Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC | ₹48.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹48.5 LRejected-Finance N A | ₹48.5 L | L2 | Rejected-Finance Not Being Lowest |
| 3 | Rejected-Technical R O WARD NO 08 H NO 108 DHAR ROAD UDHAMPUR TEHSIL DISTT UDHAMPUR 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | - | - | Rejected-Technical Rejected due to solar rating of MoU firm not uploaded |
| Sl No | Description | Qty | Unit | SKYLIGHT INNOVATIONS L2 | SOLIZER ENERGYTECH PVT LTD L1 |
|---|---|---|---|---|---|
| 1.00 | Design Supply installation, testing & commissioning of "Solar Tree PV generation plant" of 10 KW capacity without battery backup, 3 phase 415 Volt AC output, Grid tied with Solar Mono Crystalline PERC Module of minimum rating 545 Wp with minimum 144 cells and minimum panel efficiency 20% with DCR norms shall be certified as per IEC 61215-Edition-II, IEC 61646 and IEC61730-1&2 open circuit voltage (Voc) 49.20, Short circuit Current (Isc) 8.6 Amp, Optimum operating Voltage (Vmp) 41.70 Volt & optimum operating current (Imp) 11.99 Amps including civil foundation work for Module Mounting Pole Structures, safty control device switches, SPD, array junction box induding string combiner box (SCB) with IP 65 complete including as folowing components:- | 2 | Per 10KW Each | 15,28,300 ₹30.6 L | 13,28,304 ₹26.6 L |
| 1.01Solar Photo Voltaic mono crystalline Silicon Modules for Capacity 10 KWp | |||||
| 1.02Civil and general works for foundation errection-01 Nos (Each 10 KWp Solar Tree Plant) | |||||
| 1.03RFID : Each PV module must use a RF identification tag mandatorily placed inside the module laminate, which must contain the following information: (i) Name of the manufacturer of PV Module (ii) Name of the Manufacturer of Solar cells (iii) Month and year of the manufacture(separately for solar cells and module) (iv) Country of origin (separately for solar cells and module) (v) I-V curve for the module (vi) Peak Wattage, Im, Vm and FF for the module (vii) Unique Serial No and Model No of the module (viii)Date and year of obtaining IEC PV module qualification certificate (ix) Name of the test lab issuing IEC certificate (x) Other relevant information on traceability of module as per ISO 9000 series. | |||||
| 1.04Solar PV module GI frame work and Dead Weight : Ballast type modular mounting structure, fabricated from pre coated mild Steel / hot dipped Galvanized Iron section for solar Tree Leaf Structure-01 Nos (Each 10 KW Solar Tree with 4 Branches with 4 leafs). Solar Structure shall be Non-corrosive & electrolytically, Anodise weather proof & dust proof as per Structural deign data complete all as specifed and as directed by Engineer in Charge. Note:- (a). Module mounting structure may require to be customized with respect to the site availability. (b)The contractor shall submit structural design on Stad- Pro based on Wind load of 200 kmph on the surface of the panel, live load and dead load of structure with solar panel & seismic zone III . Any deflection to the mounting structure shall be as per IS 800:2007 (c) Minimum thickness of galvanization should be at least 600 gsm. Test certificate of galvanization shall be submitted by contractor. | |||||
| 1.05Inter connection of Solar PV modules, connection to DC Control Box and Connection from DC Control Box to Inverter : DC cable single core 6 sqmm copper XLPE flexible conductor cable conforming to relevant IS weather proof, UV resistant, rated voltage 1100V grade including suitable type of copper lugs, suitable required qty of male & female MC4 connectors (M-10, F-10) & joints etc including Aluminim raceway for cable, complete as specifed and directed. | |||||
| 1.06DC Control Box -1 No .Supply, fix and testing of DC control box/junction box, with mounting holes, Mounting Screws of required qty, for 10 KWp (AC) ,weather proof (IP - 65) suitable for outdoor duty with and including suitable rating of MCB breakers, string fuses with base ,copper bus bar, voltage grade 1100V etc for combining solar PV module output complete all specifed and as directed. | |||||
| 1.07String Grid Invertor 01 Nos: Grid tie Solar string Invertor unit of capacity 10 KWp (DC to AC 415 volt at given load condition, Three phase system),wall mounted, with efficiency not less than 97% conforming to IEC 600682-2/VDE standards with multifunctional LED indications with alarm LED/LCD digital display system with following specification complete .- 01Nos (i) Nominal voltage: 415V, +/- 10% 3phase 50Hz (ii) Microprocessor /DSP micro controller system (iii) IP65 (outdoor) Protection enclosure (iv) Grid frequency synchronization +/-3% range (v) No load losses<1% of rated power (vi) Ambient temperature 4°C to 60°C. (v) Conforms to IEC 62116 for Anti Islanding Protection. (vi) Internal protection features against any fault in feeder line and lightening fault in feeder. (vii)Protection features- Inverter should have following protections (a) Anti islanding (b) Over voltage protection (c) Over current protection (d) Over temperature protection (e) Reverse polarity Protection (f) Surge protection (g) Short Circuit (h) Frequency change (viii) MPP Trackers (ix) No. of Inputs: minimum 6 (x) Total Harmonic Distortion < 3%. (xi) Power Factor >90%. (xii) Inverter should be capable of synchronisation with grid supply. (xiii) Should have necessary support for Remote Monitoring System (RMS) Data logging system complete in-built with inverter (RJ45 port). | |||||
| 1.08Note:- If Grid tied Solar Invertor capacity as specified is not available then the same of higher capacity as available will be provided at no extra cost by the contractor. | |||||
| 1.09RF based Anteena for wireless Communication: Supply, Installation, Testing, Commissioning and Programming of Omni or Bi Directional Parabolic antenna with control station to generate strong directional effect with WLAN network support having mast mounting arrangment. Control station should operate on license free frequency with necessary hardware at a suitable location to be connected to the central scada server so as to establish connectivity with every station of the network after conducting a frequency survey of the entire area of interest and identify suitable locations to mount the station hardware and the height of the antennas to establish clear line of sight either directly or by multi hop so as to be able to send data Antenna type:- Omni or Bi Directional Parabolic antenna Frequency Range-2402-2472MHz Or 5150-5970MHz as requirement. Peak Gain:-17dBi or 25 dBi as per site requirement. Degree of protection:- IP55 Note:-1) Rate quoted is deemed to be included for making arrangemets of accessories such as mounting bracket and mast clips. 2) The Programming, Testing & Commissioning of Wireless Antenna, e.g. Building wireless network etc. shall be carried out by certified SCADA & Automation Integrator. The programmer shall submit a letter from the Integrator as proof of his being as a authorized repersentative of Integrator. The programmer shall also submit a signed report on original letterhead of the Integrator that programming, testing & commissioning has been carried out by him. 3) Number of Antenna should be as per site requirement and directed by Engineer-in-Charge. | |||||
Updated dates
Tender Value
₹43.0 L
EMD Value
₹86,100
Closing Date
15 Nov 2025, 6:00 pmClosed
Col Neelima CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN SOLAR WATER HEATER/PLANT/TREE AT BLDG NO. P-59 AT UDHAMUR UNDER GE (UTILITY) UDHAMPUR
2025_MES_729660_2
CWE/U(U)-48/2025-26
Open Tender
Miscellaneous Works
180 days
UDHAMPUR
AS PER NIT
6 documents required · 6 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹86,100
Yes
4 Feb 2026
21 Oct 2025
17 Nov 2025
21 Oct 2025
15 Nov 2025
28 Oct 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
2ndCall_48.pdf
Tender Documents • 1.77 MB
BOQ_824362.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
