REPAIR/ MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING WIRING, LIGHTNING FIXTURES, CEILING/EXHAUST FANS, WALL MOUNTED/ PEDESTAL FANS INCLUDING ATTENDING DAY TO DAY COMPLAINTS AT DRDL/ASL AREA UNDER GE(I) RND KANCHANBAGH, HYDERABAD

Amount

Repair / maintenance of internal/Building light fittings of any type like tube lights / wall bracket light fittings / ceiling lights / mirror lights/ high& Medium bay lights in its position, testing all the components / parts, wiring etc, identifying and replacing the defective components like, tube rod, side holders, holders, lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like, capacitor, lamp holder, connector, connection wire,LED tube, Bulbs etc, replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M.

(iv) The contractor has to rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 50/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall engage separate team of technicians / repairer for SPRITE/ASL, DRDL and NGARM areas. (v) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced on each and every light fitting and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below. (vii) The contractor should submit the copy of qulaification,Experience as Electrician and police verification certificates while sigining the site orders. (viii) The contractor is fully responsible for providing the safety standards to be maintained by the electricians while attending the electrical defects.

Supply only following spares for light fittings for replacement :-

LED tube 20Watt, 6500K CCT,proffesional luminaries with luminous efficiency not less than 120Lm/watt, Single side connection with < 10% THD. Make: Havells Cat part: PHOTONULTRAE2.01213T8SSTL20WLED865SPC or Philips/ Wipro

Universal batten/Channel for T8 LED lamps single side connection. Make:Havells cat part No. LUMILINE+BS20WLED865SPCSS or equivalent of Wipro/Philips

PVC / polycarbonate Angle/Batten type lamp holders retrofit type. Make: Anchor/GM/Cona

S&F in replacement for white cover plate with frame 8 module.

S&F in replacement for white cover plate with frame 6 module.

S&F in replacement for white cover plate with frame 4 module.

S&F in replacement for white cover plate with frame 3 module.

S&F in replacement for Modular socket 6A 2/3 Pin 2 module.

S&F in replacement for Modular socket 16A 2/3 Pin 2 Module.

S&F in replacement for modular switch 1 way 6A 1 module.

S&F in replacement for modular switch 1 way 16A 1 module.

S&F in replacement of modular fan regulator 120W,240V, 2module, suitable for ceiling fan of 1200/1400mm sweep.

S&F in replacement of modular fan regulator 120W,240V, 4module, suitable for ceiling fan of 1200/1400mm sweep.

S&F in replacement for modular switch 2 way 6A 1 module.

S & F in replacement of switch piano flush type 5 Amps SP one way all as specified.

S & F in replacement of switch piano flush type 15 Amps SP one way all as specified.

S&F in replacement of fan regulator 120W,240V, switch type suitable for ceiling fan of 1200/1400mm sweep.

S&F in replacement of fan regulator 120W,240V, socket type suitable for ceiling fan of 1200/1400mm sweep.

S & F in replacement of switch socket combination 5 Amps flush mounted 3/5 pin multi purpose all as specified.

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

Material and Labour for sub main wiring with 2 runs of 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 Volts grade multistranded with copper conductor drawn through and including non metallic rigid PVC conduit ISI marked 25 mm dia including conduit accessories concealed/surface type on walls, roof, floors etc including one run of 2.5 Sqmm PVC copper conductor as earth continuity wire including taking down unserviceable sub main wiring including conduit all as specified and directed. Note : 2 Runs of 2.5 sqmm cable 1 run of 2.5 sqmm cable and 1 run of PVC conduit shall be measured as one unit.

All as per srl item No. 23 here-in-before but with 2 runs 4 sqmm including 1 run of 4 sqmm PVC copper conductor FRLS cable as earth continuity wire in not less than 25mm dia ISI marked PVC conduit.. Note : 2 Runs of 4 sqmm cable 1 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment.

All as per srl item No. 23 here-in-before but with 2 runs 6 sqmm including 1 run of 6 sqmm PVC copper conductor FRLS cable as earth continuity wire in not less than 25mm dia PVC conduit. Note : 2 Runs of 6 sqmm cable 1 run of 6 sqmm cable and 1 run of PVC conduit shall measured as one unit for the purpose of payment.

All as per srl item No. 23 here-in-before, but sub main wiring with 4 runs of 4sqmm with 2 run of 4 sqmm copper conductor FRLS as earth continuity wire in not less than 25mm dia PVC conduit. Note : 4 Runs of 4 sqmm cable 2 run of 4 sqmm cable and 1 run of PVC conduit shall be measured as one unit for the purpose of payment.

Material and Labour for sub main wiring with 4 runs of 6 Sqmm single core ISI marked PVC insulated unsheathed cable 1100 Volts grade multistranded copper conductor cable drawn through in and including surface/concealed rigid PVC conduit medium grade of size not less than 25mm dia and conduit accessories such as bends, tees, junction boxes type on walls, roof, floors etc.. including providing 2 runs of 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor and connecting to earth dolly wire including taking down unserviceable sub main wiring and conduit all as specified and directed. Note :- 4 Runs of 6 sqmm cable 2 run of 6 sqmm cable and 1 run of PVC conduit shall measured as one unit for the purpose of payment including taking dow unserviceable sub main wiring including conduit all as directed.

Supply and fix in replacement MCB DB 08 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed .

Supply and fix in replacement MCB DB 04 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed .

Supply and fix in replacement MCB DB 12 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed.

Supply and fix in replacement VTPN DB 04 way (double door) sheet metal enclosure factory made suitable for MCCB 415 volts incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed.

Supply and fix in replacement MCB TPN DB 04 way (double door) sheet metal enclosure factory made suitable for MCB TPN incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed.

Supply and fix in replacement VTPN DB 08 way (double door) sheet metal enclosure factory made suitable for MCCB 415 volts incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed.

Supply and fix in replacement VTPN DB 12 way (double door) sheet metal enclosure factory made suitable for MCCB 415 volts incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed.

S&F in replacmenet MCCB with rating of 100Amps,415Volts 4pole with 25kA breaking capacity,thermal magnetic adjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be 100% of ultimate breaking capcity(Icu) with inbuilt Display for Current Metering with accuracy of class 1. MCCB should be with suitable spreaders and phase barriers for each terminals with all accessories all as specified and directed.

All As per item No :35 above but 160Amps, 4 pole, 25KA.

S&F in replacmenet MCCB with rating of 63Amps,415Volts 4pole with 25kA breaking capacity,thermal magnetic adjustable of overload & fixed short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be 100% of ultimate breaking capcity(Icu) . MCCB should be with suitable spreaders and phase barriers for each terminals with all accessories all as specified and directed.

All As per item No :37 above but 125Amps, 4 pole, 25KA.

Taking down old unserviceable point wiring (Light, Fan, Socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good to the disturbed surfaces of walls,ceilings and floor etc complete all as directed

Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, concealed/surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clamps etc including PVC gang boxes as required at site for concealed/surface conduit wiring and modular plates & covers as required at site for housing switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated multistranded unsheathed FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for and connecting up complete for the following:-

One light/ fan point controlled by one, one way switch

One light point controlled by one, two way switch

One 5 Amps socket point on independent board.

One 5 Amps socket point on same board with other switches

All as per item No. 40 here-in-before but wiring with 4.00 Sqmm FRLS for 15 Amps switch socket combination on independent board/two pin earth plug and socket including providing 4 Sqmm PVC insulated multi stranded unsheathed FRLS copper earth continuity conductor and connected to common earth dolly.

S&F point wiring for one light/fan/bell /5amp socket outlet same board/5amp socket outlet independant board point, controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100 volts grade, single core (multistrand) copper conductor (FRLS) cable drawn into & including existing conduit and terminal boxes and matching the same with existing surface for mounting fittings like switches, sockets & fan regulators etc with 3mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 sqmm multistranded FRLS copper conductor cable earth wire and connected to earth dolly complete all as specified and directed, are as follows :-

One light /one fan/one bell point controlled by one switch.

One socket outlet 5 pin 5 amps controlled by one switch on same board.

One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item No. 41 here-in-before but wiring with 4.00 Sqmm for 15 Amps switch socket combination on independent board/two pin earth plug and socket including providing 4 Sqmm PVC insulated multi stranded unsheathed copper earth continuity conductor and connected to common earth dolly. NOTE : The Contractor is responisible for arranging all tools required at site.

M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC conduit 20mm ISI marked inclusive all accessories complete as specified and directed.

S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body.

S& F in replacement surface mounting Plastic gang boxes suitable for modular switches 3/4 module.

Taking down ceiling fan/exhaust fan/ wall mounted fan / Air circulator fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1. Cost of spares such as capacitors, bearings, Shaft etc will be measured and paid for separately under respective Item of sch A as supply only.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. Make: Epcos/Havells/Tibcon

Supply only capacitor of 4 mfd for air circulator/exhaust fan. Make: Epcos/Havells/ Tibcon

Supply only alluminium fan blade for exhuast fan of any sweep/make as per the sample given by the site-in-charge.

Supply only bearing No.6201/6202/6203/6204 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan. Make: SKF/TATA/ARB

Supply only carbon steel shaft as suitable for ceiling fan/Exhuast fan/ Pedestal Fan/ Air Circulator fans matching to the existing size.

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor and cleaning the stator completly removing the burnt sludges from the slots and rewinding with super enameled copper winding wire of suitable gauge or of matching size to the exisiting wires with same turns ratio including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed by Engineer-in-charge.

Celling fan of size 1200/1400mm sweep.

Air circulator fans size 600 mm sweep wall mounting Oscillating type

Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating.

Exhaust fan of 350/450 mm sweep.

Preparation of old surface of exhaust fan of any sweep by removing old paint using paint remover or by burning off using blow lamp and cleaning with cloth and Spray painting complete exhaust fan with superior quality synthetic enamel paint (Smoke grey) after applying a single coat of primer complete all as directed.

All as per sl item No. 52 above but wall mounted/ Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Half white) complete all as directed.

All as per sl item No. 52 above but Ceiling fan of size 1200/1400 mm sweep with superior quality enamel paint ( Half White) complete all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead GI protection pipe light grade of 20mm dia, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and as directed by Engr-in-Charge.

M&L for testing of old earthing using calibrated earth tester and submitting result to Engr-in-Charge.

Supply and laying in repairs GI earth wire 4 mm dia on walls/floor as earth continuity conductor connected to DBs/ panels etc.

Supply and Fix in repairs GI tubing 15mm dia light grade for protection of GI earth wire complete all as specified and directed.

Supply and fix in replacement of MCB single pole 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.

S&F in replacement of MCB SPN 32-40 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.

S&F in replacement of MCB TPN 63 Amps working on 415 volts, 50 HZ AC, 10 KA ,'C' curve all as specified and directed.

S&F in replacement Triple pole and earth metal clad enclosures with a three pin and earth plug with socket IP-65 protected complete with one triple pole MCB 63 Amps.

S&F in replacement Triple pole and earth metal clad enclosures with a three pin and earth plug with socket IP-65 protected complete with one triple pole MCB 32Amps.

Supply and fix in replacement sheet metal enclosures single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as directed by Engr-in-charge.

Supply & Fix in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord.

Supply and fix in replacement metal clad plug top 3 pin, 20 amps, ISI marked heavy duty for AC connection cord. Make:Legrand/Havells/Scheinder

M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement.

S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure,suitable for 6KW load single phase comprising of 32 Amps SP MCB, 32A power contactor and 230V digital time switch for controlling street lights, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement . Make:Havells Cat Part: IHXSS03120 or equivalent in Indo Asian

S & F sheet metal enclosure (MCCB Box) suitable for MCCB-TP/TPN (63 to 200)Amps 415 Volts and removing the unserviceable item all as specified and directed.

S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 4 sqmm flat or circular complete all as specified and directed.

S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 6 sqmm flat or circular complete all as specified and directed.

S&F in replacement LED bulb 47Watt, 4500K CCT, proffesional luminaries single side connection with < 10% THD with suitable holder. Make: Philips Cat part: TForce Core 47W/5000lm E27 or equivalent in Philips /Wipro

S&F in replacement LED PLL lamp Hercules 18Watt, proffesional luminaries single side connection with < 10% THD. Make: Havells Cat Part No. HERCULESPLL419TL18WLED865SPC or equivalent in Philips/ Wipro

S&F in replacement indoor industrial type surface/wall mounted LED integral batten 20W, 6500K CCT, alluminium extruded body and polycarbonate diffuser, <10%THD, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete removing unserviceable fittings all as specified and directed. Make : Havells Cat part: LUMILINESMART20WLED865PCWH or equivalent in Philips/Wipro/Jaquar

S&F in replacement indoor industrial type recess mounted LED Surface mounted for POP ceiling square downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency.15W, 6500K CCT, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable as required at site with suitable size complete removing unserviceable fittings all as specified and directed Make : Havells Cart Part : EDGEPROSQDLR15WLED857S or equivalent in Phlips/Wipro/ Jaquar

S&F in replacement indoor industrial type recess mounted LED Surface mounted for POP ceiling round downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency.15W, 6500K CCT, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable as required at site with suitable size complete removing unserviceable fittings all as specified and directed Make : Havells Cart Part : GLOWDLS15WLED857S or equivalent in Phlips/Wipro/Jaquar

S&F in replacement LED polycarbonate tube 18Watt, 6500K CCT,proffesional luminaries single side connection with < 10% THD. Make: Havells Cat part : PHOTONULTRAE2.01213T8SSTL18WLED865SPC or equivalent in Philips/Wipro/Jaquar

Supply & Fix in replacement recess mounted LED luminaire 36W 2'x2' , 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for Grid ceiling or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable fittings all specified and directed. Make : Havells Cat Part: PLANO2X2PLR36WLED857S or equivalent in Wipro/Philips

Supply & Fix in replacement recess mounted LED luminaire 36W 2'x2', 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for POP ceiling or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable fittings all specified and directed. Make : Havells Cat Part: PLANO2X2PLR36WLED857SPOPor equivalent in Wipro/Philips/ Jaquar

Supply & Fix recess mounted LED luminaire 36W 4'x1' of size 1195x295x70 mm, 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for Armstrong/ US Gypsum or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable fittings all specified and directed. Make: Havells Cat Part: PLUTONEO4X1PLR36WLED857S or equivalent in Philips/Wipro/Jaquar

Supply & Fix recess mounted LED luminaire 36W 4'x1' of size 1200x300x65 mm, 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for Armstrong/ US Gypsum or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable fittings all specified and directed. Make: Havells Cat Part: VENUSNEOHE4X1PLR36WLED857S or equivalent in Philips/Wipro/Jaquar

S&F in replacement recess mounted LED medium bay light 80W with IP-66 protection pressure die cast housing with high power SMD LEDs as light source of luminous capacity 7600Lumens, 240V, 5000K CCT, with lumnous efficacy of 120lm/watt, aluminium heat sink alongwith elctronic driver including hanging the fitting with hook arrangement required at site. Make: Havells Cat Part : BAYBRITEFLAREHB80WLED857PWBBOLTG or equivalent in Wipro/Philips/Jaquar

S&F in replacement recess mounted LED high bay light with IP-66 protection pressure die cast body with high power SMD LEDs as light source of luminous efficacy 150lm/watt 120W, 240V, 5000K CCT, aluminium heat sink alongwith inbuilt elctronic driver, wide beam angle , including hanging the fitting with required hook arrangement required at site. Make: Havells Cat part: SAUCERGENXMIDHBP120WLED857PWBBOLTG or equivalent in Philips/Crompton/Jaquar

S&F in replacement LED security light fiitting of luminous capacity 2500lumens,IP-66 protection, 5700K CCT, inbuilt electronic driver with <10%THD made up of die cast alluminium housing with high power LED as lighting source and lens embeded toughned glass cover ,seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade 1.5Mtr long bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed by Engr-in-charge. Make:Havells Cat Part:ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in Wipro/Crompton/Jaquar

Material and labour for fixing industrial type sheet metal enclosures Triple pole and neutral with a five pin and earth insulated plug and socket 32 Amps 240 volts complete with all accessaries etc all as directed.

Material and labour for fixing industrial type sheet metal enclosures Triple pole and neutral with a five pin and earth insulated plug and socket 63 Amps 240 volts complete with all accessories etc all as directed.

Material and labour for fixing industrial type sheet metal enclosures Single pole and neutral with a three pin and earth insulated plug and socket 32 Amps 240 volts complete with all accessories etc all as directed.

M&L labour for in replacement of earth pit chambers of standard size at wherever required site complete all as specified and directed.

Maruthi international

SRI SAI ENTERPRISES

CHITRA ENGINEERING CORPORATION

K LAKSHMAN SINGH AND CO