CIVIL WORKS

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH room walls

Carting of excavated earth/dismantled materials with a lead of 15 KM's including cost and conveyance of all materials and all labour charges, overhead and contractors profit etc., complete for finished item of work as directed.

Brick masonary in CM (1:3) with 2nd class bricks traditional size 23x 11x7 cm including c/c of all material and water to work at site cost of seigniorage charges and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc complete for finished item of work.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat ) SSR No TBSC-Q.VII-04

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work.( In toilets) (APSS No.701 & 707) -Toilets

Dadooing/ Cladding to walls with glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and finish in all shades and designs set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work. -GF

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having inimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer - in- Charge (SS butt hinges and SS screws shall be paid separately) SSR.No. TBSC-L.I-18 -GF

S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty (Jaquar Premium make ) SSR.No. TBSP-F.I-07

Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra-solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour SSR.No. TBSP-E.II-04

Supplying & fixing Bronze Vertical Check (Non return) valve as per IS-778 I-class heavy duty - 15 mm NB Size - TBSP-G.III-14

Supply & Fixing 40 mm nominal size dia PVC solid waste pipe outlet - TBSP-H.II-05

S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 - TBSP-F.IV-07

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 - TBSP-F.I-02

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock

S&F CP finish brass bottle trap 250 mm long with wall connection pipe & wall Flange - TBSP-F.VII-03

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm - TBSP-E.VII-03

Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30 mm 15 mm x 1.5 mm with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. TBSC-M.II-15

Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x 2.40 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Supplying and fixing Rectangular Mirror Frameless of size 609.6 mm x 914.4 mm - TBSP-J.I-42

Supply of 16" (400mm) BLDC 30 W Wall mounted Fan with service value 2.7 CMM/ Watt with all accessories etc., Makes : Atomberg / Crompton / Orient / Havells/Halonix / Goldmedal / GM. ELEC-5.1.9

Supply of 24" (600mm) Wall mounting / Pedestal Air Circulators Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / Goldmedal / GM. ELEC-5.1.10(b)

Supply of 18" (450mm) Wall mounting / Pedestal Air Circulators Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / Goldmedal / GM. ELEC-5.1.10(a)

TBSC-C.X-01 - Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards

TBSC-R.I-64 - Supplying and laying Engineered Wooden Flooring of thickness 14 mm and varying width (53 to 207 mm) reapers of varying length in tongue and groove shape, the edges of the boards with finger lock groove and the bottom side with air pass groove using good quality Engineered Wood comprising of top layer of 3-4 mm thick specie wood drawn and sawn from one piece of solid wood Oak, American Walnut, Burma Teak, Cumaru, Jatoba etc., and bottom layer of 12-15 mm is wooden, spruce or pine or plywood Tongue and Groove 4 Sides machined to a hundredth of a millimeter, with beveled tongue in a tongue & groove section for easy jointing including preparing the surface with 5 - 7 mm thick POP treatment, supplying 3 mm thick foam sheet and HDPE Plain Black Polythene Sheet, Tarpaulin Grade: GSM 150, Thickness: 100 Microns Sheeting to receive the wooden flooring

TBSC-K.IV-12 Supply and fixing of Cement Bonded Prelaminated Particle Board double skin partition using with 10 mm Cement Bonded Prelaminated Particle Board made out of G.I track section of size 50 mm x 35mm x 0.55mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm internals horizontally. The frame is fixed by means of self expansion screws and caps to the wall / roof. Cement Bonded Prelaminated Particle Board is to be fixed both sides of the frame work by using 2mm thick electro plated CR flat section leaving 3mm gap between two panels. The cost inclusive of cost and conveyance of all materials to sites, other materials incidentals and labour charges as per the direction of Engineer in charges.

TBSC-K.IV-13 - Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Prelaminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.

TBSC-K.IV-18 Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5- 7 microns thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be paneled with 9mm pre-laminated particle board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diametermine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket Centre mullions are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diametermine Monomer (EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter should be of 46x46mm and section for middle & bottom should be of size 23x130mm

TBSC-K.IV-19 Providing and fixing in position wall paneling to all heights with eco friendly light weight calcium silicate panels/tiles globe design of size 595x595mm having square/butt edge having NRC i.e. Noise reduction coefficient of 0.5 to 0.75 as per IS 8225:1987, Light reflectance of 85% minimum, Non combustible as per BS 476 part 4, fire performance as per BS 476 part 6&7, humidity resistance of 100% and thermal conductivity < 0.043 W/m K as per ASTM 518: 1991 comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50mm thick pressed section galvanizing @ 120 grams per sqm including both sides i.e. vertical studs of size 48x34x36mma re placed at 600mm center to center in a floor and ceiling channel section of size 50x32mm fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. Glass wool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13x3.2mm on to this grid leaving an even groove of 1mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide and tow coats of primer suitable for paneling as per manufacturers specification as per direction of Engineer-in- Charge with 15mm thick integral densified fully perforated light weight calcium silicate panels/tiles

TBSC-K.I-42 Providing and fixing of false ceiling with powder coated exposed GI gridsuspension system E Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c consisting of main runner 3600mm long, Cross Tee 1200mm/60mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c, The main runners to be placed @ 1200mm, Cross tee 1200mm will be inserted in the pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mm x 600mm. Additional cross tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mmx600mm shall be supported by 3mm dia GI wire from purlins/soffit.6mm thick High pressure steam cured non-asbestos fibre cement designer ceiling board density>1299 kg/m3, Modulus of rupture – 15.85 Mpa, Thermal conductivity – 0.0872 W/mK of size 595mm x 595mm confirming to IS 14862 and Type B category III of ISO 8336:1993, reaction to fire A2s1d0 tested as per EN13501 Part I and BS 476 part 4,5,6&7 should be placed in the Grid module to form a false ceiling. All complete as per drawing and directions of Engineer-in-Charge

Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e., Soil in contact with external walls around the building and Concrete or Masonry apronaround the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges etc for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.

RBR-TSRA-6 Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701MORD.

RBR-TSRA-6-ii Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces (excluding Primary Coat) as per Speciufication 803 MORTH

RBR-STCL-8 Dismantling Wood Work Wrought and Planed Fixed in Frames of Trusses upto a height of 5 m above Plinth Level as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m.

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,

White washing two coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Painting with Synthetic Enamel paints - One Coat - for New Wood Work, old wood work and new iron work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Painting with Synthetic Enamel paints -One Coat - For Old Iron Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Painting with Synthetic Enamel paints -Two Coats - for New Wood Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Painting with Ready mixed Synthetic Enamel paints - Two Coats - For Old Wood Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Painting with Ready mixed Synthetic Enamel paints - Two Coats - For New Iron Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Painting with Ready mixed Synthetic Enamel paints - Two Coats - For old Iron Work (Synthetic Enamel paints in all shades Grade - I Asian/ Berger/ Nerolac / Indocem/ PMCC/ ESSAR or equivalent)

Distempering, 2 Coats with Oil Bound Distemper

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stackingthem within 100 metre lead

Providing and applying Birla wallcare putty of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose materials ,applying emery paper ,sand the surface ,clean and wipe off loose dust ,applying putty by putty knife/muslin pad,air dry for 2 to 3 hrs,sand with 180 and 320 no ,emery paper for the surface preparation including cost and conveyance of all materials to worksite and all opeartional ,incidental,labour charges etc complete for finished item of work.( For internal walls)

Painting exterior walls with one coat of primer and two coats of exterior emulsion paint on new plastered concrete surfaces etc as per as per drawing and Technical Specification

BLD-CSTN-12-5: Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade -2 making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Supply of Venetian blinds Vertical blinds 100 mm wide with all accessories.

ELEC-1.5.7 Supply of 25sq.mm 4 core PVC / XLPE Insulated, Armoured Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes :Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Nakoda/ HPL / sudhakar / Bonton / Rajnigandha / Pawancab / South King