SPECIAL REPAIR TO BLDG NO. EWT-05 AND 7 (FARIDKOT HOUSE) AT THE RAJPUT REGT CENTRE FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed

M & L for 15mm thick rendering or brick work or concrete surface in cm 1:4 finished even & smooth w/o using extra cement complete all as specified and directed

M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work ceiling concrete surfaces to be finished even and fair complete all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed.

Material & Labour for Preparation of Newly Plastered surfaces of Wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 1mm thick weather proof wall care putty complete all as specified and directed. Note :- the work shall be executed through expert team manufacturer or auth applicator of manufacturer.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete all as specified and directed.

M&L for complete removal of existing treatment on old plasterd surface, preparation of old surfaces and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment on old plastered surface, preparation of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces over 1mm thick weather proof wall care putty complete all as specified and directed

M & L for preparation of old plastered surfaces of ceiling by washing, rubbing down and stopping of distempered and making surface smooth and applying two coats of white wash complete all as specified and directed.

M&L for 20 mm thick (average) plaster on roof in CM (1:4) with water proofing compound as per manufacturer instruction finished even & smooth w/o using extra cement including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,brushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as specified and directed

Supply only integral waterproofing compound complete all as specified and directed

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering complete all as specified and directed

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantaling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheeting in roof covering complete all as specified and directed

Fixing and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary repair to stop water leakage etc complete all as specified and directed.

Dismantling of framed timber scantlings n. exc. 40 sq. cm in section, as in fillets, rails, posts, rafters, purlins, etc. inluding wiremess fitted within it, complete all as specified and directed.

S & F in repair for Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, NOncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true orizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) cocmprising of main T runners of size 15 x 32mm of length 3000mm, cross - T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24x0.40mm of length 3000 mm to e fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications and drawing complete all as specified and directed.

S & F Anodised aluminium frame (powder coated of min thickness of 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and directed.

S & F Anodised aluminium decorative grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15 mm thick screed bed in cement mortar (1:4) in floorse etc complete all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor of shade & designed as approved by AGE(I), set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, over and including 15 mm thick screed bed in cement mortar (1:4) in floorse etc complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and inlcuding 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and fair without using extra cement, shade & design of tile as approved by /AGE (I) etc compete all as specified and directed.

M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to match with the existing surfaces as before complete all as specified and directed.

-ditto- all as per item ser No 34 above but exc 1.50 sqm but n.exc 4.00 Sqm complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and lengthcomplete all as specified and directed. Note - (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately)

Dismantling boarding as in kitchen cupboard,drawers, shutters including chowkhats etc. fixed with screws in any position complete all as specified and directed

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter as in Cup Boards of size plain 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F for 75mm Brass handles, cast type,polished bright complete all as specified and directed.

S&F for Steel ventilators , fixed type, complete with glazing bars/ gauzed portion dovetailed or welded etc complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F for Anodised aluminium (powder coated of thickness n less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, stainless steel butt hinges-03 nos on each leaf and 02 Nos handles on each leaf etc. complete all as specified and directed

S & F for aluminium anodised 75 x 75mm size diamond pattern 4mm thick grill including F/H section frame fixed with cadmium plated screw to window complete all as specified and directed.

M&L for 4.8 to 5.5mm thick glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note - (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges shall be paid separately)

S&F Aluminium anodized barel tower bolt of extruded sec 150mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 100mm long complete all as specified and directed.

S&F stainless steel butt hinges med weight 100mm size fixed with stainless steel screws complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs Stainless steel kitchen plate rack 900 x 600 and made out of 1 mm thick stainless steel sheet complete all as specified and directed.

S&F in repairs chromium plated grating doom 100mm dia with or without waste hole etc complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Dismantling water tanks of capacity exc 250 lit but n exc 500 ltr and removing to store complete all as specified and directed

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and directed.

M & L for disconnecting existing tanks exc 250 Ltr capacity but not exc. 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) etc complete all as specified and directed.

S & F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./25mm-455gms / 40mm - 690 gms) etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe and PTMT waste coupling complete all as specified and directed.

S&F in repair for PVC valveless, syphonic action type, flushing cistern 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, Plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan one piece type complete with soft closing cover white including fixing bolts and fixtures,P or S trap etc complete all as specified and directed.

S&F in repairs stop valve / angle valve bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.

S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose with or whitout swivel joint 125mm size with shower arm complete all as specified an directed

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs basin mixer 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

Taking up or down 25mm/32mm steel tubing and connections, including cleaning and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connectipons including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Fixing only tubes 15mm bore, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only tubes 20mm bore, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink complete all as specified and directed

S&F in repairs corner glass shelf 300mm with brass brackets complete all as specified and directed.

S&F in repairs CP brass tubular towel rail 20mm dia, D type, 60cm long between flanges alongwith brackets complete all as specified and directed

S&F in repairs CP brass towel ring complete all as specified and directed

S & F in repair Toilet paper holder flat recessed type of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thikness (below or above ground level) complete all as specified and directed.

M & L for 75 mm thick Cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) complete all as specified and directed.

M & L for providing prepolished chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete.

Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repair steel rolling shutters 1.25mm thick, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: , but gear operated type with chain wheel and hand chain , including locking arragement etc complete all as specified and directed.

S & F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F in repair for Ball bearing for rolling shutters complete all as specified and directed

M&L Preparing new surfaces of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed.

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes minimum 1mm thickness with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for One light/ holder/fan/exhaust fan point controlled by one switch complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

All as per item No.99 here in before but for One 5 pin 5 Amp switch socket combination point on an independent board complete all as specified and directed.

All as per item No.99 here in before but for One 5 pin 5 Amp socket point controlled by one switch on same board complete all as specified and directed.

All as per item No.99 here in before but for one 16 Amp 6 pin switch socket combination independent with 4.0 Sqmm FRLS unsheated copper conductor single core multistranded complete all as specified and directed.

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 15 Amp 5 Pin complete all as specified and directed

S&F fix electronic fan regulator 5 stepped type complete all as specified and directed.

S&F ceiling rose PVC / poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper each conductor shall be measured as one unit length.)

Supply and fixing of VTPN DB suitable for mounting MCCB as incomer of rating 100 AMP vertical distribution board 12 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed.

S&F of MCCB 100 Amp, 16 KA, 4 pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed.

S&F of MCB SPN 63 Amp, 240 volt 'C' curve complete all as specified and directed.

S&F of MCB SP 6-32 Amp, 240 volt 'C' curve 10 KA complete all as specified and directed.

S&F of LED light fitting 4 feet, 20 watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including dismentling complete all as specified and directed.

S&F of LED fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35 /36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M/S S P CONSTRUCTION (BID ID -3139491)

M/S WASEEM KHAN CONTRACTOR (BID ID -3145035)

M/S Shree Gopal Engineers & Contractor (BID ID -3143614)

M/S SRI JAGDAMBE TRADERS (BID ID -3140056)

kpenterprises (BID ID -3139562)

SIDDHIVINAYAK CONSTRUCTIONS (BID ID -3133964)

M/S SHRI RAM CONSTRUCTION AND SUPPLIER (BID ID -3146717)

M/s Moti Babu Agarwal (BID ID -3146500)

m/s udit constructions (BID ID -3139619)