REPAIR OF MISC (TP FURNITURE AT FURNITURE YARD OF BSO/GE) AT JAIPUR MILITARY STN

Amount

Taking out unserviceable top from Table and S&F new top made out of 18mm thick MDF board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Fixing the same with the help of necessary screw/ nut bolts all as specified in drg and directed by engineer in charge.

Seat of Chair for junior level (Drg No. FD-170M)

Back of Chair for junior level (Drg No. FD-170M)

Seat of Chair for middle level (Drg No. FD-169M)

Back of Chair for middle level (Drg No. FD-169M)

Seat of Chair for senior level (Drg No. FD-169M)

Back of Chair for senior level (Drg No. FD-169M)

Top of desk for junior level (Drg No. FD-168M)

Top of desk for middle level (Drg No. FD-167M)

Top of desk for senior level (Drg No. FD-166M)

Painting Description (for item No 2.01 to 2.09) : M&L preparation old painted steel surfaces i.e filliing all holes and cracks or detoriated spots of old painted steel furniture with primer then applying two coat of synthetic enamel paint olive green/black/ white/grey (as directed) with spray gun or by manual brush and roller as per requirement in appropriate shade complete including S&F hard rubber shoe where ever required all as specified and directed by engineer in charge.

Chair for junior level (Drg No. FD-170M)

Chair for middle level (Drg No. FD-169M)

Chair for senior level (Drg No. FD-169M)

Desk for junior level (Drg No. FD-168M)

Desk for middle level (Drg No. FD-167M)

Desk for senior level (Drg No. FD-166M)

Chair invalid wheeling non folding (Drg No. HFD-2011)

Patient trolley (Drg No. HFD-2017)

Couch examination steel (Drg No. FD-122)

M&L welding throughout in broken joints of frame and other steel section of chair and desk for junior, middle and senior level etc. Welding at one broken point will be counted as one point. (Drg No. FD-165,255, 1007,1009 & 166M to 170M)

S&F hard PVC Shoe/ring shall be screwed to legs of chair and desk all type and as per drawings. (Drg No. FD-165,255, 1007,1009 & 166M to 170M)

Auditorium Chair ( Description for item 5.01 to 5.04) :- Removing of old unserviceable Leatherette Rexin cloth/tapestry cloth from seat and back of Auditorium Chair and S&F new tapestry cloth duly upholstered/stiched with foam and mesh polyyster fabric (Inner lining cloth) as shown on drawing and directed by GE/Engineer in charge. Note : (i) The rate of tapestry shall be not less than Rs. 350 per meter. (ii) The rate of Leatherette Rexin cloth shall be not less than Rs. 370 per meter. (Model No. 27511 Make-Godrej)

Replacement of Tapestry cloth from seat and back of Chair

Replacement of Leatherette Rexin cloth from handle of Chair

Replacement of Tapestry from side of Auditorium Chair

S&F Tapestry cloth cover duly stiched for neck rest of chair. Size and colour as approved by engineer in charge

Auditorium Chair Arm Rest :- Removing of old unserviceable arm rest from Auditorium Chair and S&F new arm rest as shown on drawing. (Model No. 27511 Make-Godrej)

S&F 25 mm square MS pipe duly painted black and welded to arm rest for supporting. Welding to be done with excellent workman ship and it as directed. Note :- Due care shall be taken while welding work to avoid any welding burnt spots and spills on upholstry. contractor shall liable to replace the entire upholstry and burnt part of chair damaged during welding and painting.

Minor repairing of chair auditorium and S&F necessary parts i.e. Springs, bolts, nuts, screws, fastners, bushes etc to make it completly serviceable.

Auditorium Chair Seatrest Assembly :- S&F in repair seat-rest assembly shall be made up to 15mm thick marine plywood shall be upholstered with foam mesh polyyster fabric and moulded palyurethane foam with interior moulded seat cover, the seat shall be auto tip up type and shall fold when not in use seat size shall be 45.0 cm (w) x 48.5cm (D) x 14.5 cm (T) approx. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location. (Model No. 27511 Make-Godrej)

Auditorium Chair Back rest assembly : S&F in repair back rest assembly shall be made up of 12mm thick marine plywood shall be uphostered with foam mesh polyster fabric and moulded polyurethane foam with interior moulded back cover, the back foam shall be designed with contoured lambal support for extra comfort the back size shall be 47.5 cm (W) x 80.0 cm (H) x 12.5 (T) approx. Note :-Plyurethane foam : The plyurethane foam (palort +isocyanate) shall be maulded with density = 48+2 kgs/m3 and hardness=20+2 on hampden machine at 25% compression. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location. (Model No. 27511 Make-Godrej)

Leg frame assembly & fixing of Auditorium Chairs : S&F in repair frame assembly shall be fabricated from MS flat 40mm x 6mm thick and length 1' ft comforming to IS-15:738 welded with grasing member having foot prit area 286.7mmx767mm made from 6mm flat to framed component having two holes in each foot and fixed by using 10mm long ms expansing ball including necessary drilling growth with epoxy nartal ate complete shall be black powder coated and gratted to the floor all as directed and approved by GE. Note :- The work shall be carried out all as per existing provision and shall be fixed at their original location. (Model No. 27511 Make-Godrej)

Hot Food Trolley:- Removing of unserviceable part of furniture and S&F new part made out of mild steel/SS sheet of 18/16 gauge (as per requirement of drawing) of CRCA quality duly shaped as per drawing and assembling and fixing with other member by screw and point welding as required and directed, including painting of replaced part of steel portion to match with existing. (Drg No. HFD-2066)

S&F new castor wheel of size 200mm dia as shown in drg.

S&F new castor wheel of size 200mm dia with brake as per drg.

Welding of Handle, drawers and other broken section of steel portion. One broken point to be welding will be counted as one unit

Removing of unserviceable heating system with switch and regulator from hot food trolley and S&F new one set of heating system shown as per drg and directed.

Chair invalid wheeling non folding (11.01 to 11.06):- Removing of unserviceable part of furniture and S&F new part made out of mild steel/SS sheet of 18/16 gauge (as per requirement of drawing) of CRCA quality duly shaped as per drawing and assembling and fixing with other member by screw and point welding as required and directed, including painting of replaced part of steel portion to match with existing chair (Drg No. HFD-2011)

Removing of unserviceable seat and S&F seat of size 450mm and back upholstered with polypropyene fabric of approved colour and moulded with polyurethane foam as directed and as shown in drawing.

S&F castores of 200mm swivel type as directed.

S&F puncture proof rubber type of 650 mm dia as directed.

S&F wheels (Rim) fitted with self propelling loops and break arrangementes as directed.

S&F arm rest as shown on drawing.

S&F Aluminium adjustable foot rest as shown on drawing.

Patient trolley :- Removing of unserviceable castores and S&F castores of 200mm swivel type duly shaped as per drawing and assembling and fixing with other member by screw/nut bolts and point welding as required and directed, including painting of replaced part of steel portion to match with existing Patient trolley. (Drg No. HFD-2017)

All as per item No 12.00 but Trolly Four wheel for loading. Drg No. FD-160(M)

Repair to cushioned chairs (13.01 to 13.08) :- Removing of old unserviceable tapestry cloth including foam from seat and back of Chair and S&F new polyurethene foam of 50-55kg/m cube density duly upholstered with tapestry cloth of superior quality and smoothening polishing and painting on wooden and steel portion of the item to match with existing colour as approved by Engineer in charge and fixed as shown on drawing.

All as per item no 13.00 but seat of Chair dining officer's (Drg No. HFD-2030)

All as per item no 13.00 but back of Chair dining officer's (Drg No. HFD-2030)

All as per item no 13.00 but seat of Chair dining steel JCOs/OR (Drg No. HFD-2030)

All as per item no 13.00 but back of Chair dining steel JCOs/OR (Drg No. HFD-2030)

All as per item No.13.00 but seat and handle of Chair Easy (Drg No. HFD-2034)

All as per item No 13.00 but back of Chair Easy (Drg No. HFD-2034)

All as per item 13.00 but seat of Chair visitor geeken (Drg No. TP)

All as per item 13.00 but back of Chair visitor geeken (Drg No. TP)

Repair to Couch Examination (14.01 to 14.03):- (Drg No. FD-122)

Replacement of foam sheet 1800 x 900 mm 40 density alongwith cotton layer, hession and cotton cloth duly upholstered with leatherite of best quality and approved shade by engineer-in-charge. Total height of the cushion sheet alongwith springs,foam, cotton layer and cloth hessian must be 150 mm and all as specified in drg.

Replacement of Copper plated steel springs of 100 mm dia and 10 gauge wire existing sizes.

S&F new hard rubber shoe

Repair description for Chair dining PVC (15.01 to 15.04):- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. (Drg No. FD/MAP-II/05)

Rear legs

Front legs

Front Side/rear/back rail

Side/Center stiffener

S&F seat for chair dinning size as per drg of 3mm thick weight not less than 0.39 kg Make - AMKO/COMFO best quality approved by GE and as directed. (Drg No FD/MAP-II/05)

M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing of Chair dinning.

Schedule of Credit

AJAY TRADERS

UNIVERSAL INFRAPROJECT PVT LTD