Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC 1280 A 7TH MAIN ROAD 3RD CROSS PRAKASH NAGAR RAJAJINAGAR III STAGE BANGALORE 560021 | BENGALURU URBAN | KARNATAKA | 560021 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.4 L+₹96,705.55 (2.73%)Rejected-Finance SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹36.4 L+₹96,790.85 (2.73%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹36.8 L+₹1.3 L (3.78%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹36.9 L+₹1.5 L (4.12%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
25 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NORTH BANGALORE
GARRISON ENGINEER NORTH BANGALORE T 64 MEANEE LINES MEG AND CENTRE BANGALORE 560042
ADDN ALTN AND SPL REP OF BLDG NO P 179 OR LIVING ACCN OF RECORDS MEG CENTRE UNDER GE NORTH BANGALORE
2022_MES_560363_1
8357
Open Tender
Civil Works
Item Rate
180 days
BNG
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER NORTH BANGALORE
₹70,000
Yes
14 Jan 2023
29 Oct 2022
2 Dec 2022
29 Oct 2022
25 Nov 2022
14 Nov 2022
29 Oct 2022 - 12 Nov 2022
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed
Demolition of reinforcement concrete of any description and in any position not otherwise specifically providced for etc complete all as specified and as directed
Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed
Demolition of brick work / stone masonry / PCC block masonry built in cement mortar of any description all as specified and directed.
Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface etc complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed
Taking out unserviceable wire cloth in window / door including FI / wooden beading etc complete all as specified and as directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden / Steel frames etc complete all as specified and as directed
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed
All as per item No 10 above but erection and fixing only after removing all the bending including welding/ reiveting etc complete all as specified and as directed
M&L Hollow steel section for structural as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to IS-4923 etc complete all as specified and as directed
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed
S&F false ceiling with GI grid suspended system of size 600X600mm standard section consisting of main runner 29X24.70X0.80mm, cross Tee 29X24.70X0.80mm and wall angle 22.2 X22.2X0.65, ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) incl 4 mm thick HPSC self textured design pre primered non asbestos fibre cement building boards fixed in repairs to false ceiling etc complete all as specified and as directed
S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed
M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed
S&F 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed
S&F 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed
S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '
S & F Sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed
M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately
M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately
M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc incl removing of debries exc 1.50 Km etc complete all as specified and directed.
M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed
Supply only liquid water proofing compound
Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed.
Taking up or down 25 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed.
Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed
S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.
As per item No 36 above, but for 25 mm dia of bore pipe
M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and directed
As per item No 38 above, but for except tanks
S & F 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 25 mm – 455 gms] .
S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
Dismantling of cast iron or reinforced / PVC (SWR) / concrete drain pipe up to 150mm dia incl fittings, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed
S&F 110mm PVC, SWR pipes, single socketed in any length with rubber rings joint fixed with wall complete all as specified and directed
As per item No 43 above, but for 75 bore pipe complete all as specified and directed
S&F PVC Branch Pieces double (double Y) equal or unequal of 110mm dia.
S&F PVC bends (any radius) of 110mm dia.
S& F PVC bends (any radius) of 75mm dia.
S&F PVC vent cowls of 110mm dia.
Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed
M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed
M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed
As per item No 51 above, but for on old Plastered surface of wall
M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed
As per item No 53 above, but for on Old Plastered surface of wall
M&L for preparing Old Plastered surface of ceiling and applying two coat of white wash etc complete all as specified as directed
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed
M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
M&L preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.
Wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes suitable for normal/modular concealed on walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :- (a) One light point controlled by one switch
As per item No 59 above, but for One fan point controlled by one switch/regulator
As per item No 59 above, but for One light point controlled by two way switch
As per item No 59 above, but for One 3 pin socket out let 5 Amps on independent board
As per item No 59 above, but for One 3 pin socket out let 5 A on same board
Wiring concealed completed with 2.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non metalic PVC conduit medium density ISI marked incl accessories concealed type run on walls / ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface concealed on wall with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc, incl provision of 2.5 sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and as directed.
M & L Sub main wiring complete with two runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 2.5 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and incl non metallic rigid PVC conduit and conduit accessories incl taking down old unserviceable submain wiring all as specified and as directed.
Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and incl non metallic rigid PVC conduit and conduit accessories incl taking down old unserviceable submain wiring all as specified and as directed. Note for Item No 2 to 8 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be paid separately in other items.
M&L for groove cutting in wall/floor and making good of distrubed wall/floor, painting of existing colour all as specified and directed by Engineer -in-Charge.
Fixing 20w LED Fittings complete with all accessories including taking out old fittings all as specified and directed.
Fixing LED batten suitable for indoor applications 10 W, 2 feet complete with all accessories including taking out old fitting all as specified and directed
Switch piano, flush button single pole, 5 Amps one way
Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks
Switch socket combination flush type 5 Amps 2/3 pin multipurpose.
Switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose.
S&F in replacement of stepped type electronic fan regulator flush switch / socket typpe all as specified and as directed.
S&F in replacement of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed
S&F in replacement of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed
S&F in replacement of MCB TPN 415 volts, 10KA 'C' curve 63 Amps complete all as specified and as directed
S&F in replacement of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.
Supply and fixing 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes & model
S&F Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.
S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed Make :- Havells/CG/ Bajaj.
S&F Exhaust fans AC single phase 230/ 240 V of size 250/280/300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make : Bajaj cat No : 70079, MAXX AIR or eqv in Make Havells/CGs/ Orient
Switch piano, flush button single pole, 5 Amps two way
Supply and fix 2 x 2 recess mounted LED lumiarie 36 watt white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission arcylic cover completed with all accessories all as specified and as directed.
B5BUILDING SOLUTIONS
Ashraya Nirman
OM CONSTRUCTIONS
M.VENKATARAMANAPPA AND COMPANY
Sangam Construction
Swarna Constructions
G K CONSTRUCTIONS
SCION ENTERPRISES
K. VENKATESH NAIDU
ADWITHI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .