Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.6 LAccepted-AOC | L1 | Accepted-AOC Lowest amount received after reduction offered by lowest bidder | |
| 2 | L2₹38.5 L+₹2.7 L (7.57%)Rejected-AOC | L2 | Rejected-AOC Not Lowest |
Tender Value
Refer Docs
EMD Value
₹76,000
Closing Date
26 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
PROVN OF THREE ROOM WITH ATTACHED BATH ROOM AND TOILET FOR SECTOR JCO NEAR BLDG NO. P-110, P-116 AND P-119 OF CERTAIN UNIT UNDER GE KAMPTEE
2022_MES_565130_1
84752/E8
Open Tender
Civil Works
Item Rate
180 days
GE KAMPTEE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE KAMPTEE
₹76,000
Yes
31 Jan 2023
24 Nov 2022
27 Dec 2022
24 Nov 2022
26 Dec 2022
12 Dec 2022
24 Nov 2022 - 5 Dec 2022
Amount
(A) BUILDING
Surface dressing not exceeding 15 cm deep in soft/loose soil ,removal of shrubs ,vegetation ,tree roots if any ,getting out and removal to a distance not exceeding 50 mtrs , complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out , complete all as specified and directed.
All as per item No 1.02 here in above but each additional 1.5 m or part thereof in depth beyond the first 1.5m , complete all as specified and directed.
Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundation, mass concrete and filiings, complete all as specified and directed.
Material and labour for Use and waste of formwork to sides of concrete foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. for a rough finished surface of concrete, all as specified & directed.
Material and labour for providing RCC 1:1.5:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc, complete all as specified and directed.
All as per item no. 1.05 hereinbefore but to sides of columns, pillars, piers, posts and struts etc., all as specified and as directed.
Material and labour for providing RCC 1:1.5:3 type A-1 (nominal mix) as in columns and pillars etc, complete all as specified and directed.
All as per item no. 1.05 hereinbefore but to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work, complete all as specified and directed.
Material and labour for providing RCC 1:1.5:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.
All as per item no. 1.05 hereinbefore but to chullah hoods, chajjas, troughs and similar items including edges and similar work, complete all as specified and directed.
Material and labour for providing RCC 1:1.5:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed.
All as per item no. 1.05 hereinbefore but to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, complete all as specified and directed.
All as per item no. 1.05 hereinbefore but to the soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping, and similar works not exc 200mm thick flat & with fair finished surfaces of concrete etc., complete all as specified and as directed.
Material and labour for providing RCC 1:1.5:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement, complete all as specified and as directed.
All as per item No.1.16 herein before, but 6 to 8 mm dia TMT bars , complete all as specified and as directed.
All as per item No.1.16 herein before, but 5 mm dia and over upto and including 10 mm dia TMT bars as in stirrups, spacers and binders, complete all as specified and as directed.
Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.
Material and labour for brick work with subclass 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.
Material and labour for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.
Material and labour for Rendering 10 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 15 mm thick in CM 1:4 by using water proofing liquid compound as per manufacturer instructions on brick or concrete surfaces and finishing surfaces even & smooth without using extra cement. complete all as specified and as directed. Note: Water proofing liquid compound shall be measured and paid separately under respective item.
Supply only Liquid water proofing compound of approved quality, complete all as specified and directed.
Material & labour for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.
Material and labour for Moorum / red bajri brought from outside MD land as in filling under floors / pavings / berms, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering etc, complete all as specified and directed.
Material and labour for hardcore of gauge not exc 63 mm, broken stones or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered & rammed to a true surface, complete all as specified and directed.
Material and labour for 75mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor and similar location, complete all as specified and directed.
Material and labour for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor finished the surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour for providing cement concrete 1:2:4 type B1 (Using 12.50mm graded stone aggregate) in for cills,steps plinth courses, coping etc and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles (digital printed design) of size 450x350x7 mm on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10 mm thick screed bed in CM 1:4 all as specified and directed.
Materials and labour for scratch free light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed.
All as per item No.1.16 herein before, but as in skirting with 10mm backing in cement mortar 1:4, complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc, complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 mix type C2 using 20 mm graded stone aggregate as in plinth protection and surface to be finished fair and even including joints at every 2.5 m and at all corners filled with 85/25 grade bitumen and sand mixed in 1:2 ratio by weight complete all as specified and as directed.
Material and labour for preparation of new plastered surface and applying two coats of oil bound distemper over a coat of Primer over two coats of putty of not less than 2.0 mm thick, complete all as specified and directed.
All as per item No.1.35 herein before, but in ceiling, complete all as specified and as directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and as directed.
Material and labour for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tie bar complete confirming to Fe-410 -W (Gde-E-250)quality A etc, complete all as specified and as directed.
Supply and fix steel window with side hung shutters including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc, complete all as specified and as directed.
All as per item No.1.39 herein before, but without glazing bars, complete all as specified and as directed.
Supply and fix Steel ventilator with top hung shutter including hinges, with steel handle, steel tower bolt, peg stay, complete all as specified and as directed.
Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and as directed.
Material and labour for providing cement concrete 1:3:6 type C 1 (Using 20mm graded stone aggregate) as in fixing of hold fast, bed blocks etc includig necessary form work as required , complete all as specified and as directed.
Supply and fix flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30 mm thickness and both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed.
Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for door etc, as specified in SSR part-I, Sec-08, Clause 8.24(a), complete all as specified and as directed.
Supply and fix Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening, complete all as specified and as directed.
Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.
Supply and fix sheet glass ordinary quality, 3 mm thick and glazing with oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.
Supply and fix Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters, complete all as specified and as directed.
Material and labour preaparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
Material and labour for Preparation of newly wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
Supply & fix 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw / welded to frames etc complete all as specified and as directed.
Supply & fix 150 mm Extruded Aluminium handles fabricated type anodised etc, complete all as specified and as directed.
All as per item No.1.53 herein before, but 125 mm, complete all as specified and as directed.
Supply & fix 150 mm long aluminium, anodised barrel tower bolt of extruded section , complete all as specified and as directed.
Supply & fix 300 mm long and 16 mm dia Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed, complete all as specified and as directed.
All as per item No.1.56 herein before, but 250 mm, complete all as specified and as directed.
Supply & fix Towel Rail 20mm dia 450 mm length of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.
Supply & fix vitreous China squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe), complete all as specified and as directed.
Material and labour 110 mm dia PVC (SWR) 'S' / 'P' trap, including jointing with solvent cement, complete all as specified and as directed.
Supply & fix 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc , complete all as specified and as directed. Make : Prayag Cat No 501or technocommercially equivalent in Cera/ Jaguar.
Supply & fix Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern , complete all as specified and as directed.
Supply & fix Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste coupling, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe, complete all as specified and as directed.
Supply & fix pillar taps 15 mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nut screwed for iron pipes, complete all as specified and as directed.
Supply and fix PVC connection 15 mm dia, 450 mm long including PTMT check nuts on both ends, as in repairs, complete all as specified and as directed.
Supply & fix rotational moulded polyethylene three layered water storage tanks (cylindrical or vertical with closed top) 500 liter capacity hoisted and fixed in position, all as specified in SSR Part-I, complete all as specified and as directed.
Supply & fix 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed , complete all as specified and as directed.
Supply & fix 15mm bore Bib tap, cast copper alloy chromium plated, fancy type, with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed, as in repairs, completed all as specified and as directed.
Supply & fix stop cock /Angle cock fancy type chromium plated, screwed down, high pressure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe , complete all as specified and as directed.
Supplying and laying of 15mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and as directed.
All as per item No.1.70 herein before, but 20 mm bore, complete all as specified and as directed.
Supply & fix 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart , complete all as specified and as directed.
All as per item No.1.72 herein before, but 75 mm bore, complete all as specified and as directed.
Material and labour PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia , complete all as specified and as directed.
Supply & fix CP grating of size 100mm dia complete all as specified and directed , complete all as specified and as directed.
Supply & fix PVC cowl slotted vent cowl 110 mm size , complete all as specified and as directed.
Supply & fix in chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe , complete all as specified and as directed.
Material and labour Salt glazed stoneware drain pipes laid in trenches and jointed as specified of 150mm dia, complete all as specified and as directed.
Material and labour Concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete in PCC(1:3:6) type C-2, complete all as specified and as directed.
Material and labour for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 , complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
Material and labour for 10mm thick rendering in cement mortar 1:4 on concrete surfaces using with water proofing liquid @ 200 ml/50 kg of cement , complete all as specified and as directed. Note- Water proofing liquid will be measured & paid separately
Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall , complete all as specified and as directed.
Material and labour for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) , complete all as specified and as directed.
Material and labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface , complete all as specified and as directed.
Material and labour for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area , complete all as specified and as directed.
Material and labour for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including aluminium paint total 200 gram/sqm in two layers over membrane, complete all as specified and as directed.
(B) INTERNAL ELECTRIFICATION:
Material and labour point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-II) 1983 marked medium grade concealed in wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch Note: Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. Cable Make Finolex L&T, Legrand, Havells, Polycab PVC Conduit Make: Polycab, Anchor, Finolex
All as per item No. 2.01 herein before, but One ceiling /exhaust fan point controlled by one switch and regulator, complete all as specified and as directed.
All as per item No. 2.01 herein before, but One 3 pin 5 amp socket out point on the same board with other switches, complete all as specified and as directed.
All as per item No. 2.01 herein before, but One 3 pin 5 amps socket out let point on independent board, complete all as specified and as directed.
All as per item No. 2.01 herein before, but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and as directed.
Supply and fix ceiling rose surface type 3 terminal 5 amps, complete all as specified and as directed.
Supply and fix Modular switch one way 6A, 1 module, complete all as specified and as directed.
Supply and fix Modular switch one way 16A, module, complete all as specified and as directed.
Supply and fix step type (Socket Type) 2 module electronic fan regulator flush type on existing parabolic laminated sheet etc as required, complete all as specified and as directed.
Supply and fix Modular Socket 6A 2/3 pin combined 2 module, complete all as specified and as directed.
Supply and fix Modular Socket 6A/ 16A 2/3 pin combined 2 module, complete all as specified and as directed.
Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories, complete all as specified and as directed. Make : Cat LGLZPCX022XC of JAQUAR or techno commercially equivalent in Phillips/ Havells/ Polycab.
Supply and Fix Highly durable surface mounted 10 watts LED batten/surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with tube rod, driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories, complete all as specified and as directed. Make:- Cat LGL01x010xC of JAQUAR or techno commercially equivalent in Phillips/ Havells/ Polycab.
Supply & fix light fitting 9W LED bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with three core twisted flexible cable suitable size of 230V, 50HZ, complete all as specified and as directed. Make: Cat No: LBLK02X010XC of JAQUAR or techno commercially equivalent in Phillips/ Havells/ Polycab.
Supply and fix building security light LED 25 W with Lumen OP 1800 with driver with rated voltage 240 V. 50Hz, including mounting Gl (made out of 25 mm die light grade pipe 1.2 m bent two shape including Fl clamps nut bolts etc, complete all as specified and as directed. Make: Cat No. LPCRSRT25WLC of JAQUAR or techno commercially equivalent in Phillips/ Havells/ Polycab.
Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush surface mounting double door, complete all as specified and as directed.
Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series , complete all as specified and as directed.
Supply and fix MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and as directed.
Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth lead wire 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c both ways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage Induction motor, complete all as specified and as directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and as directed.
(C) EXTERNAL WATER SUPPLY: NOTE :- Items of earthwork such as Excavation, returning filling , removing etc shall be measured under relevant items here-in-before.
Supply and fixing GI tubing 25 mm bore medium grade including all fittings such as bends, elbows, tees, union etc., and fixed to wall/ceiling or laid in floors complete all as specified and as directed.
Supply & fixing 25mm bore Gun metal gate valve with Iron wheel head, screwed both ends for iron pipes or for Unions and fixed including taking down/ removing old unserviceable valve, complete all as specified and as directed.
(D) EXTERNAL ELECTRIFICATION: NOTE :- Items of earthwork such as Excavation, returning filling , removing etc shall be measured under relevant items here-in-before.
Supply and fixing Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe of size 50mm outer diameter and 38mm inner diameter with IS 14930 (Part-2):2001 and 6 mm thickness, laid in trenches/floors and fixed on walls/poles, with and including necessary fittings such as bends, sockets and other connected accessories etc., for laying of electric cables, complete all as specified and as directed.
Supply, laying & testing of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured earthed electric power cable (heavy duty) with aluminium conductor of cross sectional area 16 Sqmm, 4 Core.1100 Volts grade suitable for earthed system, laid in trenches / passing though GI pipe / fixed along wall / on pole complete all as specified and as directed. Note: Excavation and Earthwork GI pipe, sand cushioning cable cover for protection of cable shall be measured and paid separately under relevant item here in after.
M/s Rahul Traders
Bidder Name
M/s Rahul Traders
Devika Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .