Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹35.3 L+₹2.6 L (7.96%)Rejected-Finance R O H NO 55 SEC D BHARAT NAGAR TALAB TILLO JAMMU 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | L2 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862, C/o 56 APO
GER-51/2022-23 Repair/replacement of Old rusted pipe line, valves etc and repair/replacement of pump and motors at various water supply installation at Naushera under GE 862 EWS
2022_MES_553917_1
GER-51/2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
GE 862 EWS
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹80,000
Yes
26 Oct 2022
23 Sept 2022
20 Oct 2022
23 Sept 2022
18 Oct 2022
6 Oct 2022
Amount
Excavation in trenches n exceeding 1.5 m wide and n exc 1.5 m depth for water pipe line in hard/dense soil complete all as specified and directed.
Excavation in trenches n exceeding 1.5 m wide and n exc 1.5 m depth for water pipe line in soft/disintegrated rock complete all as specified and directed.
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick (soil) complete all as specified and as directed.
Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
S&F for 150 mm bore cast iron non return valve, heavy duty with gun metal sheet, both end flanged including making flanged joint, rubber gasket, nuts, bolts and washers ISI marked, class PN- 1.6 conforming to IS-5312 (Part-2)-1986 complete after taking down old unserviceable non-return valve of any type all as specified and directed.
All as per srl item No 5 above but 100 mm bore complete all as specified and directed.
All as per srl item No 5 above but 80 mm bore complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing and connection in any position, including cleaning for refixing or removal to store complete all as spcified and directed.
All as per srl item No 8 above but 25 mm bore complete all as specified and directed.
All as per srl item No 8 above but 40 mm bore complete all as specified and directed.
All as per srl item No 8 above but 50 mm bore complete all as specified and directed.
All as per srl item No 8 above but 80 mm bore complete all as specified and directed.
All as per srl item No 8 above but 100 mm bore complete all as specified and directed.
All as per srl item No 8 above but 150 mm bore complete all as specified and directed.
Supply, laying and testing of 20 mm bore steel water tube (medium grade) with screwed and socket joints together with all fittings such as bends, elbows, tees, short pieces, connection, back nuts, diminishing pieces, caps plugs & union etc and fixed to wall, ceilings or laid in floor/ trenches complete all as specified and directed. (Note :- Excavation work will be measured and paid separetly)
All as per srl item No 15 above but 25 mm bore complete all as specified and directed.
All as per srl item No 15 above but 40 mm bore complete all as specified and directed.
All as per srl item No 15 above but 50 mm bore complete all as specified and directed.
All as per srl item No 15 above but 80 mm bore complete all as specified and directed.
All as per srl item No 15 above but 100 mm bore complete all as specified and directed.
All as per srl item No 15 above but 150 mm bore complete all as specified and directed.
Fixing and laying only old serviceable 20 mm bore steel water tubing, any grade, with screwed and socket joints together with all new fittings such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps plugs & union etc and connections in new or old positions (wall/ceiling, floor, in trenches etc) complete all as specified and directed. (Note:- GI pipes retrieved from taking down shall be used after cleaning).
All as per srl item No 22 above but 25 mm bore complete all as specified and directed.
All as per srl item No 22 above but 40 mm bore complete all as specified and directed.
All as per srl item No 22 above but 50 mm bore complete all as specified and directed.
All as per srl item No 22 above but 80 mm bore complete all as specified and directed.
All as per srl item No 22 above but 100 mm bore complete all as specified and directed.
All as per srl item No 22 above but 150 mm bore complete all as specified and directed.
S&F for 80mm bore CI sluice valve class PN-1.0, heavy duty ISI marked as per (IS-14846- 2000) with flanged ends with 02 Nos of rubber gaskets, nut, bolts and washers alongwith stainless steel spindle and operating wheel complete after taking out old unserviceable sluice valve with fitting etc all as specified and directed.
All as per srl item No 29 above but 100 mm bore complete all as specified and directed.
All as per srl item No 29 above but 150 mm bore complete all as specified and directed.
M&L for Rubber gasket joints suitable for 150mm bore flanged joints CI pipes confirm to latest IS including nuts and bolts complete all as specified and directed.
M&L for Rubber gasket joints suitable for 100mm bore flanged joints CI pipes confirm to latest IS including nuts and bolts complete all as specified and directed.
M&L for Rubber gasket joints suitable for 80mm bore flanged joints CI pipes confirm to latest IS including nuts and bolts complete all as specified and directed.
M&L for construction of brick masonry new valve pit chamber of size 900mmx900mmx900mm (internal) size, 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing well burnt brick masonry wall of 230 mm thick, built in CM 1:6, 15 mm thick rendering in cement mortar 1:4, finished even and smooth without using extra cement internally and externally and providing 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame, embbeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron, appplying two coats of synthetic enamel paint of approved shade, over a coat of primer (Red Oxide zinc chrome) to all exposed surface of sheet and making good all disturbed surface complete after dismantling old unserviceable valve chamber all as specified and directed.
Cleaning of valve pit chamber of any size and depth by taking out mud, muddy water, including cleaning of vegetation around the pit covering area 1mtr around the pit and depositing the same at a distance n. exc 20 mtr away from pit including swipping free from all type of dirt including rectifying the leakage of valve of any size by using of appropriate size required packing materials complete all as specified and directed.
S&F for 15 mm bore gunmetal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for iron pipe complete as in repair all as specified and directed.
S&F for 20 mm bore gunmetal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for iron pipe complete as in repair all as specified and directed.
S&F for 25 mm bore gunmetal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for iron pipe complete as in repair all as specified and directed.
S&F for 40 mm bore gunmetal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for iron pipe complete as in repair all as specified and directed.
S&F for 50 mm bore gunmetal gate valve (ISI marked) heavy duty with iron wheel head, screwed both ends for iron pipe complete as in repair all as specified and directed.
M&L for 12mm to 20mm neck dia of bolts and nuts (machine made) with hexagonal or square head at one end and screwed the other with washers of length exc 10 cm and n exc 30 cm after taking down of old nuts and bolts complete all as specified and directed.
S&Ffor rolled Mild steel framed work such as grills, gratings, MS Sheets,Angles etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete as in repair all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer with spray gun of existing colour shade on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer with spray gun of existing colour shade on surfaces of any description, n. exc. 60cm girth including holderbats, distance pieces, etc (length measured over bends, branches etc) complete all as specified and as directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30cm high with white paint complete all as specified and directed.
M&L for painting stops, commas, short lines, dashes, hyphens, brackets etc with white paint complete all as specified and directed.
Dismantling/taking out existing unserviceable air release valve from CI/GI main complete and supply & fixing new cast iron air release valve with 02 Nos of air- outlets 25mm and inlet 80 mm bore for cast iron pipe/GI Pipe, MS Clamps with welded socket of suitable size, nut, bolt, washer, gasket including drilling and air ball complete all as specified and directed.
Dismantling/taking out existing un serviceable air release valve from CI/GI main complete and supply & fixing new cast iron air release valve with 02 Nos of air- outlets 25mm and inlet 50 mm bore for cast iron pipe/GI Pipe, MS Clamps with welded socket of suitable size, nut, bolt, washer, gasket including drilling and air ball complete all as specified and directed.
Dismantling of 15HP motor and starter of centrifugal pump (Make : Kirloskar/Jyoti/BE/ Crompton greaves/Bhart Bijlee/WPIL/Vogal etc.) from pump after disconnection of mechanical tyre coupling and unbolting from foundation base plate,discconection of electric connection from terminal/LT control panel, 3 phase, 415 volt loading/unloading the motor to vehicle and transportation of the motor from differnt location of Naushera AOR E/M installations to workshop for repair / replacement, open the motor and cutting the burnt winding and clean the rotor & stator with CTC or other cleaning agent and re-winding of stator winding with super enamelled copper wire of gauge and turn as per existing, insulating the leads with insulating tubes and varnishing the stator with good quality of insulating varnish and after that, heating the stator in heat chamber for continuous two days for better insulation resistance. Re-assembling the stator & rotor carefully after replacement of worn out bearings as per existing and again transportation of the motor through vehicle from workshop to differnt location of Naushera AOR E/M intallation including loading/unloading the motor on its base frame, connection of motor with pump with tyre coupling and fixing to the base frame by bolts. After checking up the alignment, testing of motor with megger for checking of insulation resistances, electric connection of motor to the control panel, testing on load for continous running for three hours complete all as specified and directed by Engr-in-Charge. (Note : Re-winding wire of new super enamelled coper wire of existing gauge/size/quality and bearing will be measured and paid separately as supply only).
All as per description of srl item No 50 above but suitable for capacity of motor 25 HP to 40 HP complete all as specified and directed by Engr-in-charge
All as per description of srl item No 50 above but suitable for capacity of motor 50 HP to 60 HP complete all as specified and directed by Engr-in-charge.
All as per description of srl item No 50 above but suitable for capacity of motor 100 HP to 125 HP complete all as specified and directed by Engr-in-charge.
Supply only super enamelled copper wire of existing gauge/ size / quality to match with the existing as comply including all insulating material such insulating paper, sleeves, varnish etc drying the copper winding after varnish with blower or heater including soldering all internal connection and testing complete all as specified and directed.
Metal coating for upgrading of pump shaft under size and turning the same including and making thread porperly by machining work of required size of bush/bearing etc for 15 HP pump set complete all as specified and directed by Engineer-in-charge .
All as per the description of srl item No 55 above but for 20 HP to 40HP pump set complete all as specified and directed by Engineer-in-charge
All as per the description of srl item No 55 above but for 50 HP to 60HP pump set complete all as specified and directed by Engineer-in-charge
All as per the description of srl item No 55 above but for 100 HP pump set complete all as specified and directed by Engineer-in-charge
Metal coating for housing case for bearing and making the same upgradation from under size turning the same to required size of motor or pump set including supply and replacement of nuts, bolts and sleeves, filling of greese for pump set & motor complete all as specified and directed by Engr-in-charge
Supply only ball bearing 7308.
Supply only ball bearing 6310.
Supply only ball bearing 6311.
Supply only ball bearing 6313.
Supply only ball bearing 6314.
Supply only ball bearing 6316.
Disconnecting the 100 HP centrifugal pump (Make : Kirloskar/Jyoti/BE/Crompton greaves/Bhart Bijlee/WPIL/Vogal and others) from the motor after disconnection of mechanical tyre coupling, suction/discharge pipe line and unbolting from foundation base plate, loading/unloading the pump to vehicle and transportation of the pump from differnt location of Naushera AOR E/M installation to workshop as directed by Engineer-in-Charge for repair/replacement/maintenance and including dismantling & re-assembling the pump impeller with housing, stainless steel shaft, bearing for smooth running, replacement of packing gaskets, shaft sleeve, neck ring, check nuts, mild steel nuts and bolts, white metal bush etc with necessary oiling and greassing and again transportation of the pump through vehicle from workshop to differnt location of Naushera AOR E/M installations after necessary repair/replacement/maintenance including coupling (iron) cutting/drilling/grinding / making the bore and fixing the unique rubber coupling as required thickness in the existing if required and loading/unloading the pump and re-coupling the pump with motor on base frame, after checking of the alignment with motor, testing, commissioning with discharge capacity 10000 to 15000 GPH at 185 to 200 meter head and testing complete with satisfaction of Engr-in-Charge. ( Note : Spare parts of pump i.e. ball bearing, mild steel shaft, impeller, diffuser, bush, cast iron keys will be measured and paid separately as supply only if required).
Supply only bronze impeller suitable for 100 HP capacity pump set complete all as specified and directed by Engr-in-charge.
Supply only cast iron diffuser suitable for 100 HP capacity pump set complete all as specified and directed by Engr-in-charge.
Supply only gun metal bush suitable for 100 HP capacity pump set complete all as specified and directed by Engr-in-charge.
Supply only cast iron Keys suitable for 100 HP capacity pump set complete all as specified and directed by Engr-in-charge.
Supply only mild steel shaft suitable for 100 HP capacity pump set complete all as specified and directed by Engr-in-charge.
All as per description of srl item No 66 above but capacity of pump set 25 HP and discharge capacity 15000 GPH at 50 metre head complete all as specified and directed by Engr-in-charge.
Supply only bronze impeller suitable for 25 HP capacity pump set complete all as specified and directed by Engr-in-charge.
Supply only gun metal bush suitable for 25 HP capacity pump setcomplete all as specified and directed by Engr-in-charge.
Supply only cast iron Diffuser suitable for 25 HP capacity pump setcomplete all as specified and directed by Engr-in-charge.
Supply only mild steel shaft of 25 HP capacity pump setcomplete all as specified and directed by Engr-in-charge.
All as per description of srl item No 66 above but capacity of pump set 40 HP to 50 HP and discharge capacity 6000 to 7500 GPH at 200 metre head complete all as specified and directed by Engr-in-charge.
Supply only bronze impeller suitable for 40 HP to 50 HP pump set complete all as specified and directed by Engr-in-charge.
Supply only gun metal bush suitablr for 40 HP to 50 HP pump set complete all as specified and directed by Engr-in-charge.
Supply only cast iron diffuser suitable for 40 HP to 50 HP pump set complete all as specified and directed by Engr-in-charge.
Supply only Mild steel shaft suitablr for 40 HP to 50 HP pump set complete all as specified and directed by Engr-in-charge.
All as per description of srl item No 66 here in before but capacity of pump set upto 25 HP and discharge capacity 3000 to 3200 GPH at 125 metre head complete all as specified and directed by Engr-in-charge.
Supply only Bronze impeller suitable for pump set capacity upto 25 HP complete all as specified and directed by Engr-in-charge.
Supply only cast iron diffuser suitable for pump set of capacity upto 25 HP complete all as specified and directed by Engr-in-charge.
Supply only gun metal bush suitable for pump set of capacity upto 25 HP complete all as specified and directed by Engr-in-charge.
Supply only balancing disc suitable for pump set of capacity upto 25 HPcomplete all as specified and directed by Engr-in-charge.
Supply only mild steel shaft suitable for pump set of capacity upto 25 HP complete all as specified and directed by Engr-in-charge.
Supply only cast iron Keys suitable for pump set of capacity upto 25 HP complete all as specified and directed by Engr-in-charge.
Supply only Roller bearing No NU 305
Supply only Roller bearing No NU 306
Supply only Roller bearing No NU 307
Supply only Roller bearing No NU 308
Supply only Roller bearing No NU 411
S&F for cast iron suction flange suitable for gland packing complete as in repair all as specified and directed by Engr-in-charge.
S&F for cast iron delivery flange suitable for gland packing complete as in repair all as specified and directed by Engr-in-charge.
S&F for cast iron suction bearing cover suitable for all type of pumps sets complete as in repair all as specified and directed by Engr-in-charge.
S&F for cast iron delivery bearing cover suitable for all type of pumps sets complete as in repair all as specified and directed by Engr-in-charge.
S&F for mild steel coupling (pair) with key suitable for 100 HP motor coupled with pump complete as in repair all as specified and directed by Engr-in-charge.
All as per item No 98 here-in-before but 40HP to 75HP complete all as specified and directed by Engr-in-charge.
All as per item No 98 here-in-before but 15HP to 25HP complete all as specified and directed by Engr-in-charge.
S&F for anti vibration pad (ISI marked) for 100 HP capacity pump set 12mm thick complete all as specified and directed by Engr-in-charge.
S&F for anti vibration pad (ISI marked) for 25 HP to 60 HP capacity pump set 12mm thick complete all as specified and directed by Engr-in-charge.
S&F for single phase monitoring relay for over/under voltage and phase failure detection without interrupted neutral monitoring and fast response time of auto/mannual reset facility complete as in repair all as specified and directed by Engr-in-charge.
S&F for three phase monitoring relay for over/under voltage and phase failure detection without interrupted neutral monitoring and fast response time of auto/mannual reset facility complete as in repair all as specified and directed by Engr-in-charge.
S&F for power contactor, AC coil, 3 pole, 415 volts suitable to fixed in fully automatic star detla starter for 100 HP, 3 pole, 180 Amp, Type HGS 130 of Havells make or equivalent of Legrand/Siemens complete as in repair all as specified and directed by Engr-in-charge.
S&F for power contactor, AC coil, 3 pole, 415 volts suitable to fixed in fully automatic star detla starter for 60 HP, 3 pole, 100 Amp, Type HGS 75 of Havells make or equivalent of Legrand/Siemens complete as in repair all as specified and directed by Engr-in-charge.
S&F for power contactor, AC coil, 3 pole, 415 volts suitable to fixed in fully automatic star detla starter for 50 HP, 3 pole, 85 Amp, Type HGS 65 of Havells make or equivalent of Legrand/Siemens complete as in repair all as specified and directed by Engr-in-charge.
Supply, Installation, Connecting electrically, testing and commissioning of fully automatic star delta starter in metal sheet enclosure complete with all pre wired internal connections with all necessary accessories suitable for 75 HP/55KW motor complete as in repair all as specified and directed.
All as per the description of Srl Item No 108 above but capacity of motor 35HP/26KW.
S&F for rubber coupling for connection of pump and motor of Capacity 100 HP complete all as specified and directed
All as per item No 110 above but capacity of 60/50/40 HP pump.
All as per item No 110 above but capacity of 25/15 HP pump.
S&F for star rubber coupling suitable for 15 HP pump
Supply, installation, commissioning and testing of LT Feeder pillar of factory made (CPRI approved), outdoor cubical compartmental type, double door, both side openable with hinged doors & locking arrangement, outgoing cable chamber with same rated aluminium strip from cable chamber to MCCB output, made out of 3.15 mm thick mild steel CRCA sheet supported and fixed on structural frame of angle iron of size 50 x50 x 6mm angle iron frame including painting to all internal & external exposed steel surfaces with powder coating paint (7 stage process) with duly fixed in ground but PCC foundation (1:2:4) type B1, with danger notice plate (02 Nos) of 1.6mm thick mild steel sheet of size 20cmx15cm, vitreous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, suitable for 3 phase 4 wire system 415 volts grade consisting of copper bus bar capacity of 200 Amps with necessary wiring with PVC sheathed stranded copper conductor of 1100 volts of appropriate length size with and including fixing lugs, bolts, screws etc complete and comprising of the following accessories:- INCOMING :- (a) MCCB, 100 Amp, 4 Pole,50 KA - 01 No. (b) Digital Combimeter (7in1) with 4 digit LED Display -01 No (c) Neon Indicating lamp LED type one set in incoming phases(yellow, blue, red)-01set(set of three). OUTGOING:- (a) MCCB, 63 Amp, 4 Pole, 36 KA - 01 No. (b) MCB, SPN, 32 Amp, 10 KA, "c" Series - 02 Nos. (Notes : Make of panel, size and drawing shall be got approved from GE before placing order for procurement and fixing arrangment of star delta starter shall be deemed to be including in the quoted rate).
Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including25x4mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2009) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:2:4 type B-1 as in pit, Precast RCC earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion complete inclulding taking down existing unserviceable earthing all as specified and directed. (Note:-Earth strip and protection pipe upto 7.5mtr is included in the rate quoted)
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
M/S Chib Engineers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .