 ways Double door , IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

NOTE FOR ITEM Nos 24 to 28 -(i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB to be fixed on wall including frame made out of MS flat 40x5mm (ii).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. (iii) MAKE OF DB & MCB L&T/LEGRAND/ SCHNEIDER

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm (FRLS), earth continuity conductor of size 2.5 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 2.5 sqmm & PVC conduit shall be measured as one unit.

M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm (FRLS), earth continuity conductor of size 4 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 4 sqmm & PVC conduit shall be measured as one unit.

S&F in repairs MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified Make -L&T/LEGRAND/SCHNEIDER

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

Supply & Fix in repairs latest version, energy saving LED bulb of 7 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs latest version, energy saving LED bulb of 9 Watt make Phillips/Havells/bajaj.

Supply & Fix in repairs LED tube rod retrofit type of 18/20 Watt energy efficient,eco freindly of make Crompton Cat Pt No LT5RT-18-CDLor Havells Cat Pt No LHLDEFXD5L8R020 or Philips Cat Pt No 20W865 T8 IND I-2100 lm, or Bajaj Cat Pt No BLRB 20W CW LED.

Supply & Fix in repairs LED Batten suitable for 18/20 Watt LED tube make of Crompton Cat pt No DMLN1LT8-16 or Havells Cat Pt No LHFXCEP1TNNW020 or Philips Cat Pt No BN021C LED20S PSU CW GR S2, Or Bajaj Cat Pt No BLRB-DB-118 I.

Supply & fix in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acraylic cover suitable for 15/20 w led lamp fitting including lamp all as specified and directed. MAKE: HAVELLS/Philips/Crompton/Bajaj

S&F in repairs modular switch piano flush type single pole one way 5 amps. Make : Anchor/ Havells/ Leader/ HPL

S&F in repairs Modular socket out let 2 in one, 5/3 pin 5 Amp. Make : Anchor/ Havells/ Leader/ HPL

S & F in repairs modular switch socket combination 6 pin, 3 module 5/15 Amps flush type universal. Make : Anchor/ Havells/ Leader

S&F in repairs modular bell push, flush type 6 Amps. Make : Anchor/ Havells/ Leader

S & F in repairs modular electronic regulator 100/120 watt step type. Make : Anchor/ Havells/ Leader/ HPL

S&F MCCB DB vertical type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door , MAKE - L&T/LEGRAND/Havells

Dismantling carefully the existing U/S LT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed by Engr-in-Charge.

Supply and stringing, stretching and fixing ACSR conductor for over head line securing on pole complete including binding wire ,jointing sleeves aluminium tap and PG clamp etc of any size all as specified and as directed.

Fixing only/stringing only old dismantled ACSR conductor for over head line securing on pole complete including binding wire, etc of any size complete all as specified and as directed.

Note for item 49 & 50 Jumper on cut point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeves. Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Removing /opening of binding from shackle/pin insulator and restringing of single conductor, tightening of LT over head ACSR /copper conductor any size including binding with copper /aluminium binding wire to over head conductor including renewal of jumpers complete all as specified Note:- Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Dismantling existing u/s guard wire with cradles of any size from LT OH line and removing from site of work complete all as directed by Engr-in-Charge.

S&F GI steel continuous earth wire & cradle 4mm dia on cross arms of poles for guarding including binding with aluminum wire 16 SWG etc. complete all as specified and directed by Engr-in-Charge.

Dismantling of U/S insulators of any size and type complete from its position and removing all as directed by Engr-in-Charge.

Fixing only old LT pin type insulator obtained from item No 55 above.

Fixing only old LT shackle type insulator obtained from item No. 55 above

S&F pin type, porcelain virteous, white, brown or green insulator 100mm height, 65mm dia for 1100 Volts grade, including one GI MS spindle, two GI washers, one GI nut complete all as specified and directed by Engr-in-charge.

S&F LT shackle type, porcelain virteous White, Brown or Green insulator 90mm dia, 75mm height, including GI MS straps of Size 31 x 3 mm washers, 12mm dia, bolts suitable for 1100 volts grade complete all as specified and directed.

Dismantling of u/s stay assembly carefully including stay wire necessary excavation and earth work in any type of soil, demolition of PCC of any type and removing rubbish to as distance n. exc 50m at low lying area complete all as specified.

S&F stay assembly complete with accessories and stay rod 16mm dia and 180 cm long, including ms galvanized stay plate 300 mm x300 mmx6mm and galvanized thimble complete all as specified and shown in electrical plate No 1. of SSR 2009 ( Part-I ) Note:- (loop type insulator, stays clamps, excavation and earth work and concrete shall be measured and paid separately)

S&F loop type insulator porcelain virteous, White, Brown or Green & with over all dimension 65 x 90 mm, clearance of hole. 16mm vitreous,porcelain, white, brown or green complete all as specified and directed including removing of existing unserviceable from its position.

S&F in repairs galvanized steel wire stranded of size 7/2.24mm including necessary binding strengthening complete all as specified and directed.

Dismantling of u/s existing cross arms by means made from channels, angles, U/S FI clamps, nuts, bolts etc. from OH line complete all as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts ,bolts, in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide complete all as specified.

-Ditto- all as sper item No 65 above but fixing old existing cross arms received against item No 16 above including cleaning, removing stain and including preparation of old steel surfaces applying two coats of aluminum paint over and including a coat of Red oxide (primer) all as directed by Engr. in charge.

Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.

Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug , bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.

Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location directed by engr-in -charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as sp[ecified and directed.

-Ditto- all as per item No 70 above but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.

S&F in repairs 1100 Volts grade line composite phase separators, moulded & bolted type as per IS 1445 - 1997 suitable for the following :-

Taking down u/s LT U/G cable (including all mounting accessories, bricks and sand etc ) from trenches, wall, floor etc and removing to store for safe custody upto 25 sqmm complete all as specified and directed. Note:- Excavation for taking out cable will not paid for separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s U/G cable (including all mounting accessories, bricks & sand etc) from trenches, wall, floor etc and removing to store for safe custody above 35 upto 120 Sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s LT U/G cable from trenches, wall, floor etc and removing to store for safe custody above 120 to 150 sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excavated for laying of cables

S&F XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes:- Note:- Rate is inclusive of cable gland & cable lugs. The contractor shall be used old cable route indicator retrietive from item No 33 to 35 above. Fixing cost for the same shall be included in the quoted rates of these items. Make : Havells/GLOSTER/Poly Cab/Paragon

2 core, 4 sqmm cross sectional area

2 core, 6 sqmm cross sectional area

2 core, 10 sqmm cross sectional area

4 core, 16 sqmm cross sectional area

3-1/2 core, 25 sqmm cross section area

3-1/2 core, 35 sqmm cross section area

3 -1/2 core, 50 sqmm cross sectional area

3 -1/2 core, 70 sqmm cross sectional area

3 -1/2 core, 95 sqmm cross sectional area

3 -1/2 core, 120 sqmm cross sectional area

3 -1/2 core, 150 sqmm cross sectional area

S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make :- JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs 50mm bore GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs RCC hume pipe for road crossing of cables class NP-2 of size 100 mm dia complete all as specified.

Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.

M&L for boring of hole under road/hard standing by trenchless technology including S & F HDPE pipe "heavy duty " of size 100mm bore fixed in repairs complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.

Relaying old dismantaled Bricks covering with width equal to length of bricks as mechanical protection to cable complete all as specified and as directed.

Taking down of faulty LT UG cable of size upto 400 Sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete. Note:- Excavation/earth work and cable jointing & jointing kit shall be measured and paid separately under relevent item of schedule.

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 10 Sqmm 4 core to 16 Sqmm 4 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 70/ 95 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size120 sqmm 3.5 core cable size to150 sq mm 3.5 core complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal

Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/towers/Perimeter Fencing of any type upto 9 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr in charge & complete all as specified and directed Note :- Ballast, Lamp holder, capacitor, ignitor, covers and lamps of required wattage/type shall be measured and paid separately.

Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by engr-in-charge

S&F in repairs Electronic driver suitable for LED fitting 25 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 45 watt Make : bajaj/Wipro/Havells/ Crompton

S&F in repairs Electronic driver suitable for LED fitting 60 watt Make :Bajaj/Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-40 base Make:Bajaj/Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-27 base Make:Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 40/45 watt type Retro fit E-22 base Make: Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 30/35 watt type Retro fit E-22 base Make: Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 20/25 watt type Retro fit E-22 base type Make: Bajaj/Havells/Philips/Crompton

Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed

M&L for Preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr in charge.

S&F LED street light lumanaries of size 90 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 72 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make : Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 60 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 45 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 25 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acraylic cover suitable for 1x20/25w LED lamp including fitting complete all as specified. Make : Bajaj/Havells/Philips/Crompton

S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c )Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI/PARAGON

S&F in repairs PVC insulated 3 core 1.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI/PARAGON

S&F in repairs Astrorex D-22, Multifunctional digital time swithces Make : Legrand/L & T/ MDS/ GIC

S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval complete all as specified and as directed.

S&F MCCB 630 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 400 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make :Legrand/Havells/L&T

S&F MCCB 250 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 125 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make :Legrand/Havells/L&T

S&F MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F in repairs enclosure SUITABLE FOR MCCB TP complete all as specified Make : Legrand/Havells/L&T

Taking down MCCB any type & any size

S&F ON LOAD change over switch 4 pole 400amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 315amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 200amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 160amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 125amps with sheet metal enclosure, Make : L&T schneider/Legrand

S&F ON LOAD change over switch 4 pole 63 amps with sheet metal enclosure, Make : L&T schneider/Legrand

Taking down change over switch any type & any size

M&L for Preparation for surface of existing PCC poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality Exterior grade apex paint all as directed by Engr in charge.

S&F LED street light lumanaries of size 100 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 120 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED street light lumanaries of size 150 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED flood light lumanaries of size 150 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED flood light lumanaries of size 180 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

S&F LED flood light lumanaries of size 200 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Havells/Philips/Crompton

Cutting existing the following cast iron pipes in position for insertion of new pipe/tees, branches etc. complete all as specified.

250 mm bore

200 mm bore

150 mm bore

100 mm bore

Taking up the following cast iron water mains (including all fittings) incuding flanged ends rubber joints with spigot and socket ends and lead joint including burning out joints and recovering lead of size :- Note : Excavation/earth work shall be measured and paid separately.

100 mm bore

80 mm bore

S&F the following cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of size complete all as specified and directed. Make : TATA/Keso Ram/Electro Steel

100 mm bore

80 mm bore

M&L for run lead joints for the following size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed:-

100 mm bore

80 mm bore

S&F the following rubber tyton joint of size:-

100 mm bore

80 mm bore

S&F in repairs machanical Gypsum joint ISI marked for spigot end pipe of following sizes:-

100 mm bore

80 mm bore

S&F 200/250mm bore spigot/flanged/ socketed CI fittings. such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc complete all as specified.

Dismantling/taking out unserviceable sluice valve of size 80mm to 250mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.

S&F the following CI sluice valves both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed:- Make : Kirloskar/L&T/Upadhiya

80 mm bore

100 mm bore

S&F the following CI sluice valves both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed:- Make : Kirloskar/L&T/Upadhiya

150 mm bore

200 mm bore

250 mm bore

Dismantling/taking out unserviceable air release valve/non return/foot valve/fire hydant valve of any size by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix CI double end flanged and drilled non return valve of size 200 mm PN-1.6 dia ISI MARKED MAKE : Kirloskar/Upadhyay/L&T

Supply and fix CI double end flanged and drilled non return valve of size 100 mm dia PN-1.6 ISI MARKED MAKE : Kirloskar/Upadhyay/L&T

Supply and fix CI foot valve, flanged end and drilled of size 100 mm dia ISI MARKED MAKE : Kirloskar/Upadhyay/L&T

Supply and fix cast iron double ball air release valves of size 80mm as per IS 14845, PN rating H-7 ISI marked. MAKE : Kirloskar/Upadhyay/L&T

Cutting of road /hard standing for laying /dismentling of pipe line and making good surfaces matching with the existing surface after laying of pipe line.up to 30 cm

Taking up or down the following old unserviceable GI Tubing and connections including cleaning for refixing:- Note :- Excavation/earthwork shall be measured & paid separately.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing the following old GI Tubing and connections in New or old position (walls, Ceiling, Floors etc) of sizes:-

15 mm bore

20 mm bore

25 mm bore

40 mm bre

Laying only the followiing old serviceable removed GI Tubing from site and connection in New or old position (in trenches) of sizes :-

20 mm bore

25 mm bore

40 mm bore

50 mm bore

S&F the followiing GI tubing medium grade with all fittings and fixed complete laid in trenches of size :-

20 mm bore

25 mm bore

40 mm bore

50 mm bore

S&F the followiing GI tubing medium grade with all fittings complete to walls and ceilings or laid in floors of size :

15 mm bore

20 mm bore

25 mm bore

40 mm bore

Taking down/removing the following Unserviceable Gate valve/stop valve from water supply lines, closing the opening with plug or preparing for new as required necessary fittings complete all as specified.

20 mm bore

25 mm bore

40 mm bore

50 mm bore

S&F the followiing Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete :- Make : Kartar/Zolto/Sant/Leader

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking down/removing unservieable bib taps 15/20mm bore from pipe line/tanks complete all as specified and directed.

S&F 15mm bore bib tap cast copper alloywith crutch/buterfly handle screwed for iron pipe complete all as specified. Make - Prayag/Polytuff.

S&F 15mm bore bib tap standard of PTMT any colour (minimum wt 15mm - 90gms) screwed for iron pipe complete all as specified. Make - Prayag/Polytuff.

Cutting the following existing galvanised iron pipe in position for insertion of new pipe/tees, branches etc.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

80 mm bore

100 mm bore

S&F in replacement the following stainless steel spindle suitable for following dia of sluice valve complete with stainless steel nut and threading as per sample & directed by engr-in- charge

100 mm bore sluice valve

80 mm bore sluice valve

S&F in replacement Digital water leval indicator system 150 mm size digit direct display,operated on 230v Ac, suitable for upto 20 metre height over head Reservior/underground sump of any capacity, preadjustable alarm for upper & lower level, temp range -5 to 50 degree, humidity up to 90% RH, reset push switch for silent the alarm including 4 core 1.5 sqmm copper cable. MAKE: SURYA ELECTRONICS & CONTROLS / RECTRONIC DEVICE & CONTROLS

Comprehensive maintenance of DG set including preventive maintenance checks at least once in a month, checking up of engine and alternator for trouble free functioning and attending break downs/ complaints as and when required. The type of work / maintenance services to be carried out during comprehensive maintenance are as under :- for 320 KVA DG SET OF CDA

Checking of Engine Oil level.

Checking of oil bath cleaner oil level.

Drain sediments from fuel tank.

Checking of pre- cleaner dust pan.

Checking of air cleaner restriction.

Checking of coolant level.

Record Oil pressure..

Checking /tightenig of all bolts / nuts of engine and alternator.

Checking of Engine Oil level.

Checking of AVM pads.

Checking of diaphragm coupling..

Checking of tappet clearance.

Clean fuel tank breather .

Clean crank case breather .

Checking of Air piping.

Cleaning of oil bath Air cleaner Tray screen.

Check / adjust Belts.

Checking battery voltage, water level and apply jelly on terminals.

Checking fan hub / air blower hub and water pump.

Cleaning turbo charger.

Tighten manifold Nuts of cops screws.

Cleaning of electrical connections with CTC solution.

Checking of safety contols

Cleaning of cooling system / radiator assembly.

Cleaning of Engine and radiator assy.

Supply & fix set of fuel pre- filters and fine -filters as per sample and make for the following capacities of DG sets. Each set shall be comprising complete set of pre/fine filters. a) 320 KVA Capacity, Make Kirloskar (1Nos).

Supply & fix set of lube / engine oil filters / catridges as per sample and make for the following capacities of DG sets. Each set shall be comprising complete set of pre/fine filters. a) 320 KVA Capacity, Make Kirloskar (1Nos). a) 320 KVA Capacity, Make Kirloskar (1Nos).

Supply & fix set of Air filters and fine -filters as per sample and make for the following capacities of DG sets. Each set shall be comprising complete set of pre/fine filters. a) 320 KVA Capacity, Make Kirloskar (1Nos).

Supply & fix set of Operating filters and fine -filters as per sample and make for the following capacities of DG sets. Each set shall be comprising complete set of pre/fine a) 320 KVA Capacity, Make Kirloskar (1Nos). filters.

coolant suitable for 320 KVA DG set

Supply & fix Battery lead with stranded copper conductor of size 95 /70sqmm single core PVC insulated, flexible.

Supply & fix V- belt for fan A 56/A55/B47.

Supply & fix stopping solenoid coil 12V for 320KVA DG set.

Supply & fix off solenoid coil 12V for 320 KVA push on type ( for double Tank DG set).

Supply & fix battery terminals of copper.

Supply & fix governar cord

Supply & fix fuel pipe filter to FIP wire braided.

Supply & fix fuel pipe (rubber pipe ) upto 15 mm size from fuel tank to the DG set & over flow return .

Engine oil suitable for 320 KVA DG Set

Supply & fix carbon brush suitable for 320KVA Gen Set .

Supply & fix gate valve 15 mm dia for the fuel tank out let.

Supply & fix Water outlet and inlet hose pipe from radiator to Engine and back Engine to radiator .

Supply & fix Lub oil pipe.

water sepaerator suitable for 320 KVA DG Set

Supply & fix DC ameter 12 V of range (-) 30- 0- (+)30 A .

Supply & fix Lub oil pressure guage 0 to 10 kg / sq cm.

Supply & fix Maintenance free power pack unit 24 Volt,diamension-430x255x235 suiable for generating set 160 KVA to 500KVA,CAT NO-XCL/24/3200 MODEL X-CELL OF make HBL POWER SYSTEM LIMIED

Repairing the self starter of Mico make after removing from the Gen set of capacity 320 KVA and transporting to an authorised sevice centre including replacement of the following U/S parts:-

Armature . Qty : 1 No

Bendex of suitable size : 1 No

Bearing / bushes : 1 set

Relay switch of suitable size : 1 No

Drain the out lived engine oil, clean the oil sumpand filling the engine oil all as directed.

Providing aluminium cladding to the exhaust pipe and silencer of the DG sets of any capacity by engaging highly skilled technicians after removing the existing totally worn out asbestos rope ( wherever available) and prepairing the surface , applying one coat of red oxide primer and including 50mm thick high quality glass wool thermal insulator packing which is bidinding tightly with chicken wiremesh of approved quality to the exhaust pipe and neatly finishing sealing with 24 SWG aluminium sheet all as directed by engr -in- charge.

Opening the coupling , dismantling the alternator carefully removing the fly wheel dismantling the unserviceable starting gear wheel ,including minor repairs & cutting welding ( if required) & transporting to Authorised service center fixing back the alternator after repair and properly coupled back all as directed 320 KVA Gen Set complete.including installation, testing & commissioning after repair

Material & labour for Rewinding the ALTERNATOR (stater & roter) with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr -in - charge

BATTARY 12 VOLT 180 AH

Automatic voltage regulator complete with diod Electronic static type suitable for DG Set of 320 kVA 3 Phase 415 Volts.

Electonic governar suitable for DG Set of 250/320 kVA 3 Phase 415 Volts.

Operation and routine/Daily maintenance of DG 320 KVA installation (CDA MAIN BUILDING) with deputing of one skilled FGM operator for ONE shift of 08 hours each shift for 8 hours daily EXcluding Sunday and holidays for operation o fDG sets, PANNELS for proper running (1) DG sets 320 KVA- 01No , (2) control panel boards of DG sets and operating PANNELS. Note :- If quoted rates are less than minimum fair wages inclusive of GST, EPF, ESIC as applicable the bid shall be treated as non-bonafide and will be rejected. No objection/claim in this regard will be accepted.

Notes for item No – 211 as follows:- To maintain log sheet and log books for all plants and monthly duty roaster for duty staff.

POL shall be arranged by the Engr-in-Charge as per requirement and issued to contractor on schedule B free of cost for bonafide Government use only & a pucca bound register shall be maintained showing day to day input/output only signed by JE/Engineer-in-charge/Contractor.

The unit per day means 8 hours. The contractor shall deployed one FGM per shift of 08 hours at installation

It is the responsible of AGE/JE to ensure that attendance register is maintained at all the installation duly signed kept on record and payment of trade man for the Nos of days present will only be made, Engineer-in-Charge will be responsible for payment of trademan in his presence. Contractor shall provide proper dress to tradesmen as approved by Eng-in-Charge and during duty hours all tradesmen shall be in proper uniform otherwise necessary recovery @ double the quoted rate for per shift shall be made from his dues.

In case the contractor does not operate the DG set for a day or part thereof due to any reason whatsoever double of the quoted rate to each shift will be recovered.

The quoted rate is deemed to include for all surrounding premises cleaning such as in side the DG Set, outside, toilet including cutting of grass shrubs etc and always keep ready position whenever any visiting officer visits the site the DG Set room should be cleaned and neat in all respect. In case any bad/adverse remark given by any visiting officer at any time the necessary recovery @ double the rate quoted per remark per day will be charged from the contractor as certified by Engineer-in-Charge and no claim whatsoever is admissible on the account, GE’s decision is final and binding on this account.

Trades man should be wear always Operators uniform and take preventive /safety measures and will use protective clothing as per code of IE rules. Department will not responsible for any type of incident.

Contractor shall be made security pass for all operators and maintain proper register duly signed by all concerned.

T&P like spanners, screw drivers, pipe wrench, torch light, other items required for repair etc. will be provided by the contractor.

Leave of deployed person in inescapable cases shall be allowed on prior intimation but Contractor on demand of Engineer-in-Charge, shall arrange alternate arrangment. Payment shall not be allowed for leave period.

In no case wages of deployed persons shall be less than the Minimum wages fixed by Govt Competent Authority. It is mandatory requirement for Contractor that payment of deployed person shall be made through Cheque/RTGS/Acceptable Electronic Mode only. Proof of payment shall be submitted by Contractor to Engineer in Charge monthaly basis or during claiming on account of Advance (RAR)/FB.

The Employees Provident Funds & Miscellaneous Provisions (EPF & MP) Act, 1952. shall be strictly adhered to by the Contractor. Social Security to workers i.e. EPF, ESIC, Personal Insurance(if applicable) on part of Employer shall be paid by Contractor and accordingly, Contractor/Bidder shall include all these factors in his quoted rate.

Statuatory levies/GST if applicable on part of contracts shall be paid by Contractor and accordingly, Contractor/Bidder shall include all these factors in his quoted rate.

Deployed person shall report daily to JE/Engineer in charge or nominated officers by Accepting Officer for their attendence & obtain instructions. An attendence register shall be maintained by Contractor on site shall be certified by MES rep every day.

An uniform of blue shirt/jersy duly embossed "MES OUTSOURCING SERVICES" at back and name plate of the person on front left shall be provided by contractor to all workers at his own cost.

Documentation - Attendance register & wages register,Daily work register as per the format provided by the Deptt. shall be prepared & maintained at his own cost.

Schedule of credit amount of Rs. 2,27,302.52 to be deducted during AOC

SONAL CONSTRUCTION AND ENGINEERS

Goodluck Enterprises

GAUTAM ELECTRIC WORKS