Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.2 L
Closing Date
9 Jun 2026, 9:30 pm2d left
Bengaluru North City Corporation
Upgradation of Street lighting system by replacing damaged poles, panael boards, control switches and installation of new poles at dark stretches of Dasarahalli Zone ward no 15 to 25.
302062
BNCC/2026-27/EL/WORK_INDENT374
Open
Electrical
BNCC Electrical Division
17 documents required · 17 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Work qualification of The Bidder should have successfully executed similar single work of BBMP/GBA any other equivalent state or central government organizations in India Executing single work of 50 Fifty Percent of Estimate value of this work, involving execution of Providing street lighting/Poles/Cable Electrical works and as proof tenderer shall upload workdone certificate issued by officer not below the rank of Executive Engineer. The minimum workdone amount should not below 133.00 Lakhs.
The Bidder should have successfully executed in BBMP any other equivalent state or central government organizations in India, where 80 Percent of the quantities Must be Supplying and Errection of RCC/MS Poles 450 Nos Should be Supply and Drawing of LTUG/AB Cable of 15.00 KM in any one of the year during last five years 2020-21 to 2024-25 Certificate issued by the officer not below the rank of Executive Engineer shall be uploaded along with the technical bid of the Tender.
The Bidder shall have availability of jeep with ladder for work of maintenance by owning/Hire the required Two jeep with insulated alluminium ladder for Work. The ownership shall be in the name of the individual/ firm. The bidder shall upload the relevant documents along with technical bid OR original documents shall be submitted at the time of agreement. Further, the date of manufacture of vehicle shall be on / after, 1st April 2011.
The Bidder is register with labour department and copy shall be Uploaded in KPP Portal
The Bidder shall register with EPF and ESI, relevant original documents must be uploaded in KPP Portal . If exempted from registering under EPF and ESI for the same an affidavit shall be Uploaded in KPP Portal.The entire relevant original documents shall be produced before executing agreement, failing which the tender shall be rejected.
Annual Turn over certificate issued by charted accountant aolng with ITR minimum of average turnover not less than the Two times the estimated cost under this contract for works between 2021-22 to 2025-26 along with Technical Bid as per the Bid document.Not Less than the Rs.632.00 Lakhs
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity is A X N X 2.5 - B.
Credit lines/ letters of credit/ certificates from the Nationalised Bank must not less than the 30 Percent of the Estimate Cost ie 78.80 lakhs and same should be uploadedas per FD circular dated-FD4PCL-2008 DT-14-10-2008.
The Tenderer shall compulsorily upload the valid and present Certificate copies of VALID ELECTRICAL INSPECTORATE LICENCE
The Tenderer shall compulsorily upload the valid and present Certificate copies of PAN CARD &GST NO
The Bidder shall upload Qualification information as per section 3 and 4 of the Bid document.1.Qualification Information.2.Form of Tender.3.Pre Tender site visit.
The rate/amount quoted by the Bidder is less than the rate/amount put to tender, such bidder shall remit the unbalanced Amount as per the KW4, the unbalanced amount must be paid in the form of FDR/BG/DD and the same scanned copy should be uploaded in procurement Portal. Failure to comply with this condition, the tender shall be rejected.
This work involves scattered activities across the constituency area and is not confined to a single Location or site. The execution of this work requires considerable labour and is not strictly time- bound. Therefore, tenderers, while quoting their bids, shall take these factors into account andagree to comply with this condition. The work shall be carried out strictly as per the directions of the Engineer-in-Charge and the authorized third-party agency. The bidder shall mandatorily upload an undertaking/acceptance of the above condition on their official letterhead, duly signed and sealed, along with the tender documents.
The Bidder shall upload Qualification information as per KW4 of the Bid document.
₹5,000
₹3.2 L
30 May 2026
30 May 2026
10 Jun 2026
4 Jun 2026
2 Jun 2026
Upgradation of Street lighting system by replacing damaged poles, panael boards, control switches and installation of new poles at dark stretches of Dasarahalli Zone ward no 15 to 25.
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 1000 mm Standa...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1500 mm Stand...
Fabricating, supplying and erecting swaged tubular pole of height m having three ections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quali...
Supplying andfixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia 1.5m long .S. Bracket and are welded with suitable angle, using 6mm thick M. S.shee...
Supplying andfixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia 1.5m long .S. Bracket and are welded with suitable angle, using 6mm thick M. S.shee...
Aerial Bunched Cable (ABC) 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 2x16 + 1x25 Sqmm (Insulated Messenger cum Neutral
Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Universal Hook and Bolt & Nut
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Dead End Clamp/Anchor Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Suspension Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Straight Joint Suitable for 16 Sqmm, LT ABC - MJPT Type
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations End Cap for 50/70 Sqmm
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Pole Clamp for HT/LT AB cable
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ tying with binding ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqm...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm,...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm LT Cable.
Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 50/42 mm
Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site Normal soil 5/6'' Bore
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...
Supply and Installation/Fixing/ Provision of Pole box with HRC Fuse /MCB provision and suitable connector/ terminal for 3Ph/1Ph connections with Loop-In&Loop-Out terminals for 10mm 2/25mm 2 3.5 C AI/A...
Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.
PSCC Pole - 9 Mtr Long, 300 Kg WL (Dwg No. ESCOM/GM/ QS&S/55 Dtd 24.11.2018) as per REC Standards
Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8
Cross Arms (MS & GI) as per IS-1977 11 kV, LT 2 Pin Cross Arms - GI
Spiral Earth Electrode
Clamps A Type (MS & GI) as per IS-1977 PSCC Pole (300 Kg WL) Clamp - GI
Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator
Insulator as per IS-1445 for Ceremic, IS-7935 for GI Pin, IEC-61109 for Polymeric 1.1 kV Polymeric Pin Insulator
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...
Supplying and fixing hylum plastic sheet 3mm thick with
necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Document DZ 15 to 19.pdf
Tender Document • 0.97 MB
IFT 01 26-27.pdf
Instructions to Tenderers • 2.27 MB
TS 266.pdf
Others - TS Memo • 1.18 MB
Download all tender documents and submit your bid