05- Vitiya varsh 2026-27 mai Zila Panchayat Shamli ke block Unn Mai Lepan margo ki Pench Marammat karya.

Supply of 22.4-53 mm gauge stone ballast and consolidation with hand rammer in patches i/c stacking, filling pot holes, watering, camage of water and blinding with stone dust @ 19% etc. complete as per direction of Engineer in charge.

Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface with hydralic broom as per technical specificaton clause 503.

Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause-301.5.

Supply of 22.4-53 mm gauge stone ballast and consolidation with hand rammer in patches i/c stacking, filling pot holes, watering, camage of water and blinding with stone dust @ 19% etc. complete as per direction of Engineer in charge.

Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface with hydralic broom as per technical specificaton clause 503.

Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades.