Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹33.2 L+₹9,455 (0.29%)Rejected-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹35.5 L+₹2.4 L (7.39%)Rejected-AOC PO PS BUD BUD DISTT PURBA BURDWAN PIN 713403 | BUD BUD | PURBA BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹37.7 L+₹4.7 L (14.1%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹39.3 L+₹6.3 L (19.0%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹48.3 L
EMD Value
₹96,700
Closing Date
7 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_613102_1
8500-011/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹96,700
Yes
27 Oct 2023
10 Aug 2023
8 Sept 2023
10 Aug 2023
7 Sept 2023
24 Aug 2023
Amount
Excavation over areas n.exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for broken stone of boulders hardcore of gauge n.exc 63 mm deposited, spred and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed by Engr-in-Charge
M&L for Cement concrete (1:3:6) Type C2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge
All as per item No 5.00 above but 6mm to 8mm dia complete all as specified and directed by Engr-in-Charge.
M&L for formwork to sides of concrete, foundation, footings,bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work including vertical or to batter for rough finished surfaces of concrete complete all as specified and directed (Note: Only steel shuttering to be used for in formwork)
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-Charge (Note: Only steel shuttering to be used for in formwork)
M&L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge
M&L for RCC M-25 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed by Engr-in-Charge
M&L for brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed by Engr-in-Charge Make : ACC/Lafarge/L&T
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge
S&F Reinforced concrete pipes ,class NP2, 300 mm bore laid and jointed in trenches or in floors complete with collar all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as specified and directed by Engr-in-Charge.
S&F Reinforced concrete pipes ,class NP2, 450 mm bore laid and jointed in trenches or in floors complete with collar all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 450 mm bore complete all as specified and directed by Engr-in-Charge.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engr-in-charge.
M&L for Hand packing (size of aggregate 20mm to 63mm) at back of walls over arches etc. and raising (or lowering) to the required level with broken stone or boulders with loose filling of aggregates in back side complete all as specified and directed by Engr-in-Charge.
M&L for cast- in- situ cement concrete in Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height ,copings,apex stones,kerbs and the like including weathering ,slightly rounded or chamfered angles and throating as desired complete all as directed by the Engr-in-charge.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed. (Note: Only steel shuttering to be used for in formwork)
M&L for reinforced cement concrete (Design mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete as directed by Engr-in-charge.
Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil all as specified.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed. (Note: Only steel shuttering to be used for in formwork)
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster in CM (1:4) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC (WPC will be measured and paid separately).
M&L for providing precast cement concrete louvres and jallies, type B0 1:2:4 (using 12.5mm graded stone aggregate), 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item and set in CM (1:4) complete all as specified and directed
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50g and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
Supply only Integral Water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
S&F PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
ANIMA ENTERPRISE
M/S BHATTACHARJEE ENTERPRISE
M/S SENAPATI ENTERPRISE
INDIAN CONSTRUCTION
M/S GLOBE ENTERPRISE
JYOTIRMOY TRADING
subash chander bahl
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .