Dharam shalla at mankote near waski naag mandir

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA

Name of Work:- Construction of Dharam Shalla at Mankote near Waski Naag Mandir, Pyt. Duggan ,Block Duggan Divison REW Kathua Under CDS (MLA) for the year 2025-26. AMOUNT 6.00 lacs

Under Scheme :- CDS (MLA) 2025-26

Name of the Bidder/ Bidding Firm / Company :

S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Earth work in excavation by manual means in trenches for foundation, drains, pipes etc.--------- neatly dressed in A.K.O.S. cum 1000 Excess(+) Full Conversion INR

P/L in position dry stone aggregate of 40mm n/size cum 1000 Excess(+) Full Conversion INR

Random Rubble Dry stone masonry with hard stone in foundation and plinth including leveling . cum 1000 Excess(+) Full Conversion INR

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) cum 1000 Excess(+) Full Conversion INR

20mm thick cement plaster of mix 1:6 sqm 1000 Excess(+) Full Conversion INR

Making plinth protection 50 mm thick of C.Conc. M-10 over 75 mm thick bed of dry brick of 40 mm N/size of stone agg. sqm 1000 Excess(+) Full Conversion INR

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. sqm 1000 Excess(+) Full Conversion INR

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Second class Kail wood cum 1000 Excess(+) Full Conversion INR

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 1000 Excess(+) Full Conversion INR

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : Natural colour insulating board 12mm thick. sqm 1000 Excess(+) Full Conversion INR

Colour washing such as green blue or buff to give an even shade New work (two or more coats) with a basecoat of white washing with lime sqm 1000 Excess(+) Full Conversion INR

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work sqm 1000 Excess(+) Full Conversion INR

Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonals braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners, 25mm dia pulley, 40x40x5mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer . Using flats 30x5mm for diagonal braces and central cross piece sqm 1000 Excess(+) Full Conversion INR

Carriage of Sand & Bagri. 65Km by M.T and 1.0km by A.T an Avg. Distance from source to side of work cum 5377.52 1000 Excess(+) Full Conversion INR

Carriage of Stone 0.50km by A.T an Avg. Distance from source to side of work cum 1000 Excess(+) Full Conversion INR

Carriage of Stone agg. 40 mm n/ size 0.50km by A.T an Avg. Distance from source to side of work cum 1000 Excess(+) Full Conversion INR

P/F CIB ( Citizen informatio board )/ NAME PLATE including plaster, paint and photos all complete as per direction of Engineer- in-charge 1 no Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information