WIDENING AND STRENGTHENING OF ROAD IN INF QTR GD SM 280 TO TRG AREA IN PW DIV AT INF SCHOOL UNDER GE MIS MHOW

Amount

Excavating over areas, n.exc 1.50m deep and getting out soft/loose soil complete all as specified and directed.

Material & labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

M&L for Hard core of guage n.exc 63mm,deposited,spread and levelled in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and directed.

M&L for 7.5cm thick (compacted thickness ) WBM, with granite trap or basalt coarse aggregate of grading 2 ( 63mm to 40mm size) spread rolled and consolidated to gradient and camber requaired all as specified and directed.

M&L preparation of surfaces water bound macadam road surfaces by brushing with wire brushes for removing caked mud etc.sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc And applying evenly a priming /tack coat with using tentaic bituminiuos primer at 10 Kg per 10 Sqm complete all as specified and directed.

M & L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

M & L for preparation existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a primer/tack coat with using tetanic bituminous primer at 5 kg per 10 sqm and applying 30mm thick (consolidated Thickness ) premixed hot mix Asphaltic semidense concrete carpet using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix including rolling and consolidation to required gradient and camber complete all as specified and directed.

Note :- (i) Laying shall be done by means of self propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing complete all as specified and directed. (ii) Mix shall be obtained from hot mix plant. (iii) Cost of testing charges, materials and transportations shall be inclusive in the unit rate and no extra payment shall be admissible on this account.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.(Make Suneyes/Darkeye/3M.Alcolite/Solar)

S& F in repair to Solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm X125mmX 25mm (shank 65mm) of high efficincy mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battary (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 MCD completed as per manufactures instruction etc complete all as specified and directed. (Make Suneyes/Darkeye/3M.Alcolite/Solar)

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Meterial and labour for marking lines,dashes,arrows,letter etc. N EXC 15cm wide on bituminous surface with retro refluctive thermoplastic road marking paint with refluctor sing glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification of thickness 2.5-3.0 mm thick of white/golden/yellow as approved colour/shade and applied with machine as per manufacturer instruction including preparation of surface i.e cleaning of surface by removing all dust,dirt,oil grease etc complete all as specified and dircted

M & L for brick work with modular size burnt fly ash bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1;6 for finished even and smooth (without using extra cement) complete all as specified and directed.

S& F for 600mm size Reinforced concrete pipes class NP-3 laid and jointed complete with collars as directed by engineer in charge.

M&L for PCC(1:2:4) type B2 ( Using 40mm graded aggregate ) as in foundations,filling and mass concrete complete all as specified and directed.

Excavation in trenches n.exc 1.5 M wide and n.exc 1.5 M depth for foundation, etc or for shafts, wells cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan & n.exc 1.5M in depth & getting out in hard/dense soil, complete all as specified and directed.

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd. (BID ID -3152951)

Arpit Heights Private Limited (BID ID -3155672)