Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC INDUSTRIAL ESTATE DOLLYGUNJ PORT BLAIR 744 103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.4 L+₹3.4 L (8.48%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹43.6 L+₹3.6 L (8.96%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹46.8 L+₹6.8 L (17.1%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹47.2 L+₹7.2 L (18.0%)Rejected-Finance C O M S MITHUN ENTERPRISES MINNIEBAY JUNCTION PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junglighat PO Por Blair
DAY TO DAY MAINTENANCE AT AJAY BAUGH AND CERTAIN OTM ACCN UNDER AGE B/R I AT GE MINNIEBAY, PORT BLAIR
2022_MES_541177_1
8162/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹80,000
Yes
23 Sept 2022
27 Jul 2022
22 Aug 2022
27 Jul 2022
18 Aug 2022
9 Aug 2022
60 days
Amount
Taking down existing chowkats n.exc. 1.5 Sqm each without taking off shutters from the frames complete all as specified and as directed by Engr-in-Charge.
Taking down existing chowkats exc. 1.5 Sqm and n.exc 4.0 Sqm each without taking off shutter from the frame complete all as specified and as directed by Engr-in-Charge.
Taking down shutters of any description exc 1.0 Sqm and n.exc 2 Sqm complete all as specified and directed by Engr-in-Charge
Taking down and refixing of wooden shutters of any description exc 1.0 sqm and n.exc 2.0 sqm after necessary repairs complete all as specified and as directed
Resecuring or easing & adjusting wooden shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each without taking down from chowkats complete all as specified and as directed by Engr-in-Charge
Cutting holes in brick walls, not exc half brick thick wall in cement mortar for inserting hold fast and making good dismantles portion in CM 1:3 or PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and as directed.
S&F mild steel works as in small articles such as hold fast of flat iron bent to shape making holes etc complete all as specified and as directed by Engr-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-Charge
M & L for Mild steel 1 mm thick plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed by Engr-in-Charge
S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.
S&F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge
S & F second class hard wood factory made 35 mm thick plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply . The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-Charge
S&F 35 mm thick Glazed and skeleton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers including necessary fillets of 1st class hard wood , edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified and as directed by Engr-in-Charge
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening, complete all as specified and as directed by Engr-in-Charge
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed by Engr-in-Charge
S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge
S & F Anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as stainless steel friction hinges (2 Nos ) suitable handle (1 no.) complete all as specified and as directed
S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed by Engr-in-Charge.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-Charge
S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engr-in-Charge
S & F 100 mm size, medium weight Butt Hinges, stainless steel including fixtures complete all as specified and as directed by Engr-in-Charge
S & F 150 mm size aluminium anodised barrel tower Bolt of extruded section complete all as specified and as directed by Engr-in-Charge
S&F 150mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed by Engr-in-Charge.
S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S & F in repairs Aluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed by Engr-in-Charge
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engr-in-Charge
S & F in repairs 100 mm size, medium weight Butt Hinges, stainless steel including fixtures complete all as specified and as directed by Engr-in-Charge.
S & F in repairs Aluminium anodised Handle, of extruded section fabricated type of size 100mm long complete all as specified and as directed
S&F in repairs 18 mm plywood, grade BWP, type BB fixed in cup board shutters, shelves & partition complete all as specified and as directed by Engr-in-Charge.
S & F in repair 18 to 20mm thick pre laminated HDF panels of interior grade type-II with melamine finish of approved shade for kitchen cabinet/wardrobe/wall paneling fixing with necessary fitting like keku fitting,spring clip,hanger plate,push fix or stud fitting as per manufacturers instructions complete all as specified and as directed by Engr-in-Charge.
S&F stainless steel auto closing heavy duty modular hinges of size 103 x 64 mm for cupboard shutters all as specified and as directed by Engr-in-Charge.
S & F in repairs 20mm harrison rails, stainless steel , chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
S&F in repairs stainless steel brackets for fixing of curtain rods complete all as specified and as directed by Engr-in-Charge.
S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc all as directed by Engr-in-Charge.
M&L for minor repairs to aluminum window/ door shutters and making serviceable the same by means of adjustment, greacing as necessary etc all as specified and directed by Engr-in-Charge
M & L for making good under cills or over arches, lintels and bressummers. including all pinning when necessary in CM 1:4 with necessary adhering compounds with old concrete surfaces complete all as specified and as directed .
Demolition of cement Concrete (unreinforced) and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge
M&L for 40mm thick plain cement concrete (nominal mix) 1:2:4 type B0 using 12.5 mm stone aggregate as in flooring complete all as specified and as directed by Engr-in-Charge.
Dismantling tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries off the premises complete all as specified and as directed.
M&L for coloured ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.11 Sqm but n.exc 0.18 sqm in floors etc colour as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engr-in-Charge
M&L for coloured ceramic tiles edge to edge joint 7 to 8 mm thick on vertical surfaces as in skirting matching with the floor tiles set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10 mm thick backing plaster in CM (1:3) as specified and directed by Engr-in-Charge
M&L for non skid / matt finish ceramic tiles coloured of size 300x300x7-8mm thick laid in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:4 complete all as specified and as directed by Engr-in-Charge
Taking down cement plaster on block masonry or concrete surfaces and racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 10mm thick on fair faces of block masonry or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge
M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or block masonry surfaces including mixing water proofing compound as per manufacturers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule
Supply only Integral water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.
M&L for providing and laying 20 mm thick POLYMER MODIFIED MORTAR over identified R.C.C. members in One layer in proportion of 1:5:15 by weight of polymer of approved make, cement and filler material of approved make, blended to a required consistency and applying and finishing even and smooth, curing, complete as manufacturer instruction including providing necessary formwork, mild steel shear key wherever required, bonding slurry, etc complete all as specified and as directed by Engr-in-Charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed by Engr-in-Charge.
S & F aluminium flat work as inwind ties screwed including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engr-in-Charge
Taking up or down old/chocked water tubing 20mm bore with fittings from trenches/walls and stacking at site for credit to contractor all as specified and as directed by Engr-in-Charge.
Taking up or down old/chocked water tubing 25 or 32mm bore with fittings from trenches/walls and stacking at site for credit to contractor all as specified and as directed by Engr-in-Charge..
S&F 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed by Engr-in-Charge.
S&F 25mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed by Engr-in-Charge.
S&F 32mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floor complete all as specified and as directed by Engr-in-Charge.
S&F 20 mm outer dia CPVC pipe brass elbow complete all as specified and as directed by Engr-in-Charge
S&F 20 mm outer dia brass Tee complete all as specified and as directed by Engr-in-Charge
S & F 20 mm Male Brass Threaded Adaptor (MT A/ MBT A) complete all as specified and as directed by Engr-in-Charge
S & F 25 mm Female Brass Threaded Adaptor (FTA/ FDTA) complete all as specified and as directed by Engr-in-Charge
S & F 32 mm Female Brass Threaded Adaptor (FTA/ FDTA) complete all as specified and as directed by Engr-in-Charge
S & F 32 mm Brass CPVC Tank Adaptor complete all as specified and as directed by Engr-in-Charge
Dismantling of water tank capacity exc 500Ltr and n.exc 1000 ltr complete all as specified and as directed by Engr-in-Charge
S&F Rotational molded polyethylene water storage tanks capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge
M&L for taking down/up old GI tubing of 15mm bore and refixing the same in new or old position (walls,ceiling, flooring etc.) after repairs complete all as specified and as directed by Engr-in-Charge
M&L for taking down/up old GI tubing of 20mm bore and refixing the same in new or old position (walls,ceiling, flooring etc.) after repairs complete all as specified and as directed by Engr-in-Charge
M&L for taking down/up old GI tubing of 25mm to 32mm bore and refixing the same in new or old position (walls,ceiling, flooring etc.) after repairs complete all as specified and as directed by Engr-in-Charge
M&L for taking down existing wash basins any size and type for repairs, refixing the same in position after necessary repairs / replacement of brackets with cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge
M&L for taking down existing kitchen sinks any size and type for repairs, refixing the same in position after necessary repairs / replacement of brackets with cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge
S&F in repairs 32mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 40mm waste coupling, brass, chromium plated for glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end all as specified and as directed by Engr-in-Charge. .
S & F in repairs 15mm wall mixer brass chromium plated for WHB for mixing hot & cold water screwed down for iron /CPVC and fixed complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15mm wall mixer brass chromium plated for shower for mixing hot & cold water screwed down iron /CPVC and fixed complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15 mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed by Engr-in-Charge.
M&L for fixing only in repairs bib cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed.
S & F in repairs vitreous china wash hand basin, white, flat back of size 550 mm X 400 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15 mm dia pillar tap, cast copper alloy, chromium Plated, fancy type with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.
Fixing only in repairs pillar taps including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 25mm dia ball brass valve high pressure, with polythene float and fly nut complete, screwed for iron pipe, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge.
S&F in repairs stop valves cast copper alloy chromium plated, fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore, including necessary cutting and making good wall or floor tiling to match existing etc complete all as specified and as directed by Engr-in-Charge. Note : Cost of tiles of any type/size shall be included in the quoted rate
Fixing only in repairs stop cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and as directed by Engr-in-Charge. .
S & F in repairs vitreous china white squatting Pan of IWC pattern of Size 580 mm 'P' or 'S' trap, front or back inlet and foot rests ( excluding cistern and flush pipe) including provision of concrete bedding in 1:5:10 and making good to floor complete all as specified and as directed by Engr-in-Charge.
S & F in repairs vitreous china wash down water closet [Pedestal pattern] EWC, white [excluding flushing cistern and flush pipe] including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 25 mm CPVC ball valve / Gate valve screwed both ends for CPVC pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC connections 15mm size with PTMTnuts of length 450mm with rubber washers on either side for connecting water supply line to WHB, flush tank, etc complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 125mm shower rose brass chromium plated with or without swivel joint complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC flexible waste pipe 32/40 mm dia for wash hand basin/kitchen sink etc complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 20mm dia tubular towel rail 'D' type, 600mm long brass chromium plated complete all as specified and as directed by Engr-in-Charge.
S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 1140 mm x 500 mm bowl size 510 mm x 400 mm x 190 mm complete all as specified and as directed by Engr-in-Charge.
S & F in repairs stainless steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg complete all as specified and as directed by Engr-in-Charge.
S&F in repairs 1.5m long health faucet chromium plated complete all as specified and as directed by Engr-in-Charge.
S & F in repairs 15mm bore two way bib tap cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and as directed by Engr-in-Charge.
S & F in repairs plastic water closet seat cover, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-Charge.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed by Engr-in-Charge.
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface and then providing 10mm screed bed with water proofing compound with required slope complete as directed :- (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface. (b) Laying 4mm thick APP membrane Plain finish weight not less than 3 to 4 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap.(c) Applying bituminous primer @ 1.2 kg/Sqm and applying one coat of bituminous aluminium paint at the rate of 0.3kg/sqm Note : The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane.
M&L for preparation of surface and applying 1mm thick plaster of paris putty complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of new surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new wood/wood based surfaces, exc10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
S S CONSTRUCTION
EXCEL ENGINEERING WORKS
bansal construction
M/s Shiva Engineering
Kathir Marketing Services
V CHINNA DURAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .