Construction of ASCO building at Kashipur, Rayagada

Excavation of foundation in hard soil within 50m initial lead and 1.5 m initial lift

Filling Foundation and plinth with well graded sand including watering and ramming

CC 1:3:6 with 4 cm size HG metal

Filling the foundation with excavated earth i.e 2/3 quantity of excavated earth @ 2/3 rd rate of E,Work.

Fly Ash Brickmassonry (bricks 23x11x8) in c.m.1:6 in F&P

M -20 grade R.C.C. using 20mm&down graded chips (a) Plinth Band including Tie beam

(b) Footing & Column Base

(c)Column & Beam

(d) Stair Case Wall Beam 1st Floor

(e) Chajja

(f) Slab

(g) Stair case slab 1st floor

(h) Lintel

(i)Stair Case Ground Floor

Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete.

Fly Ash Brick massonry 23x11x8 in cm(1:6) in superstructure etc. complete. 1st Floor

S/F HYSD bar reinforcement Ground Floor

S/F HYSD bar reinforcement 1st Floor

2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips

16mm. thick cement plaster in c.m. 1:6 over Brick masonry G. Floor Inside

16mm. thick cement plaster in c.m. 1:6 over Brick masonry 1st Floor Inside

12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) G floor

12mm. thick cement plaster in c.m. 1:6 over Brick masonry Out side (Above3 '0'' Above G.L) 1st floor

6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. G Floor

6mm thick ceiling plaster in c.m. (1:4) including closed deep chipping etc. 1st Floor

Finishing surface of wall with Acrylic wall puty ( water based) of approved make G floor

Finishing surface of wall with Acrylic wall puty ( water based) of approved make 1st Floor

Wall Priming one coats on new work G floor

Wall Priming one coats on new work 1st floor

wall Painting 2 coats on new work G. Floor

wall Painting 2 coats on new work 1st Floor

Weather Coat two coat on new work Gfloor

Weather Coat two coat on new work 1st Floor

Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc Ground Floor

Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc 1st Floor

Enamel Painting two coats including red oxide primer of approved quality etc. complete GF

Enamel Painting two coats including red oxide primer of approved quality etc. complete 1st Floor

Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4)

Providing and fixing Glazed Ceramic tiles in walls, dados and skirting and in rises of steps on 12mm thick bed of cement plaster (1:3)

Fixing vertified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1)

Fixing vertified tiles in dados, (600mm x 600mm) skirting and in rises of steps on 12mm thick bed of cement plaster (1:3)

Providing fitting fixing AIuminium door with OEL anodized AI door

Supplying, fitting, fixing up window (sliding type) made up aluminium section

Supplying and fixing 2" X 2.5" size FRP door frame including all hardware fittings etc complete.

Supplying and fixing 30mm thick FRP door shutter including all hardware fittings etc complete

Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel etc. complete.

Supplying, fitting afixing of stainless steel of 304 grade in hand railing

Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1)

Providing fitting and fixing of false ceiling with Aluminum anodised

Supply, Fittings & Fixing of Well ring with cover

Electrical Installation

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) Group A

Group B

Group C

Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor o f ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Recessed wiring to submain in 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover etc complete(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard)

Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) -12 Way

Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.(make-HPL/ Havells/ Legrand /L&T/C&S)

S/F of 1200mm High Speed Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Riviera High Speed, Polycab Model-Vital, Polar Model-Winpro) etc.

Supplying and fixing of Stepped type modular fan regulator on existing switch box / cover including connections etc as required.(make-Anchor/cona/Havels/Polycab etc.)

S/F of 8" PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, Polar Model-Winpro) etc.

S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj)

S/F of 60 W LED Street light fitting(Make-Crompton/Philips/Havells/Bajaj)

MV cable laying up to 10 sq.mm 2core on surface Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 20 sq.mm on surface as required.

Providing and fixing M.V danger board of 250 mm x 200 mm made mild steel at least 2 mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as requred.

S/F of 18 Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) as requred.

External PHD work supply :

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/2000 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 25mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.)

Fixation of J Hook in walls

25mm dia UPVC ASTM Ball Valve

110 mm Rigid UPVC Pipe (IS:4985-200) For Latrine Gash Pipe

110mm Vent Cowl (Top of Gash Pipe)

Cost & Fitting Charges of 3 layer White Rotational Module Cylindrical Water Storage Tank (ISI Mark) (1000 lit.)

Internal PHD work supply :

Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete.

Cutting holes through existing brickwork including making good the damages in cement mortar (1:4)

S/F to walls,ceiling and floor unplasticized PVC pipes 15mm.dia PVC pipe [ASTM-D-1785/2004,Sch-80.]:-(per mtr.)

20mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.)

Supplying fitting of all materials i.e (EWC With S-Trap including 10 lit.Cystern, Cover & Jet Spray) labour and T&P for fixing wash down water closet (European type W.C.) with integral "S" or "P"

Supplying fitting of all materials i.e (Orissa pan 23'' including 10 lit.Cystern, foot rest & Hand Spray) labour

Supplying all materials, & fixing glazed earthen-ware squatting urinal (ladies) plate of size (600x355mm.) including Procelain foot rest for IWC (02 No.) and Urinal waste

Supplying of all materials,labour and T&P for fixing of Flat Back Standing Urinal (Medium) 380x580x350including the urinal PVC waste pipe 50 mm x800 mm,

Supplying & Fitting, Fixing of Wash basin (22"x 16") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing) & CP Flange

Supplying & Fitting, Fixing of Pedestral Wash basin (22"x 16") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing) & CP Flange

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm)

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm)

Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.

Providing and fixing of 15 mm CP 2 in 1 Bib Cock [including cost]

Providing and fixing of 15 mm CP 2 way Bib Cock [including cost]

15mm dia CP Extension Piece 2"

5" C.P. Grating

CP Flange

Supplying all materials,labour and T&P for fixing of Mirror (600 x 600)mm bevelled edge mirror of superior glass -wood sheet

Supplying all materials,labour and T&P for fixing of Framed Mirror of superior glass -wood sheet and fixed to wooden plugs

Fitting & fixing of 15 mm CP revolving Shower bend type arm 600x25x25mm square / Round shape with wall mounted showers including fittings of flange, 15mm.dia.C.P. stop cock, CP Gratting

Providing and fixing on wall face unplasticised 110mm dia OD PVC SWR S/S Pipe (ISI) (Rain Water Pipe)waste and rain water pipes conforming to IS : 13592 es

110 mm dia PVC SWR Plain Bend 45'( for Rain Water Pipe)

110mm dia PVC SWR Door Bend 87.5'

110mm dia PVC SWR Plain Bend

110 mm dia SWR PVC P Trap

110mm dia PVC SWR Gully Trap

110mm door Cross Tee

110mm dia PVC SWR pipe clip

75mm dia Plain Bend

75mm dia PVC Door Bend (87.5')

125mm x 75mmSWR off set BEND

110 mm Door Bend