Renovation of Ground floor Conference hall at Pallavan House.

Amount

Labour charges for Removing the False Ceiling without damaged Ac unit ,wall panelling, ceiling plastering complete complying with standard specification and as directed by the departmental officers.

carpenter 1st class

carpenter 2nd class

Mazdoor 1st class

Labour charges for chipping the damaged ceiling and wall plastered surface complete complying with standard specification and as directed by the departmental officers.

Stone Cutter-1st Class

Labour charges for Removing door with frame and door closer fixing with door and cupboard alteration work complete complying with standard specification and as directed by the departmental officers.

carpenter 1st class

carpenter 2nd class

Labour charges for clearing the debries and cleaning the site complete complying with standard specification and as directed by the departmental officers.

Mazdoor 1st class

Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specification.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Five M-Sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating, erecting and fixing new GYP Board sheet 10mm thickness of approved quality including cost of GI channel frame and hanging work metal screws,star screws paper tape,jointing components False Ceiling upto a ceiling height of 4.5m from floor level complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating, erecting and fixing Perforated (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level complete complying with standard specification and as directed by the departmental officers.

Putty Two coat of plastered wall and ceiling surface with Asian wall putty of first class quality including thorough scrapping with finishing of smooth surface Labour with material wherever required etc., complete complying with standard specification.

Painting two coats of plastered wall surface with ready mixed Royal Shyne paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.(The colour and shade of the Royal shyne shall be got approved by the Executive Engineer before use of work).observed data

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.(The colour and shade of the emulsion shall be got approved by the Executive Engineer before use of work).

Supplying and fabricating and placing in position of Flute wall panelling using drilling machine with neat straight alignment etc.,after finishing the frame work and fixing with single side 12mm thick Hi-density anti termite water proof plywood over designed flute panel of best and approved quality with necessary star screws and also cutting the partition for electrical switch box and AC plug Box and telephone box requirements and finally neat finishing etc,complete.the rate is inclusive of cost of material,labour charges aluminium frame work,partition work etc., complete and as directed by the departmental officers etc.,complete complying with standard specification.

Supplying and fabricating and placing in position of mica sheet wall and wooden doors using drilling machine with neat straight alignment etc.,after finishing the frame work complete and as directed by the departmental officers etc.,complete complying with standard specification.

Supplying and fabricating and placing in position of PVC cupboard doors including cost of inches,handle,with necessary fittings complete complying with standard specification.(The colour and shade of the PVC cupboard shall be got approved by the Executive Engineer before use of work).

Hydraulic Floor Springs of various sizes, Double Action Hydraulic Floor Spring of approved quality, brand, manufacture as per BIS Standards for doors including cost of cutting floors as required, embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capable of taking up to 130 kg. weight from door shutter, like HARDWYN make (U-32) or its Equivalent with ISI monogram

Basic total

SEETHARAM CONSTRUCTION COMPANY (BID ID -1363388)

V SRINIVASAN (BID ID -1363864)