RECONSTRUCTION OF FACTORY II BUILDING INCLUDING DEMOLITION OF BUILDING NO 122 AND 324 AT NAD KARANJA

Amount

SCHEDULE- "A" Part - I (BUILDINGS & STRUCTURES) Total of Sch-'A' Part-I B/F from Serial Page No. 28(R)

SCHEDULE- "A" PART-II (SITE CLEARANCE, EXCAVATION & EARTHWORK) Total of Sch-'A' Part-II C/o B/F from Serial Page No. 29

SCHEDULE- "A" PART-III (DEMOLITION / DISMANTLING) Total of Sch-'A' Part-III B/F from Serial Page No. 32(R)

SCHEDULE- "A" PART-IV (INTERNAL WATER SUPPLY) Total of Sch-'A' Part-IV B/F from Serial Page No. 33

SCHEDULE- "A" PART-V (INTERNAL ELECTRIFICATION) Total of Sch-'A' Part-V B/F from Serial Page No. 39

SCHEDULE- "A" PART- VI (ROADS / PATHS / CULVERT) Total of Sch-'A' Part-VI B/F from Serial Page No. 42(R)

SCHEDULE- "A" PART-VII (SEWAGE DISPOSAL) Total of Sch-'A' Part-VII B/F from Serial Page No. 44(R)

SCHEDULE- "A" PART-VIII (AREA DRAINAGE) Total of Sch-'A' Part-VIII B/F from Serial Page No. 45

SCHEDULE- "A" PART-IX (RETAINING WALL) Total of Sch-'A' Part-IX B/F from Serial Page No. 46

SCHEDULE- "A" PART-X (EXTERNAL ELECTRIFICATION) Total of Sch-'A' Part-X B/F from Serial Page No. 49

SCHEDULE- "A" PART-XI (EXTERNAL WATER SUPPLY) Total of Sch-'A' Part-XI B/F from Serial Page No. 50

SCHEDULE- "A" PART-XII (DG SET) Total of Sch-'A' Part-XII B/F from Serial Page No. 51(R)

SCHEDULE- "A" PART-XIII (FIRE ALARM DETECTION SYSTEM) Total of Sch-'A' Part-XIII B/F from Serial Page No. 53

SCHEDULE- "A" PART-XIV (WATER COOLER) Total of Sch-'A' Part-XIV B/F from Serial Page No. 54

SCHEDULE- "A" PART-XV (TELEPHONE CONDUITS) Total of Sch-'A' Part-XV B/F from Serial Page No. 55

SCHEDULE- "A" PART -XVI (MISCELLANIOUS ITEMS)

INTERNAL WATER SUPPLY

S&F Angular stop cock 15 mm dia, quarter turn Make - Jaquar Model No CQT-23059 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

S&F for concealed stop cock, Regular body with adjustable wall flange, size 20mm dia, Make - Jaquar Model No CQT-23089 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

S&F Sink cock with swinging casted round shape spout (Wall mounted model) 20 mm dia, quarter turn Make - Jaquar Model No CQT-23347 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

S&F Chromium Plated Push cock for urinal 15mm DIA. Bore Make- Jaguar Model No. PRS-073 or equivalent in Crab Tree/Kohler complete all as specified and directed by Engineer-in-Charge.

S& F Overhead shower rose 80mm dia. Of ABS body chromium plated for fixing shower arm 15 mm size with bend of 45 degree with flange Make - Jaguar model OHS 1985 or equivalent in Crab Tree/Kohler complete all as specified and directed by Engineer-in-Charge.

S&F two way bib cock 15 mm dia. Make - Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

S&F Bib taps Fancy type chromium plated 15mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Make - Jaquar Model No CQT-23047 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

S&F Health faucet (ABS body) with 01 meter long PVC tube & wall hook. Make - Jaquar Model No ALD-CHR- 583 or equivalent in Crab Tree/Kohler brand complete all as specified and directed by Engineer-in-Charge.

INTERNAL ELECTRIFICATION

S & F of 4' batten light suitable for surface / suspended mounting with steel housing, polycarbonate lens & optical cover, LED light having beam angle of light source 120˚, initial luminous flux 4000 lm, luminous efficacy not less than 100 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, surge protection level until 4 kV, power factor not less than 0.95 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips BN308C LED40S-6500 L120 PSU WH or equivalent model of Havells, Wipro, Bajaj

S & F of square shape fully diffused recessed mounted 2' X 2' LED luminaire with, metallic CRCA housing & powder coated body, initial luminous flux 3600 lm, luminous efficacy not less than 110 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, power factor not less than 0.90 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips RC380B LED 36S-6500 G4 L60 W60 PSU OD or equivalent model of Havells, Wipro, Bajaj

S & F of square shape fully diffused surface mounted 2' X 2' LED luminaire with, metallic CRCA housing & powder coated body, initial luminous flux 3600 lm, luminous efficacy not less than 110 lm/W, initial CCT 6500 K, initial CRI greater than 80, initial chromaticity <5, L70B50 50000 hr, IP 20 and IK 02 protection, power factor not less than 0.90 and built-in driver conforming to IS 15885 (Part 2/Sec 13): 2012 complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size from ceiling rose to the light fitting as specified and directed by engineer-in-charge. Make: Philips RC380B G4 or equivalent model of Havells, Wipro, Bajaj

S & F 45 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Make: BAJAJ Cat-Part No. BAJAJ 169799 BRTFG 45W LED I or equivalent model of Havells, Philips or Wipro

S & F of Energy saving, environment friendly & robust highbay LED luminaire Saucer type with high efficacy suitable for ceiling Surface / Suspended 150 watt fitting complete Cat No.RADIOSOHB150WLED75760DBOPC of Make: Havells / BY415P LED145S CW WB FG PSU GR S2 of Make: Philips or equivalent as specified and directed by engineer-in-charge.

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 200 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size complete with electrical connection through 3 core PVC insulated copper conductor unarmoured cable of suitable size as specified and directed by engineer-in-charge. Make: Havells, Bajaj, Crompton, Usha

S & F engery efficient metallic exhaust fan (heavy duty) having blade sweep 300 mm, air delivery not less than 850 CMH, suitable for 220-240 V, 50 Hz, 1-Ph AC supply, including electrical connection with 3 core flexible Cu conductor cable of appropriate size to the exhaust fan complete all as specified and directed by engineer-in-charge. Make: Crompton, Usha, Bajaj

S & F Industrial Heli fan of 24 feet dia 5 Nos blade with heavy duty motor of capacity 1.5 KW 50 RPM operating on 415 volts 3 phase AC supply 50 Hz suitable for area coverage of 30000 sqfeet with noise level of 60 db complete including necessary fixing arrangement in hanger all as specified and directed. Make : Auster Technology / Kelley / Ecoair Cooling Systems Pvt. Ltd

S & F vertical triple pole & neutral DB 4 way double door, metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for MCCB up to 250 A as incomer and SP/TP MCBs as outgoing, reversible metal door, fully insulated 250 A copper busbar for each phase, two fully insulated & shrouded neutral bars, two earthbars, cable ties for cable management, prefitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. Make: Legrand Ekinox³ or equivalent model of Schneider, Siemens or ABB

S & F 100 A, 415 V, 16 kA, 50 Hz FP MCCB (moulded case circuit breaker) in single frame size up to 250 A with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 1.5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% Icu as per IEC 60947-2 complete all as specified and directed by engineer-in-charge. Make:Legrand, Schneider, Siemens, ABB

S & F Isolator for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete as specified and directed by engineer-in-charge of following capacities : Make:Legrand, Schneider, Siemens, ABB

a) 100 A, 415 V, 50 Hz TPN

b) 63 A, 415 V, 50 Hz TPN

c) 40 A, 415 V, 50 Hz SPN

S & F MCB for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete as specified and directed by engineer-in-charge of following capacities : Make:Legrand, Schneider, Siemens, ABB

a) 6- 32 A, 230 V, 50 Hz SP MCB (c- curve)

b) 20 A, 230 V, 50 Hz SPN MCB (c- curve)

c) 32 A, 230 V, 50 Hz TP MCB (c- curve)

d) 40 A, 230 V, 50 Hz TPN MCB (c- curve)

S & F Air circulator fan, wall mounted, air flow regulation type, 3 speed 750 mm sweep, 90 degree oscillation for wide coverage, 230 volts, single phase, 250 watt power consumption thermal, protected type efficient motor, 1440 RPM, Aero dynamically designed blades for air delivered 150 cubic meter per minute & minimum noise level, 245 minimum peak velocity, three blades, vertically adjustment facility from 22 to 45 degree including with double ball bearing ZZ type, metallic high luster finish with chrome plated pipe, Heavy duty gear box, study close – mesh guards with powder coating to ensure corrosion resistance as per safety standards conforming to IS : 2997-1964 complete as specified and directed by engineer-in-charge. Make : Bajaj or equivalent Model : Supreme plus

SEWAGE DISPOSAL

RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil including removal of soil upto 50 m, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users all as specified and directed by Engineer-in-Charge. Drg No. TD/2007/10 Sheet No. 1/4 to 4/4

Soakage wells, excavation in any type of soil including removal of soil upto 50 m, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 M dia X 4.5 M effective depth all as specified and directed by Engineer-in-Charge. Drg No. WD/2007/01(A) Sheet No. 1/1

EXTERNAL ELECTRIFICATION

Supply and fix Incoming MCCB 630 Amps, 4 pole, 415 Volts AC having rupturing capacity 50 KA with MCCB Enclosure solid netural link for 4 Pole MCCB. (Near Existing panel at Sub Stn) complete all as specified and directed by Engineer-in-Charge.

Supply, install and commissioning of factory made vermin proof LT panel outdoor cubical, self supported, CPRI Approved make, front and rear openable, double door hinged type with locking arrangement and slopping top canopy, suitable protection with dust and vermin proof etc, fabricated out of 3.15 mm thick CRCA sheet duly powder coated with 7 tank chemical process, mounted fixed on and included MS angle section 50 x 50 x 6 mm on PCC 1:2:4 type B-1, plateform 60 CM above the ground level and 45 CM below the ground level, factory fabricated with front and back openable double door system with and lock openable by keys, having chromium plated 19 mm dia fancy lock, louvers and air vent, gasket including following complete all as specified and directed by Engineer-in-Charge. a) Copper bus bar 400 Amps cap 4 wire fixed on insulator not less than 1.0 mtr long bus bar - 1 set b) Incoming MCCB 250 Amps, 4 pole, 415 Volts AC having rupturing capacity 50 KA - 01No (For Incoming ) c) Outgoing MCCB 40 Amp 3 pole 25 KA with thermal magnetic release - 1 No for capacitor bank for machine (06 Nos)

EXTERNAL WATER SUPPLY

Cutting the existing water supply GI pipe line 80 mm dia and taking branch connection of 50 mm dia pipe by inserting Tee complete all as specified and directed by Engineer-in-Charge.

M & L for Construction of brick masonary valve pit of size 900 mm X 900 mm X 900 mm (internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate, 150 mm thick & 150 mm wide offsets around over 100 mm thick hardcore , 200 mm thick fly-ash brick masonry walls built in CM 1:6, 100 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in any type of soil 6 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed.

FIRE DETECTION ALARM SYSTEM

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sqmm, 2 core, 1100 volts grade complete all as specified and directed by Engineer-in-Charge.

Supplying and installing /Fixing of ISI mark fire extinguisher mechanical foam (AFFF) type of capacity 9 Ltrs manufactured out of CRCA plates of IS:513 grade conforming to IS :10204 and approved by TAC, body coated with lead and tin alloy, having anti-corrossive treatment internally and externally by electrolytic deposition process, body tested at 25 Kg F/Cm, fire red epoxy polyster powder coated comprising of AFFF in concentration of 6% and CO2 gas catridge jet range up to 6 mtr, suitable for 'B' class fire (Such as petrol, oils, fats, paints, organic solvents etc). Complete in all respect and as per IS :2190 and all as specified and directed. MAKE:- Ceas fire/Fire age/New Tech

Supply, installing, of ISI marked ABC stored pressure type fire extinguisher, capacity 4.5 Kg , portable type consisting of mild steel body as per IS :513, mild steel neck ring as per IS: 2052, brass valve, body test pressure upto 30 Kg F/Cm2 , anti-corrosive treatment by epoxy polyster coating of 50 micron, jet length 2 mtr , jet range minimum 6 mtr minimum dicharge 85 Ltrs/Minutes expelling agent dry nitrogen conforming to IS:13849 suitable for B and E class fire complete in all respect and all as specified and directed. Make:- Hindusthan Fire protection/Ceas fire/New tech.

Installing , of ISI marked Carbon dioxide type (CO2) fire extinguisher, capacity 4.5 Kg , portable type consisting of mild steel body as per IS :513, mild steel neck ring as per IS: 2052, body test pressure upto 250 Kg /Cm2 , anti-corrosive treatment by epoxy polyster coating of 50 micron, jet range minimum 2.5 to 3 mtr , working pressure 60-65 kg / cm2 conforming to IS:2078 suitable for B and C class fire complete in all respect and all as specified and directed. Make:- Hindusthan Fire protection/Ceas fire/New tech.

DG SET

Supplying, installing, testing and commissioning of factory assembled Diesel Engine driven generating set coupled with alternator AC to give continuous output of 160kVA at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50HZ, 1500 RPM, directly coupled with diesel engine water cooled, mounted on common base frame complete with in built fuel tank (service tank) of 370 litres capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, micro processed based relay panel for automatic starting on mains failure, control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and conforming to the technical specifications laid in particular specification clause No. 34 complete in all respect and all as specified and as directed Location: Near sub-station Make: comprising of " Cummins" Model QSB 5.9 G2 or equivqlent in Kirloskar, Crompton Greaves, Ashok Leyland, Diesel Engine developing 206 BHP at 1500 RPM, Complete with standard accessories . Coupled to " Stamford / Kirloskar / Crompton Greaves" (a) Any civil work reqd for installation of DG set & AMF panel at site shall be deemed to be including in to quoted rates (b) Contractor shall submit the detailed specification, particular model, make and literature alongwith drawing for approval of Accepting officer before placing of order the GE and Engineer-in-charge shall ensure that the detailed drawing & specifications shall be submitted to accepting officer with in one month of issue of Work order (c) The width (Internal depth) of LT/AMF Panel should not be less than 450mm.

WATER COOLER

Supply, install, testing and commissioning of voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of '+' or '-' 2.5% with low and high voltage cutoff and of capacity 2 KVA complete all as specified and directed by Engineer-in-Charge.

TELEPHONE CONDUITS

M&L for 2 pair un-armoured high conductivity solid annealed bare copper conductor of size 0.5 mm telephone cable with high density polythene insulation paired polyster taped and retardant PVC compound grey outer sheathed confirming to ITD/S/SW 113C all as specified and directed.

Supply and fixing Telephone socket outlet with shutter RJ11-1 module ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fix, Telephone Junction box foxed key style secured lock, easy to open door of plastic size 9.5 X 7.5 X 3.5 inches complete all as specified and directed by Engineer-in-Charge. Type: 50 P / 60 P / 80 P.

Supply & fix, for Metal flush mounting box-1 Module complete all as specified and directed by Engineer-in-Charge. (Model No: 6890 07 of LEGRAND / HAVELLS / ANCHOR).

Supply & fix, for Modular Pearl white cover plates 1 Module complete all as specified and directed by Engineer-in-Charge. Model No: (6763 60 LEGRAND / HAVELLS / ANCHOR).

MC Gandhi and Sons

Mukund Enterprises Private Limited

Nexus Infratech

DAS Offshore Engg. Pvt. Ltd.

B D Raizada Projects Pvt Ltd

Hariom Projects Pvt Ltd