Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.8 LAdmitted-Finance | +0.00% | ₹3.8 L | L1 | Admitted-Finance |
| 2 | L2₹3.9 LAdmitted-Finance P A SHAH ROAD CAL 33 700033 | KOLKATA | KOLKATA | WEST BENGAL | 700033 | +2.50% | ₹3.9 L | L2 | Admitted-Finance |
| 3 | L3₹4.0 LAdmitted-Finance | +7.00% | ₹4.0 L | L3 | Admitted-Finance |
Tender Value
₹3.8 L
EMD Value
₹8,000
Closing Date
13 Jan 2026, 2:00 pmClosed
E.E (Water Supply)
110, Alipur Road, Kolkata-700027
SUPPLY, DELEVERY AND INSTALLATION OF 2 NOS.20 HP NEW SUBMERSIBLE PUMP-MOTOR SET WITH ALLIED WORKS AT SENHATI SACHINDRA NATH PARK CAPSULE BPS.
2025_KMC_975830_1
KMC/WS/SENSP/25-26/21
Open Tender
Miscellaneous Works
15 days
SENHATI SACHINDRA NATH PARK CAPSULE BPS
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹8,000
2 Jun 2026
24 Dec 2025
21 Jan 2026
24 Dec 2025
13 Jan 2026
24 Dec 2025
SUPPLY AND DELIVERY OF(20 HP, 3 STAGE, MINIMUM BORE 200MM, HEAD 52, DISCHARGE 70) CLEAR WATER VERTICAL WET TYPE SUBMERSIBLE PUMP SUITABLE FOR BORE WELL CONFORMING TO IS: 8034 (AND AS AMENDED THEREAFTER) WITH STANDARD MOC FOR POTABLE CLEAR COLD WATER AND BEE 3 STAR RATED CAPABLE OF DISCHARGING NOTED M3/HR AGAINST HEAD OF WATER COLUMN. THE PUMP SHALL BE DIRECTLY COUPLED WITH A CONTINUOUS RATED 2-POLE SUITABLE WET TYPE VERTICAL SQUIREL CAGE INDUCTION MOTOR CONFORMING TO IS: 9283 (AND AS AMENDED THEREAFTER), SUITABLE FOR OPERATION IN AC THREE PHASES 415 V, 50 HZ(CATEGORY B MOTOR). SOR PHE NOVEMBER 2021.
CHAPTER - VIII SUPPLYING OF MATERIALS E. E. R. W. MS BLACK PIPE 8.15 Sypply of E.R.W.M.S. (Electrical Resistant Welded M.S.) black pipe of ISI Mark as per relevent IS Specification ( heavy quality ) having wall thickness not less than 5 mm. [N.B.: The rates for supply of TATA Make pipe will be arrived at by adding 20% of the corresponding rates ] Diameter in mm (Internal)150
CHAPTER - VIII SUPPLYING OF MATERIALS 8.8 Ductile iron double flanged manually operated sluice valve generally conforming o IS : 14846, having body, door, dome, gland in graded ductile iron to IS 1865, four faces and spindle nut of gun metal to IS : 318, inside screw non- rising stainless steel AISI-410 spindle valves suitable formaximum working pressure of 10 kg/cm... and body tested 15 kg/cm..., flanges flat faced and drilled to IS: 1538 :1993. Valves tested by closed end method only. 350mm and above valves are complete with enclosed gear box with anti friction device.Diameter in mm 150
CHAPTER - VIII SUPPLYING OF MATERIALS 8.9 Cast iron double flanged single door swing Non-Return Valve generally conforming to IS 14846 having body, door cover in graded cast iron to IS 210 Gr. FG 200, body and door rings and bearing block of leaded tin bronze to I.S 318 Gr. LTB 2, hinge pin of ST AISI410 valves suitable for maximum working pressure of 10 kg/cm... and body tested 15 kg/cm.... Diameter in mm 150
Schedule of Rates FOR Wiring in PVC Insulated and Sheathed Wire in EI Conduits/ GI Conduits By single core stranded Copper conductor Wiring with 1.1 KV grade single core PVC insulated stranded Copper wire in EI conduit/GI conduit and painting 3x6 sqmm wire in 19 mm conduit incl. S&F 2x10 SWG GI ECC GI Conduit
CHAPTER - VII MISCELLANEOUS ITEMS Coating of 'Food Gr. Epoxy' Resin of thickness not less than 240 micron with a low-viscosity, crystallization-resistant food grade epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal, concrete and wood surface to protect from corrosion, give anti-fungal properties ,as per guide line of FDA and USDA as well as damage from chemical reaction after making the surface free from dust, oil and moisture etc. all complete as per instruction and to the satisfaction of ElC. [ This item will be operated on prior permission from the concerned SE/Dy Chief Engineer]
CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.3 M.S. Pipes 2.3.1 Gas cutting of M.S. pipes and/or M.S. plates of different thickness all complete as per specification and direction of the Engineer-in- Charge. Thikness in mm 5mm to 8mm thick plate
BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (b) Continuous weld.
SKILLED CATEGORY (COMPUTER OPERATOR & SUCH OTHER CATEGORY), AS PER MUNICIPAL SECRETARY CIRCULAR NO-06 OF 2025-2026 DATED 24.07.2025
SEMI- SKILLED CATEGORY (FIELD WORKER & SUCH OTHER CATEGORY), AS PER MUNICIPAL SECRETARY CIRCULAR NO-06 OF 2025-2026 DATED 24.07.2025
UNSKILLED CATAGORY (MAZDOOR,MALI & GRAVE DIGGER SUCH OTHER CATEGORY) AS PER MUNICIPAL SECRETARY CIRCULAR NO06 OF 2025-2026 DATED 24.07.2025
LMV / TRUCK OF CONTRACTOR SUPPLY FOR CARRYING MATERIALS FOR MAINTENANCE WORKS.
Sub Total
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.92 MB
TECHBID.pdf
Tender Documents • 0.75 MB
BOQ_2376536.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid