Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC NH 17 MAIN ROAD BINAGA BAZAR KARWAR 581307 | KARWAR | UTTARA KANNADA | KARNATAKA | 581307 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹13.0 L+₹3.8 L (41.5%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
22 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
PROVISION OF GEN SET FOR SURYA SAINIK SADAN AT OD FORT UNDER GE (EAST) PRAYAGRAJ.
2024_MES_653074_2
81870/E/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
Class E and Category b(i)
6 documents required · 6 mandatory
₹500
GE (East) Prayagraj
₹19,400
Yes
17 Sept 2024
26 Jun 2024
29 Jul 2024
27 Jun 2024
22 Jul 2024
3 Jul 2024
Amount
Silent/containerzed diesel engine driven generating set complete to give an output of 62.5 KVA AC 415 Volts, 50 Cycles per second, 3 phase 4 wire supply with power factor 0.8, 1500 RPM diesel engine and alternator mounted on common base plate, anti vibration rubber mounting pad (AVM Pads "B" series) complete in all respect with and including accessories and components as specified below including sound proof integral accoustic enclosure for 62.5 KVA Gen Sets ECO friendly and as per Ministry of Environment, forests notification 17 May 2002 complete including, emergency stop button, illumination inside canopy, Temperature sensor for high temp safety, exhaust fan etc complete as per IS 4722, AMF type with relay panel for automatic starting on mains failure. (a) Diesel Driven Engine (Prime mover):- Multi cylinder, vertical/horizontal, 4 stroke cycle, suitable for 62.5 KVA alternator, water cooled conforming to BSS- 649 rated for continuous running diesel engine suitable to FF matching BHP at 1500 RPM as per latest ISS/BSS, capable of taking 10% over load for any one hour in any 06 hour running, complete with and canapoy thickness minimum 3.00 mm including following accessories:- (i) Fuel filter (ii) Governor ( Electronic) (iii) Complete battery set with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump. (vi) Lubricant oil filter (vii)Digital oil pressure gauge (viii) Any other parts as prescribed by manufacturer for its good functional performance.
(ix) Battery charging alternator suitable for charging Batteries. (x) Dry type air filter (xi) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xii) Coupling guard. (xiii) Exhaust pipe fully extended to exhaust gases outside the acoustic enclosure including silencer and necessary insulation lagging all as per manufacturer's recommendations. (xiv) Fuel tank of MS sheet and of capacity for 12 hours running on full load with inlet and outlet connection, filling cap, drain valve, air vent with caliberated scale on outer surface, floor mounted with suitable angle iron supports. (xv) Digital type RPM meter with hour meter. (xvi)Self starter of suitable size (xvii) Turbo charger (xviii) In line mono block (xix)Fuel pump (xx)Digital type Coolant temp gauge. (xxi)Self starter with auto electric start accessories (xxii) Engine safety low lubricant oil pressure and high coolant temperature. (xxii) Test certificate. (b) Alternator:- 62.5 KVA at 0.8 PF self excited self regulated with fast response thyristor type, 3 phase 50 Hz 415 Volts, 1500 RPM 4 wire alternator, screen protected drip proof free from commutation problem, continuous rating confirming to IS-13364(Part-2) complete with automatic voltage regulator output voltage regulated between + 1% of set volts from no load to full load.
(xiv) Battery charger suitable to charge the battery of 12 V/24 Volt DC with buck/ boost system - 01 No (e) Supply & install of Acoustic Enclosure suitable for 62.5 KVA DG set as under (i) Fabricated out of CRCA sheet of of minimum thickness 3.15mm. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. (ii)The doors are gasketed with EPDM gaskets. (iii) Sound proofing with high quality rock wool/ mineral wool confirming to IS 8183 of 50mm thickness and density at 96 Kg/M3 covered with fiber glass cloth and perforated powder coated sheet specialy designed allenuators (Sound controller) at air entry and exit of the container noice level shall be not exceed 75 Db at 1 meter distance as per CPCB/Government of India Norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button outside the container. vi) Provn of light inside the canopy i.e. providing LED light fitting 1 x10 Watt with wiring and control switch. (f) MOUNTING ARRANGEMENT- Prime mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame has provision for grouting on foundation bolt as well as fixing on vibration mounts provision is made in base frame for tilting arrangement of DG set as recommended by manufacturer. The base frame shall have provision of lifting hook for convenient lifting of complete set ie along the canopy engine and alternator. (g) cost of constr of PCC plinth of DG Set as per manufuacture design and recommendation deemed to be included in this item.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all specified and directed.
Excavating in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc exc 10 sqm on plan and n.exc 1.5 m in depth and getting out as I soft/ loose soil complete all as specified and directed
Returning filling in, including spreading levelling, watring and well ramming in layers n exc 25 cm complete all as specified and directed
Removing excavted material n exc 50 m and depositing where directed at level n exc 1.5 m above the staring point as soil complete all as specified and directed.
Sand cushioning (dry sand) to under ground cable for cable protection in layers of 23cm thick ( 8 cm thick before laying of cable and 15cm thick after laying of cable) in trenches complete all as specified & directed. Note:- Only puned layers shall be measured.
Supply and laying dry well brurnt locally available bricks sub class 'B' brick laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.
S&F ON Load change over switch 415 V in sheet metal enclouser 4 pole of capacity 100 Amps including electrical connection with cable complete all as specified and directed.
M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl galvanised earth lead strip 25mmx4mm connected by means of nut bolts etc to earth plate one end connected to continuous earth strip incl 40mm GI light grade protection pipe & 20mm GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. Note :- Rate for GI strip & GI protection pipe upto 7.5mtr are inclussived in the rate to be quoted by the Contractor against this item.
M/s Durga Traders (BID ID -3065370)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .