Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹34.5 L+₹2.5 L (7.77%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹35.0 L+₹3.0 L (9.34%)Rejected-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹35.4 L+₹3.4 L (10.6%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹35.6 L+₹3.5 L (10.9%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹38.7 L
EMD Value
₹77,400
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN REPAIR WORK IN THE AREA OF AGE B/R-I AND AGE E/M (CENTRAL) UNDER GE (CENTRAL) DELHI CANTT-10
2023_MES_612340_2
GE/C-43/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹77,400
Yes
22 Sept 2023
25 Aug 2023
11 Sept 2023
25 Aug 2023
9 Sept 2023
28 Aug 2023
25 Aug 2023 - 28 Aug 2023
Amount
Surface dressing not exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr in charge.
Excavation in trench not exc 1.5m wide and not exc 1.5m in deep and getting out in soft/loose soil.
M&L for PCC 1:4:8 type D-2 using 40mm graded aggregate as in foundation mass concrete.
M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in CM (1:4) etc complete all as specified and directed.
M&L for brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in.
M&L for sand filling under floor or in foundations including watering and consolidation.
M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.
M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S&F aluminium ventilator partly glazed/ gauzed including frame and chanel of seciton and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fan complete all as specified and as directed.
Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely). Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made.
Factory made signle extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strngth of 1800N (Face) and 900 N (Edge), minimum compressive strength 50N mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless stell butt hinges of requried size with necessary full body threaded star headed counter sunk SS screw, all as per direction of Engr-in-Charge. Note: Stainless steel butt hinges and necessary SS screws shall be paid separtely.
S&F Stainless steel butt hinges medium weight 100 mm size fixed with MS screws.
S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.
S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws.
S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.
Supply & Laying 3 Layered PP-R (Polypropylene Random Copolymer) Pipes 16mm Outer Dia (Bore) ISI Marked PN-16, SDR 7.4 UV Stabilised and Anti-Microbial Fusion Welded having Thermal Stability for Hot and Cold water Supply including all PP-R Plain and Brass Threaded Polypropylene Random Fittings (such as Bends ,Elbows, Tees, Short Pieces ,Connectors, Back - Nuts Capps,Plugs, Unions etc) Laying in Trenches/Floors/Ducts or Fixing to walls, etc, and also Cutting of pipes as required , comlete as all specified and as directed.
All as per Item No 20 here-in-before, but PP-R (Polypropylene Random Copolymer) Pipes 20 mm outer Dia (Bore), ISI Marked PN-16.
Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.
Supply and fix vitreous china wash hand basin (Oval type with pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste cupling including all necessary fitting and fixtures complete all as specified.
Supply and fix vitreous china squatting ladies urinal white with integral foot rests including fitting and fixtures etc complete all as specified and directed by Engr-in-Charge.
S&F vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.
S&F plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified.
Supply and fix in repair PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified all as specified.
S & F viterous china Urinal full stall type, white including providing & fixing plugs, beddinjg urinal against wall in cement mortar (1:2) securing to plugs with & incl 60mm long brass screws, pointing around urinal back in cemnet, with & including PTMT grating and union for discharge pipe and urinal spreder including waste pipe of polythelene of low or high density or PVC 32mm dia, complete all as specified & directed.
S & F 15 mm dia 600mm long PVC connections with brass check nut complete.
S&F Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.
S&F Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.
S&F bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed.
S&F angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.
S&F 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.
S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.
S & F concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.
M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.
M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Chequered cement concrete tiles with grey cement and pigment 30cm X30cm X22mm thick set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.
Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.
S & F in repairs lid for polyethelene water storage tank exc 500 ltr and n exc 1000 ltrs including fixing PTMT nuts/binding wire complete all as specified and directed.
S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.
S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete.
S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete.
S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete.
S&F for 110 mm bore PVC (SWR) with door plate & tee complete all as specified and as directed.
S&F for 75 mm bore PVC (SWR) with door plate & tee complete all as specified and as directed.
S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillers, trusses , water tank stage where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed
M & L for Formwork to sides of pillars, posts, struts, piers, columns etc fair finished surface.
M & L for RCC Type B1 1:2:4 (20mm graded aggregate) use as in Columns, pillars, piers, posts and struts
M & L for RCC Type B1 1:2:4 (20mm graded aggregate) use as in Beams, cantilevers, bressumm ers, lintels over 1.5m span
M & L for Formwork to sides & soffit of lintel beam etc fair finished surface.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
S&F in repairs Toilet paper holder , viperous china box type complete all as specified & directed.
S&F in repairs in repairs Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minium weight 40 gm).
S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed all as ppecified .
S & F in repair towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.
Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.
Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.
M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-charge.
Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm incl welding complete all as specified and directed.
S&F for 12mm thick tinted/frosted glass with all necessary fitting for partition of urinal complete all as specified and dirceted.
M&L for 200mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate in concrete bedding to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and directed.
M&L SFRC Factory made Precast cement concrete manhole cover' area of each cover Ex .20sqm but not exceeding 0.75 sqm 50 mm thichK TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied and directed by E-IN-Charge
M&L SFRC Factory made Precast cement conc rete manhole cover' area of each cover not exceeding 0.20 sqm 50 mm thick TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specified.
Taking down chowkats or frames exc. 1.5sqm but n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.
Taking down chowkats or frames exc 4 Sqm but not exc. 6 sqm each with shutters (without taking off shutters from frames ), complete all as specified.
Supply and fixing factory made uPVC white colour Three track panels sliding door with fly proof S.S wire mesh (two Nos, glazed & one no. wire mesh panels) made of (big series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3+_ 0.2mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door above 2.00sqm upto 5sqm comprising of upvc chamfbered frame, with in built roller track and sash extruded profiles duly reinforced woth 1.60+_ 0.2mm thick galvanised mild steel section maid from roll forming process of required length (shape & size according to upvc profile) Appropriate dimension oupvc extruted glazing beads, uPVC extruted interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels alongwith zinc plated mild steel multi point looking having tansmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120kg) GI fastners 100X8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and dirtected by engineer-in charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sah extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptable but no extra payment on this account shall be made.
S&F 5mm thick pin headed glass panes used in anodised aluminium glazed/gauzed windows and ventilators shutters exc 0.5sqm in each pane fixed complete all as specified
S&F pressed steel frames,size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. incl one coat of red oxide primer.
S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.
S&F factory made 35mm thick second class hard wood Glazed and skelton door shutters , open rebated and prepare to receive glass, gauge etc, size of members of shutters as specifed in SSR part I, section 8 clause 8.24(b)
S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified.
S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc.
S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane.
Supply and fixing PVC wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge.
S&F door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs.
Supply and fixing Floor door stopper 140mm long of aluminium alloy and tongue, anodised with hard drawn steel spring fixed in floor etc complete all as specified & directed by Engineer-in-charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level).
M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring.
M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .
S&F sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified.
Taking down cement or cement lime plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L Non - skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile n. exc. 0.11 Sqm but exc. 0.18 Sqm, in wall,skirting etc set and jointed in neat cement slury & pointed in coloured cement to match laid over a 10mm thick rendering in CM 1:4.
M&L 10mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished even and fair.
Taking down chowkats or frames n.exc. 1.5 Sqm (without taking off shutters from the frame).
S&F steel windows with side hung shutters incl box type hing, steel handle and peg stay complete with glazing bar
All as per Item No 96 above but without glazing bars
S & F mild steel hollow pipe any section in purlins, rafter, vertical post including cleats,distance pieces etc including welding tubes complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.
M&L 15mm thick rendering on any face fair faces of brick work or concrete surfaces in cement mortar 1:4 finsihed the surfaces even and smooth without using extra cement.
S&F aluminium handle 125 mm long cast type, anodised complete fixed with steel screws complete all as specified and as directed by Engr-in-Charge.
M&L two coats of synthetic enamal paint to steel surfaces of any discription over 10 cm width or girth not otherwise described after preparation complete.
S&Fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L round bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
All as per Ser Item No 105 but 5mm dia above for stirrups
Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire.
Supply only chain link MS galvanised fencing any size or any type complete.
M&L for roof treatment as per the description below :- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified
M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed
Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.
M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc for iron gate, window n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')
M&L for Chajjas,fibreglass Reinforced Plastic (F. R. P.)chajja 4mm thick of required colour ,size and design made by Resin Transfer Moulding (RTM)machine Technology, Resulting in Void free compact laminate in single piece ,having smooth gradual slope curvature for easy drainagee of water and duly reinforced by 2Nos vertical and 1No horizontally 50x2 mm thick MS flat with 12mm in built hole for gouting on the existing wall along with the 50mm flanges duly inserted and seaaled in the wall complet in one single piece casted monolithically, including all necessary fitting . The FRP chajja should manufacture using unsaturated polyester resin as per IS: 6746 , duly reinforced with fibreglass chopped strand mat (CSM)as per IS:11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extrem of tempreture ,weather & sunlight. Make Duratuff/Lexan/VMT Plasete Ltd/Coxwell Domes Engr (P) Ltd.
Supply & Fix Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 125mm size Complete all as specified and directed by Engineer-in-Charge.
S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltrs capacity.including float valve 20mm size including disconnecting of existing water tank complete all as specified.
Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .
S&F for Anodised aluminium snap gridframe work for false ceiling all as specified Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately Complete.
M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :
(a) One light/fan point controlled by one by one way switch ( switch to be measured and paid separtely)
M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed.
M&L switch Piano flush type 5 Amp SP one way all as specified and directed by Engr in Charge.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
Supply and fix LED batten luminaire surface mounted T-8, 4 feet system wattage not less than 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage not less than 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, Class - 1, SDCM <5 short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥80 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.
Supply and fix 10/12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.
Supply and Fix not less than 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.
Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.
M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to GI strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of sixe 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia Med grade GI pipe for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed.
M&L distribution board SPN 8 way with 100 Amp rated bus bar double door.
STRATO 2x2 Ultra Slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distrubution suitable for armstrong/grid ceiling.pannel light
M&L MCB SPN 32 Amp "B " curve .
S&F MCB SP 6-32 Amps 240 volts curve 'B' series 10 KA 50 HZ complete all as specified and directed.
S&F Framed mild steel work as in doors or gates of angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A).
Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L 60mm thick interlocking paver block with grey cement and with pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.
M&L for preparation of untreted plastered surface even and smooth using 2mm thickness plaster of paris putty over plastered surfaces all as specified and directed by Engineer-in -charge.
M & L for preparation of new plastered surface of wall and applying two coats of acrylic smooth exterior paint complete all as specified and directed.
S&F hard drawn welded steel wire fabric weight per sqm not exceeding 4 kg complete all as specified and directed by Engineer-in-Charge.
Schedule of Credit
Keshav Brothers
M/S ANIL KUMAR
imran construction company
R S CONSTRUCTION CO.
SHREE RAM BUILD TECH
M/S MSD & Associate
LAMBA ENTERPRISES
GIAN ENGINEERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .