Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.1 LAccepted-AOC 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L1 | Accepted-AOC Low | |
| 2 | L2₹59.8 L+₹2.9 L (5.09%)Rejected-AOC | L2 | Rejected-AOC High |
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
21 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHM(U)-79/2022-23 REPAIR/ MAINTENANCE TO FILTER BEDS, CALIFLOCULATOR INCL AREATOR WITH OTHER CONNECTED ACCESSORIES AT PUMPING INSTALLATION AND PERIODICAL MAINTENANCE OF UG SUMPS/ OH TANK INCLUDING RISING MAINS UNDER GE (U) CHANDIMANDIR
2023_MES_585769_1
CWE/CHM(U)-79/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chandimandir
Class C Category a(ii)
8 documents required · 8 mandatory
₹1,000
Yes
GE(U) Chandimandir
₹1.3 L
Yes
12 Jul 2023
14 Mar 2023
26 Apr 2023
14 Mar 2023
21 Apr 2023
7 Apr 2023
15 Mar 2023 - 22 Mar 2023
Amount
Supply and fix Ductile iron double flanged butterfly valves 16 inch (400 mm) nominal dia (bore), bronze bearings, teflon bushes, SS 304 retaining ring, EPDM seals complete with gearbox and hand operated wheel fitted / fixed in position, in replacement (including taking up / down old valve) installed at MDPH, complete all as specified and as directed. Make: Kirloskar/DVD Valves/Sant/Kartar as approved by GE.
Dismantling of existing 16 inch mechanical butterfly valve by gas cutting from exisiting MS pipe, breaking/ cutting of existing PCC flooring dismantling Joint and flange by welding, and shifting of unsv mech butterfly valve to civil work shop for repair of gear any type including lathe work, greasing, replacement of defected parts and refixing the same in its original position with and including necessary PCC work and testing etc complete all as specified and directed.
Supply and fix in repair cast iron non rising sluice valve, of size 100 mm bore with wheel SS spindle, flanged ends PN-1.6 ISI marked as per IS:14846/ 2000 and CI operating wheel including gasket, nuts, bolts and washers fixed in position complete all as specified & directed.
All as per item Sr No: 3 above but 150 mm bore complete all as specified and directed.
All as per item Sr No: 3 above but 200 mm bore complete all as specified and directed.
All as per item Sr No: 3 above but 300 mm bore complete all as specified and directed.
Supply and fix cast iron non return values 100 mm dia class PN 1:6 ISI marked with flanged ends complete including jointing materials like nuts, bolts and washers fixed/ fitted in position in replacement (including taking down old valve) complete all as specified and directed.
All as per item No 7 above but 150 mm dia complete all as specified and directed.
All as per item no 7 above but 200 mm dia complete all as specified and directed.
All as per item no 7 above but 250 mm dia complete all as specified and directed.
Material and Labour for dewatering of Clariflocculator unit having two concentric tanks circular in shape, of dia 30 mtr, depth 4 mtr by means of pump set of appropriate capacity and thorough cleaning of Clariflocculator unit including rubbing, scratching and taking out the silt, mud, sludge etc including vegitation from the unit and throwing it away at distance not less than 50 mtr, cleaning and disinfection of entire internal surface of the chamber using suitable cleaning agent/bleaching powder, cleaning of internal tubes using high velocity water jet complete all as specified and directed.
Notes: (a) Bailing out the entire water from the clariflocculator unit, cleaning of inlet line shall be part of the job. (b) Necessary T&P shall be arranged by the contractor by his own arrangement. (c) Connection members such as aerator, alum mixture chamber, inlet & outlet channels, supporting pillars, cleaning of tiles of channels, cleaning of area along the railing of clariflocculator shall be part of the job and no extra cost will be paid.
All as per item No 11 above but for 20 Mtr dia and 3.5 Mtr depth complete all as specified and directed
Supply and fix Ductile iron Foot Valve, PN 10, EPDM seals, SS weld overlay, with Galvanized steel filter, as per IS 4038 of size 150mm, fitted/ fixed in position in replacement (including taking down old valve) complete all as specified and directed.
Supply and fixing as in replacement Ductile iron double flanged butterfly valves 600 mm nominal dia, bronze bearings, teflon bushes, SS 304 retaining ring, EPDM seals complete with gearbox and hand operated wheel complete all as specified and directed. Make: Kirloskar/DVD Valves/Sant/Kartar as approved by GE.
Labour only for disconnection all contacts of the existing feeder pillars ,capacitor panels ,change over switch , motor termination complete and decarbonising of all contacts burnt and wornout out cable connections with new lugs and thimble of adequate size and checking for correct phase sequence and ampereage for running of motors and pumps complete all as specified and as directed. Note: i) Cost of lugs and thimbles are included in the job.(ii) Spares repalced shall be measured and paid separately under relevant items.
Supply only following : NOTES : For ser item No. 17 to 38
Line contactor, AC 3 duty, 415 Volts, 50 Hz, 80 Amps Make: ABB/ Siemens/ Schneider/BCH
Digital soft starter suitable for 40 kW motor, 3 phase, 415 Volts, 50 Hz including one spare power control board of digital starter - Make: Siemens/ ABB/ Schneider/BCH
All as per item no 18 above but 75 KW motor
All as per item no 18 above but 56 KW motor
All as per item no 18 above 45 KW motor
All as per item no 18 above but 25 KW motor
Independant Control supply transformer and fast acting semiconductor fuse of suitable rating for soft starter protection
LED indication lamp AC, 415 Volts , 50Hz for RYB, ON/OFF, trip
Push button OFF
Copper bus bars of suitable length & section not less than 15 x 10mm covered with coloured heat shrinkable anti track insulation tape of make Denson/ M-seal or equivalent of finished thickness not more than 1mm
Epoxy base post insulator
MCCB 3 pole, 160 Amps, 415 volts, 50 Hz, Icu- 36 kA, adjustable thermal & fixed magnetic release type
Multifunction digital meter compatible to measure current, voltage, power factor & frequency with 3 lines LCD display in 96 x 96mm flush mounted case, accuracy class 1.0
Resin cast CT 300/5A cast resin base set of 3
Resin cast CT 100/5A cast resin base set of 3
Capacitor of rating 12.5 KVAR
All as per item No.32 above but 10 KVAR
All as per item No.32 above but 8.5 KVAR
All as per item No.32 above but 5 KVAR
MCCB 3 pole, 60 Amps, 415 volts, 50 Hz, Icu- 36 kA, adjustable thermal & fixed magnetic release type
Digital Soft Starter 175 KW, 415V, 50Hz, AC complete all as specified and directed. Make: ABB Cat Part No: 1SFA898116R7000 / Siemens Cat Part No: 3RW4447-6BC$4 /Schneider Cat Part No: ATS22C48Q, BCH CAT No ASAB0430C/5/12/0
Pressure gauge analog for centrifugal pump of 100-225 HP as per sample complete all as specified and directed.
Supply and fix in replacement MCCB 4 pole, 400 Amp, Ics = 100% of Icu, 36KV, 415V with thermal magnetic release, adjustable thermal and adjustable magnetic setting complete all as specified and directed.
Supply and fix in replacement MCCB 4 pole, 250 Amp, Ics = 100% of Icu, 36KV, 415V with thermal magnetic release, adjustable thermal and adjustable magnetic setting complete all as specified and directed.
Material and labour for replacement of entire control wiring of star delta starter/ soft starter with 1.5 sqmm copper conductor PVC insulated cable complete all as specified and directed.
Supply and fix in repair MCB 3 pole 240V, 63 Amps, with 10 kA breaking capacity 'C' curve complete all as specified & directed.
Supply and fix in repair MCB 3 pole 240V, 40 Amps, with 10 kA breaking capacity 'C' curve complete all as specified & directed.
Supply and fix in repair MCB 3 pole 240V, 32 Amps, with 10 kA breaking capacity 'C' curve complete all as specified & directed.
Supply only perforated HDPE black pipes, as per IS: 4984, of PE 100 and PN 10/16 as applicable for outer wall thickness of pipe of size 125 mm outer dia, of approved colour with neccessary fitting as per manufacture complete all as specified and as directed. Make: Prince/ Diplast / Supreme as approved by GE.
Material and Labour only for removal of existing unserviceable filter media from filter bed of approximate size 8mtr (L) x 5 mtr (W) x 2mtr (D) filtration plant and disposal of unserviceable media/material from each filter bed to a designated place, distance not exceeding 50 mtr including dismantling of existing air blow-down piping system, dismantling of AC lateral pipes and header block tees, nozzles etc, cleaning and disinfection of entire internal surface of the filter bed using a suitable cleaning agent/bleaching powder, scrubbing the side walls to remove any form of deposit using a wire brush complete all as specified and directed.
Notes: (a) Only one number of Rapid Gravity Filter Bed is to be taken for overhauling at a time and the same will be done as per instruction and as directed by Engineer-in-Charge. (b) Prior to starting of overhauling of a filter bed, the required materials for overhauling should be in place. (c) Entire materials labour, Engineer, supervisor, plant & tools required for executing the work and for safety of persons deployed on the work shall be contractor’s arrangement and responsibility. (d) During dismantling, a joint inspection will be carried out by Engineer-in-Charge with contractor and the detail of the filter media layers will be drawn. The new filter media layers are to be placed as per the details drawn during the joint visit.
(e) Supply of all the materials of the Rapid Gravity Filter Bed for overhauling shall be measured and paid separately. (f) Contractor necessarily in presence of the Engineer-in-charge or his rep shall make video of complete process and photograph of each operation of removal of filter media without any extra cost to department and CDs and photograph thereof shall be handed over to the Engineer-in-charge. It will be pre-requisite for submission of RAR and final bills for work done.
Material and Labour only for fixing of existing serviceable and new header block tees, nozzles etc, HDPE perforated lateral pipes, air blow down system same as existing arrangement including filling of filter media in layers (as detail drawn during removal of media) in filter bed, spreading the media uniformly using appropriate tools complete all as specified and directed.
Note: (a) Supply of header block, HDPE perforated pipe, air blow down pipe, gravels & sand media and other PCC work shall be measured and paid separately. (b) The quoted rates shall be deemed to be inclusive of cost of welding work for jointing of MS pipes, jointing of HDPE pipes and other essential works for successful operation of back washing and air blow down system. (c) Each filter bed will be filled with approx 80 Cum of filter sand and gravel, the quoted rates shall be deemed to be included of labour charges. (d) After filling of rapid gravity filter bed there shall be test run and the filtered water shall be tested at NABL certified test laboratory and turbidity should conform to IS: 10500/2012 standards and the cost of same shall be included in rate quoted.
(e) The flow rate of the overhauled filter bed should conform to the designed flow rate of the water treatment Plant. In case, the turbidity does not conform to IS: 10500/2012 standards, the Contractor should be required to identify the fault and rectify the fault of the Rapid Gravity Filter beds at their own cost. (f) Contractor necessarily in presence of the Engineer-in-charge or his rep shall make video of complete process and photograph of each operation of filling of filter media without any extra cost to department and CDS and photograph there of shall be handed over to the Engineer- in-charge. It will be pre-requisite for submission of RAR and final bill for work done.
Supply only filter media comprising of graded gravel, in accordance with IS: 8419 Part-I, hard and preferably rounded with specific gravity not less than 2.5, free from clay, sand, loam and organic impurities of any kind, Acid solubility not more than 10.00 % for gravel sizes 10mm or larger and 5.00% solubility for gravel sizes smaller than 10mm, Particle size 25mm-40mm, complete all as specified and directed. Notes: Filter gravel shall consist of hard, preferably rounded stones with an average specific gravity of not less than 2.5 and shall be free from clay, sand, loam and organic impurities of any kind. The gravel shall not contain more than 2 percent by mass of thin, flat or elongated pieces (in which the largest dimension exceeds three times the smallest dimension) determined by hand picking. Gravel should be free from excessive amount of limestone or shells and acid solubility determined in accordance with procedure given in Appendix R of in IS: 8419 (Part-I)-1977 should not exceed the following limits: a) For gravel sizes 10 mm or larger: 10 percent solubility b) For sizes smaller than 10 mm: 5 percent solubility
All as per item No. 48 above but of particle size 12 mm-20 mm complete all as specified and directed.
All as per item No. 48 above but of particle size 6 mm-12 mm complete all as specified and directed.
All as per item No. 48 above but of particle size 3mm-5mm complete all as specified and directed.
Supply only filter media comprising of filter sand, in accordance with IS: 8419 Part-I, specific gravity not less than 2.5, uniformity coefficient less than 1.5, Silica content tested in accordance with IS: 2000, Any sample of filter sand shall not contain more than 5 percent by volume of impurities, such as clay, loam, silt, Loss in Ignition not more than 0.70 %, Acid solubility not more than 5.00 %, Particle size 1mm-2mm, complete all as specified and directed. Notes: Filter sand shall consist of hard, durable grains of silica and shall have a specific gravity of not less than 2.5. All grains of sand shall preferably be water worn. The minimum silica content in sand as determined by method given in 7 of IS : 2000-1962 shall be 90 percent. Any sample of filter sand shall not contain more than 5 percent by volume of impurities, such as clay, loam, silt, etc, in one hour settlement after shaking in water in accordance with procedure described in IS: 8419 (Part-I)-1977. The sand shall not contain more than 5 percent of acid soluble matter as determined by solubility test described in IS: 8419 (Part-I)-1977. The loss on ignition, which is a measure of the organic matter present in sand, and determined by the procedure given in Appendix C of in IS: 8419 (Part-I)-1977 shall not be more than 0.7 percent.
All as per item No. 52 above but of particle size 0.5 mm-0.8 mm complete all as specified and directed.
Notes: For item No 48 and 53 : The filter media shall conform to all the parameters mentioned in IS: 8419 Part-I and a test certificate in this regard from supplier and from an NABL accredited laboratory for each type of sample is to be submitted for approval of GE before incorporating in work. It will be pre requisite for submission as RAR and Final bill for work done.
Material and Labour only for washing, sieving/cleaning and drying of existing filter gravels of any size retrieved from at suitable place using appropriate method, for removing any kind of impurity, foreign particles, complete all as specified and directed.
Material and Labour Rubbing / scrapping and cleaning of lime/alum mixing units including cleaning of lime and alum mixing chamber complete all as specified and directed.
Material & Labour for properly cleaning and disinfecting clear water storage tank (Overhead RCC Reservoir) of capacity 1 Lakh Gallon at 17-25 meter height from ground level by mechanised water storage cleaning and disinfection process comprising six stage cleaning process as under :- (a) DEWATERING : Dewatering the tank with portable submersible pumps of adequate capacity. (b) SLUDGE REMOVAL : De-silting and removal of left over dirty water/ sludge/ mud with specially designed sucking unit non clogging pump for sludge removal. (c) HIGH PRESSURE CLEANING AND SCRUBBING : Cleaning of walls, ceiling and floor by high pressure water jet mixed with detergent / cleaning agent appropriate for tank cleaning having rotary as well as flat jets for effective cleaning of the nooks, walls and corners and then scrubbing for sticky stain (if required). (d) VACCUM CLEANING: Wet and dry vaccum cleaning for moping of all dirt particles and residual sludge present in the reservoir by industrial vaccum cleaner.
(e) ANTI BACTERIAL AGENT: Disinfecting the tank inner surface from all harmful pathogens by spraying non toxic, 100% biodegradable in nature, eco friendly, antibacterial agent certified by NTC, a Govt approved laboratory. Non toxicity as per OECD guideline 423 adopted on 17th Dec 2001. (f) RADIATION : Treating the inside tank by exposing the surface and space to ultra violet (UV) radiation having bactericidal wave length to kill any possible residual bacteria in the reservoir walls/floor/ceiling/space inside the reservoir .
All as per item No 56 above but over head reservoir (OHR) of capacity 2 Lakh Gallons.
All as per item No 56 above but over head reservoir (OHR) of capacity 3 Lakh Gallons.
All as per item No 56 above but over head reservoir (OHR) of capacity 1.5 Lakh Gallons.
All as per item No 56 above but over head reservoir (OHR) of capacity 0.50 Lakh Gallons.
All as per item No 56 above but over head reservoir (OHR) of capacity 0.10 Lakh Gallons.
Material & Labour for cleaning and disinfecting water storage tank (Underground/ semi underground water reservoir) of capacity 4 Lakh Gallons by mechanised water storage cleaning and disinfection process comprising six stage crystal clean process as under :- (a) DEWATERING : Dewatering the tank with portable submersible pumps of adequate capacity. (b) SLUDGE REMOVAL: De-silting and removal of left over dirty water/ sludge/ mud with special designed sucking unit non clogging pump for sludge removal. (c) HIGH PRESSURE CLEANING AND SCRUBBING : Cleaning of walls, ceiling and floor by high pressure water jet having rotary as well as flat jets for effective cleaning of the nooks, walls and corners and then scrubbing for sticky stain (if required).
(d) VACCUM CLEANING: Wet and dry vaccum cleaning for moping of all dirt particles and residual sludge present in the reservoir by industrial vaccum cleaner. (e) ANTI BACTERIAL AGENT: Disinfecting the tank inner surface from all harmful pathogens by spraying non toxic, 100% biodegradable in nature, eco friendly, antibacterial agent certified by NTC, a Govt approved laboratory. Non toxicity as per OECD guideline 423 adopted on 17th Dec 2001. (f) RADIATION : Treating the inside tank by exposing the surface and space to ultra violet (UV) radiation having bactericidal wave length to kill any possible residual bacteria in the reservoir walls/floor/ceiling/space inside the reservoir.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 3 Lakh Gallons.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 2 Lakh Gallons.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 1 Lakh Gallons.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 0.50 Lakh Gallons.
All as per item No 62 here-in-before but Underground/ semi underground jack well reservoir of capacity 0.10 Lakh Gallons.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 0.70 Lakh Gallons at Mansa Devi Pump House.
All as per item No 62 here-in-before but Underground/ semi underground reservoir of capacity 0.50 Lakh (Tarbaine ) Gallons at Mansa Devi Pump House.
Cleaning of semi under ground open Raw water sump by removing balance water taking out solid residual loose dirt , scales , muds,clay, fungus vegetation growth ,any other foreign material, scrubbing the complete inner surface wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and wiring in bold letter date of cleaning on outside surfaces of UG sump so thatdistinely visible of capacity 32,00,000 Glns, Cleaning the surrounding area of the reservoir to a distance of 3 mtrs apart all around its circumference incl cutting of grass digging out roots, filling holes, levelling of ground removing the deposited material to a distance not exc. 200 Mtr including Applying two coat of super quality lime to internal surface, 32 Lakh gallons capacity semi-under ground open sump at Main pump house at Chandimandir Mil Stn under GE(U) Chandimandircomplete all as specified and as directed. Note:- No T&P will be issued by the department for doing the above work, it shall be arranged and provided by the contractor Like Motor ,pump for dewaterning of water ,wire brush, Bleaching Powder, lime etc.
Cleaning of semi under ground open Raw water sump by removing balance water taking out solid residual loose dirt , scales , muds,clay, fungus vegetation growth ,any other foreign material, scrubbing the complete inner surface wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and wiring in bold letter date of cleaning on outside surfaces of UG sump so thatdistinely visible of capacity 100,00,000 Glns, Cleaning the surrounding area of the reservoir to a distance of 3 mtrs apart all around its circumference incl cutting of grass digging out roots, filling holes, levelling of ground removing the deposited material to a distance not exc. 200 Mtr including Applying two coat of super quality lime to internal surface, 100 Lakh gallons capacity semi-under ground open sump at Mansa Devi pump house at Chandimandir Mil Stn under GE(U) Chandimandir complete all as specified and as directed. Note:- No T&P will be issued by the department for doing the above work, it shall be arranged and provided by the contractor Like Motor ,pump for dewaterning of water ,wair brush, Bleaching Powder, lime etc.
M&L for carefully washing out settled mud,alum,flocculant etc from FlOCCULATOR , flaculator tank 12.19 dia 4.5 mtr depth including external channels, chambers and outlet etc. Drainning out complete waste water from tank by mannually or mechanical arrangment cleaning of bottom, all internal side walls, channel by using brooms, wiper or nylon brush ,up to satisfaction of Engr in charge. Applying one coat of super quality lime to internal & external surface.
All as per item No.72 above but flocculator 0.15 lakh gln capacity including lime & Alum mixing chambers 03 Nos, intake chamber complete all as specified and directed.
M&L for washing /cleaning of rapid sand gravity filter 02 Nos mannually by scrapping out upper layer (appx 10 cm) for removing forigen material/mud etc and cleaning side wall / tiles portion including flushing mud water by using valve & compressor. Aapplying one coat of white wash including laying fresh sand to makeup level of sand in filter bed up to required level which decrease due to daily backwashing of filter bed, complete all as specified and directed.
M&L for cleaning/ taking out sludge, soil, stones,grass etc from of open jack well drain 5.18 mtr dia 4.5 mtr depth and spreading/leveling outside 10 metre from drain including applying one coat of white wash at main filter pump house complete all as specified and directed.
Supply and fix glow signage boards with base frame in replacement made from angle iron and backside from ACP sheet 3mm thick with IP 68 protection LED module, good quality virgin monomer Acrylic sheet, 3 inch rising moulding of acrylic letter with 5mm sun board channel, including complete wiring with IP 68 protection, Each letter will be made with computer offset for having same letter style and type as approved by Engineer-in-Charge, complete all as specified and directed.
Material & Labour for treating the outer surface of RCC over head reservoir including all CI, DI & MS item of 1.00 Lakh Gallon capacity reservoir 17-25 meter height in following stage : a) Rubbing, scraping, repairing minor cracks and chipped off plaster and concrete with rich cement plaster, filling wall putty to give even end smooth surface of outer existing concrete, plastered or unplastered surface of over head reservoir including staging. b) Scrapping surface with sand paper of all CI/DI/MS item like inlet pipes, outlet pipes, overflow pipes, washout pipes, sluice valves, non return valves, air valves, gate valves, bracing, brackets, ladders, grills, railings and all surfaces of steel and iron item within the fencing area of the overhead reservoir. c) Providing two coats of exterior emulsion paint to surface prepared under sub para (a) above complete all as specified and as directed. d) Providing two coats of synthetic enamel paint to all mild steel, cast iron, DI items surface prepared under sub Para (b) above all as specified and directed.
All as per item No 77 above but of capacity 2 Lakh Gallons.
All as per item No 77 above but of capacity 3 Lakh Gallons.
All as per item No 77 above but of capacity 1.5 Lakh Gallons.
All as per item No 77 above but of capacity 0.5 Lakh Gallons.
All as per item No 77 above but of capacity 0.10 Lakh Gallons.
Material and Labour for area cleaning of water supply installation including clearing of vegitation, wild growth and trimming of grass etc in and around the water storage tanks, valve pits and installation compound and removing rubbish off the premises complete all as specified and as directed.
NOTES FOR ITEM No 56 to 83
Contractor will make alternate arrangement to make sure of water supply to consumer or cleaning of tank in alternate days to avoid hampering of water supply, the same will be done as per instruction and as directed by Engineer-in-Charge.
Entire materials labour, engineer, supervisor, plant & tools required for executing the work and for safety of persons deployed on the work shall be contractor’s arrangement and responsibility.
Before completion of work in each reservoir, writing letters or figures for date of cleaning and capacity of tank with synthetic enamel paint with black background & letters / numbers in white colour & words size 10cm height on tank with contractors name and due date for next cleaning shall be marked on the reservoir by the contractor without any extra cost to department .
All safety measure and procedure including insurance of deployed personals and to ensure safe execution of cleaning, disinfecting, radiation and finishing process of entire work shall be contractor's responsibility without any extra cost to department. The cost for the same is deemed to be include in the unit quoted rate by the bidder.
In case the work in each stage of cleaning, disinfecting, finishing etc is found carried out inferior to the contract specifications & provisions and the work is still found to be technically, hygienically acceptable, the work will be devalued and recovery from contractor shall be made as to be decided by the competent authority in terms of condition 46 of IAFW-2249 amended up to date.
Refer special conditions of the contract for recovery rate of water and electricity required for execution of the work, if supplied by MES.
No T&P will be issued by the department for doing the above work, it shall be arranged and provided by the contractor Like Motor ,pump for dewaterning of water , wire brush, Bleaching Powder, lime ,ladder up to 30 mtr /Scaffolding up to 30 mtr if required etc.
Necessary T&P , pumping set, Dewatering pump , Sludge Removal pump ,pipes etc shall be arranged by the contractor. Required safety equipments such as hand gloves, headgears, masks, gum boots, oxygen gas cylinders etc shall also be arranged by the contractor. Labour trained in cleaning of OHT, semi under ground/above ground water reservoir/tanks sumps shall only be deployed to carry out the above job. Entire responsibility for safety of the deployed labour shall be of the contractor and deptt shall not be responsible for any mishappening or any type of loss occured during the execution of above job. Unit rate quoted shall be deemed to include the cost of all the above factors and no extra payment shall be made for the same.
Bharat Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .