Loading
Loading…
Loading…
Tender Value
₹4.1 L
EMD Value
₹8,260
Closing Date
15 Jun 2026, 6:00 pm
Executive Engineer
EE PWD ELE DIV. BARAN
Variuos Electrification work in Distt. H.Q. Jhalawar
2026_CEPWD_564849_3
NITNO08/2026-27 EE PWD ELE DIV BARAN
Open Tender
Electrical Works
90 days
BARAN
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
AS PER TENDER NIT
₹8,260
Yes
EE PWD ELE DIV. BARAN
4 Jun 2026
4 Jun 2026
16 Jun 2026
4 Jun 2026
15 Jun 2026
4 Jun 2026
10 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Supplying and laying FR PVC insulated & unsheathed flexible copper conductor of following nominal sizes with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. | ||||||
| 1.01 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | 200 | Mtr | 142 | ₹28,400 | BI01010001010000000000000515BI0100001145 |
| 2Supply and Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. | ||||||
| 2.01 | 4.0 Sq.mm 3 core flat / Round | 20 | Mtr | 196 | ₹3,920 | BI01010001010000000000000515BI0100001147 |
| 3SITC of Single Stage, water cooled, High Speed (2880 RPM), Horizontal, Centrifugal, Openwell Submersible pumps set pre filled with coolent water and fitted with mechanical seal. The motor body of single phase pump shall be of SS and rest of all shall be of cast iron. Shaft of three phase pump shall be of SS 410 grade. All casting parts should be cathod electro deposition (CED) coated. Motor winding shall be 100% copper wire material. Dynamically balanced rotating parts to ensure min. vibration etc. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. | ||||||
| 3.01 | 7.5 HP, 3-Ø, (12 -32) Mtr, (1650-400) LPM | 1 | Each | 30,625 | ₹30,625 | BI01010001010000000000000515BI0100001149 |
| 4SITC of Monoblock closed coupled motor pump set with TEFC motor, motor should be IP55-F class and IE2 efficiency for monobloc, with carbon steel /SS-410 shaft, Mechanical seal, Single/Three phase Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively and Dynamically balanced rotating parts to ensure min. vibration etc. complete in all respect. | ||||||
| 4.01 | 2.0 HP, 1-Ø, (6-27)Mtr, (250-100) LPM ( Bronze impeller & CI Body) | 1 | Each | 17,363 | ₹17,363 | BI01010001010000000000000515BI0100001151 |
| 5SITC of IP20, 2'x2' LED Surface/ Recessed mounting backlit & SMD Mid power type LED Light fixture not less than 35 mm housing depth made from CRCA sheet steel housing, high purity / transmissivity UV stabilized Non -yellowish diffuser for uniform light distribution. operating voltage range 140-285 V, HV cutoff - LV cutoff should be 300-100V . High efficiency with 4 KV internal surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection ( input 320VAC-48 hoursprotection,input 350VAC-2 hours protection) (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) as required. | ||||||
| 5.01 | Minimum lumen output 4800 lm | 10 | Each | 2,265 | ₹22,650 | BI01010001010000000000000515BI0100001153 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.66 MB
Tendernotice_2.pdf
PDF • 0.46 MB
BOQ_1005322.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid