15th CFC - Untied Grant -2023-24-Providing Cement concrete road at Muthuramalingam 3rd Street (Unicode No.121026R507) and Construction of Storm Water Drain at Muthuramalingam 4th Street (Unicode No.121026S208) in Chinnamanur Municipality

Amount

Dismantling of existing damaged Brick Masonary surface carefully, claearing the debries away from the site, cost including all costs etc. complete complying with standard specification.PWD SOR-2024-25.Vol-1.Page No-27

ORDINARY SOIL (SS20A) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth HGS SS.20.A. Road sectioning.

Conveyance of Excavated Excess Earth away from the site to 2K.M including loading and transportation charges etc, complete as per standard specification. For 1M3.PWD SOR-2024-25.Vol-1.Page No-30

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting centering for sides and soffits including support and strutting upto 1.00 m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm cost including all costs etc., complete as per standard specification. For cement concrete flooring.

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 10& 12mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Finishing the top of floor with Granolithic Finish with PCC 1: 2: 4 (one cement, two sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per standard specification

Collection, supply and fixing of Bitumen pad of 20mm thick of best approved quality by the departmental officers, cost including all cost and conveyance of materials to site, labour charges and all other costs etc., complete as per standard specification.PWD SOR-2024-25.Vol-1.Page No-99

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with CM 1:3 (One part of cement & three parts of sand) mix for 20 mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers

Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor spring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers.PWD SOR-2024-25.Vol-1.Page No-117

Provision for GS 18%

K.Vanaraj (BID ID -1270765)