Quantum of work involved in shifting of 400 kva Transformer from thana cahuraha to anand ghat as per request of EO Nagar palika Gangaghat Shuklaganj unnao under EE Edd-II unnao (Againest Internal Resources 2023-24).

Amount

Carriage of Following material from elec. Store centre unnao to different work dump site along with loading , unloading and proper stocking distance as per indent.

STP Pole 11 mtr long

ACSR Weasal Conductor

ACSR Dog Conductor

L.T. Cable 3-Ph ABC(3X120+1X95+1X16)sqmm

Loose line mattrial store to dump site with loading unloding and proper stocking.

Supply and Fixing of Following materials

Stone Pad 300x300x75mm

LT Shackle Insulator

LT Clamp with Nut & Bolts

Holding Clamp for STP Pole 11 mtr. Long with Nut & Bolt

Stay clamp with Nut & Bolt

Alluminium Lugs 240/400 sqmm(for 250/400 KVA TF)

Flat Copper L pieces set 50X6 mm for LT bushing rod 250/400 KVA Distribution Transformer.

Stay Insulator

Erection of PCC/STP Double Pole (11 KV Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Grouting of Pole as per RESPO Norms with grouting materials.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

New Earthing for Distribution transformers one neutral and one for body of transformer 40 ft.deep GI pipe of size 40 mm. making all arrangements for its recharging funnel with openable cover of steel chequered plate with hinges and making connections to transformer neutral/body by GI strip of size 35x5 mm after complete running welding and connecting with pipes by clamps/nut bolts and welding.

Construction of T/F plinth, suitable for mounting of distribution transformer Size of the plinth will be 1.5 x 1.5 x1.2 meter (Size may varied as per site conditions) solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth.

Fabrication and erection of Distribution Transformer fencing of frame size 2.5x2 Mtr. Including cost of M.S. Angle size 35x35x5 mm and M.S. Flat size 35x5 mm, fixing of welded steel wire fabric on steel frames by welding of 10SWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust.

Laying stringing and sagging of O/H Three Phase 11 KV Line by ACSR Weasal Conductor including all associated work with joint/jumpers and binding of insulator with complete all work as required.

Laying stringing and sagging of O/H LT neutral single Line by ACSR Weasal /Dog Conductor including all associated work with joint/jumpers and binding of insulator with complete all work as required.

Laying stringing and sagging of O/H Three Phase LT Line by ABC (3X120+1X95+1X16) sqmm including all associated work with joint/jumpers and binding of insulator with complete all work as required.

Placement of following 11/0.433 KV Distribution Transformer from dump site to newly constructed T/F plinth and Installation cable termenation and commissioning of 250/400 KVA Transformer including drassing damaged cable, lugs ,Jumpering & connecting Earthing of body & neutral as per required. ( required mattrial as lugs, flat copper L plate, nuts & bolts etc for above job shall be provided by contractor)

Dismentalling,Carriage,Loading & Unloading of following Tf/materials from site to newly site/store with in 0-20 km :-

Transformer 400 KVA 11/0.4 KV with complete accessories

M/S PREM ELECTRIC ENGINEERS

M/S RATHORE ELECTRICALS