Work no 5 Bulandshahr Nagar me vibheen sthalo per 11 Nag High must light lagye jane ka karya

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(SOR No.21.3.1/2024)

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/ UV stabilized PC cover and lenses built with with mandatory driver set suitable for 170 to 200 Watt. Confirming to IP 66,IK 07 and above protection complete in all respects including Labour. CAT- AAA (SOR No.23.26/2024)

Supply and laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100V grade in Existing RCC/Hume/Metal pipe as directed by the Engineer-Incharge, complete in all respect including excavation and refilling.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 Sq mm 3-1/2 Core (SOR No.20b.1.10/2024)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. 1X 1.5 sq.mm [DSR-1.17.1 /2025]

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. 4 X 4 sq.mm [DSR-1.17.22 /2025]

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Α ΤΡ&Ν [DSR-2.1.3 /2025]

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required [DSR-5.2/2025]

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)(DSR NO. 15.16.1/2025)