Renovation work of staff Toilets in Kendriya Vidyalaya Sangathan HQ

metres lead as per direction of Engineer-in-Charge.

Carriage of material by mechanical transport including loading unloading

1.1.1 Lime, murrum, building rubbish

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate MR Amount

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead.

Dismantling of cement concrete platform along with curtain walls and base

concrete etc. including stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead :

15.55.1 120x 120 cm (outside to outside) Each 5 1104.05 5520.25

15.55.2 210x 120 cm (outside to outside) Each 5 1693.35 8466.75

Dismantling W.C. Pan of all sizes including disposal of dismantled

14.82 materials including malba all complete as per directions of Engineer-in- Each 26 134.10 3486.60

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled

14.84 pipes (within 50 metres lead) as per direction of Engineer-in-Charge MTR 560 3.45 1932.00

Civil & Interior

Providing and fixing 18 mm thick gang saw cut, mirror

polished,premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing,moulding and polishing of edges to give high gloss finish etc.

complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red.

8.2.2.2 Area of slab over 0.50 sqm sqm 60 5136.30 308178.00

13.110.1 Old work (two oe more coat on existing cement paints surface Applied SQM 620 218.54 135494.80

1:4 (1 cement: 4 coarse sand) SQM 630 357.35 225130.50

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate MR Amount

Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid

11.41 on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing

with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with

white cement and matching pigments etc., complete.

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying : a) First layer of slurry of

cement @ 0.488 kg /sqm mixed with water proofing cement compound

@ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg/ sqm mixed with

22.5 water proofing cement compound @ 0.126 kg/ sqm. This layer will SQM 275.56 617.00 170020.52

be allowed to air cure for 4 hours followed with water curing for 48 hours.

The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and

IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides

21.1 with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall

be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing /

panelling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge. (Glazing,

paneling and dash fasteners to be paid for separately) :

Powder coated aluminium thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed

three layer or graded wood particle board conforming to IS: 12823 Grade

| Type Il, in panelling fixed in aluminum doors, windows shutters and

partition frames with C.P. brass / stainless steel screws etc. complete as

Pre-laminated particle board with decorative lamination on one side and

balancing lamination on other side

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate MR Amount

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodi

ccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed

to required colour or shade, with necessary screws etc. complete :

Providing and fixing stainless steel (SS 304 grade) adjustable friction

windows stays of approved quality with necessary stainless steel screws

21.11.2 etc. to the complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour or shade, with necessary screws etc. complete :

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10

11.48 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width

from 701 mm to 1000 mm), with double speed adjustment with necessary

9.84 accessories and screws etc. complete each 20 983.15 19663.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel

10.28 bolts etc., of required size, on the top of the floor or the side of waist slab KG 270 772.40 208548.00

with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate MR Amount

Providing and fixing bright finished brass hanging type floor door stopper

9.82 with necessary screws, etc. complete each 30 121.65 3649.50

4.20.2.2 Concrete of M15 grade with minimum cement content of 240 kg /cum

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions

by cutting a chase of appropriate width with chase cutter and embedding

8.1 the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as

per direction of Engineer-in-charge and finished smooth.

8.2.2 Granite Stone of approved shade SQM 29 4051.85 117503.65

Digitally signed by AMIT

Sanitary/Plumbing

S.No. Description UNIT QTY DSR RATE MR Rate DSR Amount MR Amount

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1

long with S.S. triangular plate to Eureopean type W.C. of quality and

as approved by Engineer - in - charge

17.7 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 38 mm single piece moulded with height of 270 mm, effective

length of tail pipe 260 mm from the centre of the waste coupling, 77 mm

breadth with 25 mm minimum water seal, weighing not less than 263

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions

18.21.2 45 cm length

Providing and fixing C.P. brass angle valve for basin mixer and gyser

points of approved quality conforming to IS : 8931

18.53.1 15 mm nominal bore each 76 574.30 43646.80

18.58 Providing and fixing PTMT grating of approved quality and colour

18.58.1 Circular type

18.58.1.1 125 mm nominal dia with 25 mm waste hole each 70 51.85 3629.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

18.8 cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.2 20 mm nominal dia Pipes metre 150 537.60 80640.00

18.8.3 25 mm nominal dia Pipes metre 290.82 627.25 182416.85

18.7.4 32 mm nominal dia Pipes metre 55 739.30 40661.50

Providing and fixing PTMT Waste Coupling for wash basin and sink, of

17.69 approved quality and colour.

Waste coupling 38 mm dia of 83 mm length and 77 mm breadth,

weighing not less than 60 gms

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate DSR Amount MR Amount

Providing and fixing floor mounted, white vitreous china single piece,

double traps syphonic water closet of approved brand/make, shape, size

and pattern including integrated white vitreous china cistern of capacity

17.81 10 litre with dual flushing system, including all fittings and fixtures with each 15 18212.90 273193.50

seat cover, cistern fittings, nuts, bolts and gasket etc including making

connection with the existing P/S trap, complete in all respect as per

directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S$ trap, 10 litre low level white P.V.C.

17.1 flushing cistern, including flush pipe, with manually controlled device each 13 6767.40 87976.20

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required:

Providing & fixing vitreous chinaware urinal comprising Large flat

back wall hung urinal in glazed vitreous China urinal 15 mm electrically

operated solenoid valve with infra red sensor mounted in a box with

SS Cover. CP brass chromium plated flush piping from solenoid

valve to urinal terminated with a 15 mm screwed spreader 32 mm

MR - 1 nominal bore CP cast brass waste 32 mm nominal bore CP cast bottle trap Each 13 26802.00 348426.00

with extension pipe rubber adopter for waste connection, CP brass wall

flange.For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality

17.22A & make as approved by Engineer in charge.

(a) 15 mm nominal dia Each 27 6940.75 187400.25

17.34 Providing and fixing toilet paper holder

Providing and fixing mirror of superior glass (of approved quality) and of

required shape and size with plastic moulded frame of approved make

and shade with 6 mm thick hard board backing

17.32.4 Rectangular shape 1500x450 mm Each 12 2093.00 25116.00

17.32.2 Rectangle shape 453x357 Each 2 1361.80 2723.60

Providing and filling the joints with spun yarn, cement slurry and cement

mortar 1:2 (1 cement: 2 fine sand) in $.C.1./C.1. Pipes :

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid

MR- 2 and bracketsfixed to wooden cleats with C.P. brass screws. Each 15 2870.00 43050.00

Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P.

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate DSR Amount MR Amount

Providing and fixing C.P. brass long nose bib cock of approved

18.50 qualityconforming to IS standards and weighing not less than 810 gms.

18.50.1 15 mm nominal bore Each 27 820.70 22158.90

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

of fittings and brackets, cutting and making good the walls wherever

White Vitreous China Wash basin size 550x400 mm with a 15 mm CP

Digitally signed by AMIT

S.No. Description UNIT QTY DSR RATE MR Rate DSR Amount MR Amount

1.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as

1.24 Supplying and fixing following modular switch/ socket on the existing

modular plate & switch box including connections but excluding modular

plate etc. as required.

DSR E&M LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 <

2025 120lm/Watt ) Supplying, installation, Testing & Commissioning of LED Recessed/

1.1 surface Down lighter (Round/ square/ Rectangular) SMD type of following body

material with PMMA and prismatic diffuser and construction as per IS : 10322 with

driver as per the requirement with Driver efficiency >85%, Operating voltage AC

140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection

,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker

free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends ,

CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM

(Standard Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be confirming to relevant BIS

standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name

Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c

connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable

and earthing etc. as required with Minimum 5 year OEM warranty. System lumen

1.5 Installation, Testing and Commissioning of exhaust

fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as

Digitally signed by AMIT