Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹43.8 L
EMD Value
₹43,821
Closing Date
3 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Air Conditioning Work for GP25-2 Building at HAL Lucknow.
7405
HAL-ADL/CWA-23AC/3/1
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹1,120
₹43,821
3 Jun 2024
13 May 2024
13 May 2024
3 Jun 2024
Submission of Tender Cost (Scan Copy & Original both, Refer Section-3). Particulars of Tender Cost i) Demand Draft /Bankers Cheque No/Transaction No ii) Date iii) Name of Bank iv) Address of Bank v) Validity of DD/Bankers Cheque
Submission of EMD (Scan Copy & Original both, Refer Section-3). Particulars of EMD i) Demand Draft /Bankers Cheque No/Transaction No ii) Date iii) Name of Bank iv) Address of Bank v) Validity of DD/Bankers Cheque
Bid Submission Form (Refer Section-2) (Please upload in pdf)
Submission of Documents as detailed below:
Authorization Letter/Power of Attorney (IF APPLICABLE) (Please upload copy in pdf)
Proof of Valid Legal Entity. (Ref: Section -3) (Please upload copy in pdf)
PAN Copy (Ref: Section -3) (Please indicate PAN Number & upload PAN copy in pdf )
GSTIN Registraion Copy. (Ref: Section -3) (Please indicate Goods and Services Tax Registration no & upload copy in pdf)
Copy of EPFO Registration (Ref: Section -3)(if available) (Please indicate registration no. & upload copy in pdf)
Copy of ESIC Registartion (Ref: Section -3) (Please indicate registration no. & upload copy in pdf)
Proof of Annual Turnover of Last 3 Years-Profit Loss Account & Balance Sheet (Ref: Section -3). (Please upload copy in pdf)
Latest & Valid Solvency Certificate (within the period of 12 Months from the final date of submission of tender) (Ref: Section -3) (Please upload copy in pdf).
Self declaration containing details of communication facilities (Ref: Section -3). (Please indicate e-mail ID, Name & Designation of Contact Person, Mobile No/Landline No)
Proof of experience and Proof of Work in-hand (Ref: Section -3) (Please upload in 'pdf' format)
Compliance to read and understand the Requirement & Scope of Work of the contract. (Refer Section-4 and Section-5)
Undertaking by competent authority (It is desirable to upload signed copy in pdf format)
An undertaking by the party to the effect that he is not debarred or blacklisted by any Govt. Organization /Govt. Undertaking
Undertaking from Bidder that no conditions are imposed in their price bid.
Acceptance to Complete Tender Requirement, Scope of Work, Terms & Conditions mentioned in the bidding document are properly understood and undertaking to comply with them.
Please confirm that your offer is in conformity with tender documents, wherever your offer is silent.
The rates quoted are valid and binding upon the bidder for the entire period of contract and it is certified that the rates quoted are the lowest rates as quoted in any other institution in India under same Terms and conditions as notified in present tender.
I/We give the rights to the competent authority of the Hindustan Aeronautics Limited to forfeit the Earnest Money/Security money deposit by me/us in case of breach of conditions of Tender/Contract.
I/We hereby undertake to provide services as per the directions given in the tender document/contract agreement.
I/We hereby confirm that all information/attachment/data etc. submitted with the offer are true and correct. I/We will be solely responsible for authenticity of submitted documents/data. In case at any stage, it is found that false declaration has been made suitable action as per norms can be initiated against us.
HAL-ADL/CWA-23AC/3/1
Description
Installation
Supply, Installation, Testing and Commissioning of AHU of 6000 CFM for Class 100000 Sheet metal sectionalized cabinet type air handling unit in double skin construction fabricated from Al extruded section frame structure. The enclosure shall be with thermal break profile. The inner skin shall be 0.6 mm Plain GI & outer skin 0.6 mm pre coated GI construction with 48mm +/- 2 mm thick PUF insulation and complete with following section. Mixing Chamber Pre-filter section with washable type Pre filters (10 Micron & 90 % Efficiency) EU4 Coil section with 6 rows deep chilled water coil in copper tube of 0.41mm thick and AL fins 11-13 FPI. Blower (DIDW backward curved fan with 125 mm static pressure) section with Blower and motor. Both Motor and Blower are mounted on common base frame. Microvee filter section with Micro fine filters (5 Micron & 95% Efficiency) as per airflow diagram. EU7 HEPA filters section with hepa filters of efficiency 99.97% down to 0.3 Microns. EU13 Fresh air Module With S.S. bird screen, volume control damper and 10 Micron Filter (90% Efficiency) Exhaust air Module With S.S. bird screen, volume control damper and 10 Micron Filter (90% Efficiency) Sandwich type insulated drain pan. Drain pan should be 18 G SS 304 construction Mixing chamber should be of minimum 500 mm Pre-filter section should be of Minimum 200 mm for 50mm Thick filter size (for higher filter thickness, difference in thickness will be added in pre-filter section.) Coil section should be of minimum 500 mm or suitable coil size requirement. Blower section length should be as per standard dimension of the blower required to be installed in the blower housing. There should be access door across every section of AHU. There should be opening for cable entries in AHU for blower section & in mixing chamber section for sensors. The air handling units should have aluminum aero-foil blade volume control dampers at supply, return, fresh air & exhaust air. Concrete blocks for AHU installation in supplier's scope.
Supply, erection & commissioning of MS 'C' class chilled water piping with elbows, tee, reducer, flanges etc. and supports such as clamps, anti-vibration hangers etc of following sizes. Making openings in wall and their finishing after piping work is in supplier's scope.
Supply and installation of TF quality 50mm thick thermocol insulation on Chilled water pipe line, elbow, tee, reducer, flanges, valves etc covered with wire mesh, sand & cement plaster.
Supply & installation of following sizes Y strainer with flanges, nut bolts and gasket.
Supply & installation of following sizes PN16 hand lever type Aqua-seal Butterfly valve in the inlet/outlet & bypass of chilled water line with flanges, nut bolts and gasket.
Supply and fixing of 4" dia Water Pressure Gauge with Siphon & fittings of range 0-7 Kg/cm2
Supply and fixing of 1/2" dia or 3/4"dia Industrial Thermometer with fittings of range 0-50 deg C,
Drain Piping
32 mm dia
DUCTING (Factory Fabricated, Site Fabricated) Making openings in wall and their finishing after ducting work is in supplier's scope.
Supply of factory fabricated ducting, installation and testing of galvanized sheet metal ducts fire retardant gaskets, slip on flanges, GI fully threaded rods, supports etc. in accordance with the approved shop drawings.
Supply, fabrication, installation and testing of site fabricated GSS ducts in accordance with approved shop drawings. The ducting shall include bends, tees, elbows, Y piece, taper pieces, turning vanes, reducer, expander, blind flanges etc.
SITC of Site/Factory fabricated AL sheet Riser ducting RTV seal angle flanges etc. in accordance with the approved shop drawings.
Supply and fixing of duct accoustic lining insulation 25mm thick fire glass CR-200 covered with RP tissue paper, 28G Aluminium perforated sheet fixed with screw etc. complete in all respect. Make: U.P. Twiga/Owen corning/ Kimco or equivalent.
Supply air duct insulation with 19 mm thick Al. foil faced nitrile rubber foam/XLPE foam with factory laminated aluminum foil. Return air duct insulation with 13 mm Thick nitrile rubber/XLPE foam with factory laminated aluminum foil. Joints shall be sealed with aluminum foil tape. The insulated ducts shall be finally covered with single layer of chicken mesh tightly wound around the insulated ducting.
Insulation of supply air ducts with supply of insulation material (19mm)
Insulation of return air ducts with supply of insulation material (13mm)
Supply Air AL. powder coated diffuser with MS black painted damper
Return Al powder coated Air Grill without damper
Duct damper & volume control damper in GI/AL construction with food grade gasket
Fusible linked fire dampers in SA ducts. Fire dampers shall be as per UL-555 specifications including temperature/time rating along with fusible link.
Supply, Installation and Testing of 125 mm deep Antivibration Flexible Canvas Joints made out of fire retardant fabric with extruded aluminium frame/ flange on both sides.
SITC of Strip Heater Bank (3KW each)
SITC of following dia 3 way modulating valve for AHU with actuator & all accessories.
Supply, Installation, testing and commissioning of Package AC. Supply, installation, testing & commissioning of twin circuit 11 TR Air-cooled Package units including refrigerant (eco-friendly) Scroll compressor inbuilt in package AC
Supply and Installation of hard drawn copper pipe. Refrigerating hard copper piping between indoor and outdoor unit complete work like elbow socket gas welding, Nitrogen testing, suitable pipe supports etc.
Copper Pipe (Liquid)
Copper Pipe (Gas)
Supply, Installation of Out Door Stand. Condenser frame structurally angle of suitable size for outdoor units made of structural MS and painted with one coat of primer and two coats of synthetic enamel paint of color same as that of condenser unit.
Supply, Installation of Indoor Stand. Indoor unit stand frame structurally M.S C Channel of suitable size indoor units make of structural steel and painted with one coat of primer and two coats of synthetic enamel paint of colour same as that of indoor unit.
Supply, fixing, laying & testing of XLPE AL. armoured power cables for AC plant , AHU, Pacage AC etc. complete with cable ties, clamps etc.
4 core x 25 sqmm
4 core x 10 sqmm
Supply, fixing, laying & testing of Copper flexible control ables for AC plant & AHU power circuits complete with cable ties, clamps etc
4 core x 1.5 sqmm
Supply & installation of elctrical starter panels complete with suitable incomer, & outgoing to run AHU motor with digital metering like Ameter & voltmeter, indicators, Push button, overload protection relay & other electrical safeties and potential free contacts for AHU limit switch & light controlling.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TenderDocument.pdf
TENDER_DOCUMENT • 0.14 MB
NIT.pdf
TENDER_DOCUMENT • 0.02 MB
Technicalbid.xlsm
TENDER_DOCUMENT • 0.01 MB
Price_Bid.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .