REPAIR TO JOINERY PLINTH PROTECTION HARDSTANDING FLOORING AND PATH AND REPAIR TO LEAKAGE SEEPAGE INTERNAL WATER SUPPLY AND PLUMBING AND PERIODICAL SERVICES AT AF STN DADRI

Amount

Taking down chowkats or frame n.exc. 1.50 sqm each with shutters (with out taking off shutter from the frame) and removing from the site complete all as specified and directed by Engineer-in-Charge

All as per Sl item 1 above but exc 1.50 sqm and n.exc 4.00 sqm each complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description n.exc. 1 sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge

All as per ser item 3 but exceeding 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge

S&F IInd class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints and fixed complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick Factory made second class hard wood (rail & style) factory made plain framed panelled shutter any nos of panels with lock rail and panels of 12 mm thick veneered particle board with commercial veneering on both faces the size of rail and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete complete all as specified and directed by Engineer-in-Charge

S&F 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thick ness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick factory made second class hard wood factory made glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in IS-1003 supplied and fitted to the chowkats complete all as specified and directed by Engineer-in-Charge

All as per Sl, item 8 above but 30 mm thick divided in to square with plain chamfered or rounded mitred and rounded rebated sash bars any members in window complete all as specified and directed by Engineer-in-Charge

S&F mild steel framed work as in door chowkats , shutters of angles or other section with gusset plates, rails, braces etc complete drilling welding for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges for steel door fittings (exclusive of steel sheeting or other covering running rails or guides) and hanging also fastening and fixing complete ((Fe-290-Gde-165) complete all as specified and directed by Engineer-in-Charge

S & F in repairs steel window & supply and fixing steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with guard bars glazing dovetailed or welded complete all as specified and directed by Engineer-in-Charge Note :- Shape and design of the window will be as per the exisiting window, until and unless mentioned otherwise in the tender documents.

S & F Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe-290 Gde- E-165 complete all as specified and directed by Engineer-in-Charge

S&F mild steel plain black sheet 1.25 mm thick as in covering to doors shutter/steel gates etc, cut to size edges bended holes punched, including round headed screw, or rivets and fixed to wood or steel members, etc with plain 40mm lap joints or welded/ reveted seems including bending, turning up, mitred. angles, stopped ends out lets etc. as required complete all as specified and directed by Engineer-in-Charge

M&L precast cement concrete type-B1 1:2:4 by using 20 mm graded crushed broken stone aggregate, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings set in cement mortar 1:4 or as per directed by Engr-in-Charge.

S&F MS barrel tower bolts stove enameled black with bright bolt – 150mm long fixedcomplete all as specified and directed by Engineer-in-Charge

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed by Engineer-in-Charge

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and incl. a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 250 mm long complete all as specified and directed by Engineer-in-Charge

S&F MS pressed handles oval type stove enameled black fixed – 150mm size complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge

M&L preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass,n.exc 0.5 sqm area each (any thickness, size, quality or description) from metal frame inclulding punching or drilling out old glazing pins / spring clips providing fixing new ones complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty / wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge

S&F figured glass 3 mm thick pin headed type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge

S&F forsted/tinted 5.5 mm thick ordinary quality and fixed with Aluminium glazing clips, Rubber Beading and with oil putty / wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge

S&F in repairs galvanized galvanised steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed including a coat of French blue paint complete all as specified and directed by Engineer-in-Charge

S&F in repairs Stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned teaks galvanised wire staples fixed including a coat of French blue paint complete all as specified and directed by Engineer-in-Charge

S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed & repair complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminium frames and shutters for doors,windows,ventilators & partitions with one or more rebates including jointing cleat for fixing and suitable aluminium poweder coated handles, tower bolts and door stopers etc. complete all as specified and directed by Engineer-in-Charge NOTE:- Floor spring/door closer ,Glazing& panelling shall be measured and paid separatly

S&F Mortice lock aluminium size of 75 mm all as specified and directed by Engr-in-Charge

S&F in repairs aluminium pivet with plate size 25 mm x 65 mm and sutable for shutter of 30 mm thick complete all as specified and directed by Engineer-in-Charge

S & F in repair rubber beading to be fixed over glass panes in Aluminium doors complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair aluminium anodised glazing clip to the aluminium door frames after fixing the glass panes complete all as specified and directed by Engineer-in-Charge

M&L for in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

Taking down old aluminium door shutters includig floor spring of shutter size exc.1.5 sqm but not exc.4.00 sqm and includig overhauling/greasing of the floor spring and pivot replacement of glass pane/rubber gasket/aluminium glazing clip if necessary including necessary screwing and adjustment etc and refixing in same location complete all as specified &directed. Note:- Glass pane/rubber beeding/aluminium beeding will be measured and paid seperatly under subsequent items complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Supplying & Fixing in opening as per specification and drawing,incl making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and directed by Engineer-in-Charge

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed by Engineer-in-Charge

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed by Engineer-in-Charge

S&F 150 mm aluminium anodised handles cast type complete all as specified and directed by Engineer-in-Charge

S&F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair 18/19 mm thick block board grade two quality interior grade, commercial type fixed with screw or nails to timber frame work as cup board shelves / partition / drawers complete fixed in repairs exposed edges of block board to be provided with 6mm thick teak wood lipping all around complete all as specified and directed by Engineer-in-Charge

S&F in repairs 25 mm thick Prelaminated particle, board, exterior grade, prelmainated one side with deocrative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge

M & L for 9 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to timber frame work in cup board shutters/ shelves and in partitions complete all as specified and directed by Engineer-in-Charge

S&F in repairs Ist class hard wood beads straight (any size) for glazed or gauged joinery including mitres etc all as specified and directed and removing old beads from site complete all as specified and directed by Engineer-in-Charge

S&F hasp & staple, safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screw 75 mm size complete all as specified and directed by Engineer-in-Charge

S & F 100mm stainless steel butt hinges medium weight complete all as specified and directed by Engineer-in-Charge

S&F Bross sliding door bolts with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on staple plate in wooden shutters and welded/riveted in steel shutters (200 mm long) complete all as specified and directed by Engineer-in-Charge

S&F butt hinges Brass 100 mm size complete all as specified and directed by Engineer-in-Charge

S&F Brass handles of 150 mm size complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass barrel tower bolts size of 150 mm , with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge

S&F joist channel angle, tee section, MS pipe, MS square tube ,bars , MS plate fixed in purlin rafter cleat, support etc incl welding, riveting etc conf to Fe-290 Gde E-165 all as directed by Engr-in-charge

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings etc complete all as specified and directed by Engineer-in-Charge

S&F Pre painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge hip, valley of roof covering fixed with self tapping screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, molding/folding in circular/semicircular of any position and height fixed with self tapping screws as specified, As directed by Engr-in-charge

S&F in repair curtain rod Stainless steel 25 mm dia 1mm thick with pairs of fixing fancy brackets, stops, rollers etc complete all as specified and directed by Engineer-in-Charge

Rssecuring or Easing of door shutters of any description exc 1 sqm and n. exc 2 sqm for easy closing/opening tighting of hinges or changing the position of hinges, adjustment of tower bolts with new screws etc and fix same without any extra payment complete all as specified and directed by Engineer-in-Charge

Resecuring or Easing of door shutter/sliding type of any description exc. 2 sqm for easy closing/opening tighting of hinges or changing the position of hinges, adjustment of tower bolts with new screws applying greasing in slider etc complete and fix same without any extra payment complete all as specified and directed by Engineer-in-Charge

Taking up or down steel water tubing and connection incl cleaning for refixing or removal to stores for following bore complete all as specified and directed by Engineer-in-Charge :- (a) 15mm

All as per item No 59 but 20mm complete all as specified and directed by Engineer-in-Charge

S&F GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor in following bore of tube complete all as specified and directed by Engineer-in-Charge :- (a) 15mm

All as per item No 61 but 20mm complete all as specified and directed by Engineer-in-Charge

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc complete all as specified and directed by Engineer-in-Charge (a) 15 mm dia

All as per item No 63 but 20 mm dia complete all as specified and directed by Engineer-in-Charge

S&F in repair small fittings of galvanized iron heavy grade such as socket, elbow , nipple of different Tee, chuknet of any size, union reducer, Float valve etc for 15 mm bore 20 mm bore pipe complete all as specified and as directed by Engineer-in-Charge

S&F in repair Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed in repair and all as specified and directed by Engr-in-Charge (a) 20mm

All as per item No 66 but 25mm complete all as specified and directed by Engineer-in-Charge

S/F in repairs 15 mm angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed by Engineer-in-Charge of Make- Jaquar or Equvlent.

S/F in repairs 15 mm two way angle valve chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and directed by Engineer-in-Charge of Make- Jaquar or Equvlent.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge as per SSR Pt- I

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge as per SSR Pt- I

S& Fix in repair 15 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair and all as specified and directed by Engr-in-Charge

S&F in repair 20mm bore Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair and all as specified and directed by Engr-in-Charge

S&F in repair 15 mm bore concealed stop cock with adjustable wall flange cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge :

S & F in repair 15mm chromium plated swivel shower rose with or without swivel joints sny size for fixing with 15 mm pipe incl shower arm 15 mm size , 195 mm long with bend of 45 degree complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash basin white flat back size 550x400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed by Engineer-in-Charge

S&F PVC connection 15 mm bore 450 mm in length complete all as specified and directed by Engineer-in-Charge

S&F in repair sinks with out drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste pipes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed by Engineer-in-Charge

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge

S&F in repairs for waste fittings,brass,chromium plated of 32 mm dia for wash basins complete all as specified and directed by Engineer-in-Charge

S&F in rapairs waste coupling of 32 mm bore(half or full threaded)suitable for wash basins complete all as specified and directed by Engineer-in-Charge

S&F in rapairs waste coupling of 40 mm bore(half or full threaded)suitable for wash basins/sink complete all as specified and directed by Engineer-in-Charge

S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed by Engineer-in-Charge

S&F in repairs of pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts complete all as specified and directed by Engineer-in-Charge

S/F in repairs 15 mm bore bib taps chromium plated cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge : Make- Jaquar or Kohler or Parryware.

S&F in repair vitreous china EWC with 10 litre capacity flush tank (Twin flush) monolathic with WC, coloured including coloured PVC hydraulic seat cover fixing bolt, necessary cutting diversion, opening in wall & floor etc complete as directed of approved/ standard quality complete all as specified and directed by Engineer-in-Charge : Make – CERA, Jaquare or equivalent

S&F in repair vitreous China wash down water closet (EWC) pedestal pattern coloured incl P or ‘S’ trap coloured ,seat cover & cement concrete bedding complete all as specified and directed by Engineer-in-Charge

S&F in repairs for Vitreous China squatting pan,"Orissa" pattern,size 580 X440 mm white,withintegral foot rests (excluding flushing cistern and flush pipe) including connection to flushing pipe anti syphonage pipe etc complete all as specified and directed by Engineer-in-Charge

S&F PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC flush bend 32mm dia with two Nos check nuts for conencting low level flushing cistern to European type water closet or India type water closet incl cement joint complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous China urinals, Half stall type white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engineer-in-Charge

S&F in repair vitrous china Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed by Engineer-in-Charge : Make Hindware/Perryware or equilent.

S&F in repair Brass CP mixer for WHB/Sinks mixing hot & cold water screwed down ofr iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

S&F in repair health faucet with double lock 1 meter brass plated stainless stell flexible hose and wall hook complete all as specified and directed by Engineer-in-Charge

S&F in repair CP jet spry with all fitting and fixture for EWCs of Make- Jaquar or equvelent complete all as specified and directed by Engineer-in-Charge

Cleaning and removal all scale and dirt, etc, from tanks and mouth of circulating pipes, etc exc 250 & n.exc500 litres capacity complete all as specified and directed by Engineer-in-Charge

Cleaning and removal all scale and dirt ,etc ,from tanks and mouth of circulating pipes ,etc exc 500 & n.exc 1000 litres capacity complete all as specified and directed by Engineer-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge

M&L for coloured printed non skid tiles area of each tile exceeding exc 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed with neat cement slurry pointed with colour cement to match the floor, and including 15 mm thick screed bed cement mortar in CM 1:4 and including the chipping of the existing PCC floor complete all as specified and directed by Engineer-in-Charge : (make SOMANY, KAJARIA, MARBITO)

All as per item No.99 above but each tile exceeding 0.18 Sqm but not exc. 0.36 Sqm complete all as specified and directed by Engineer-in-Charge

M&L for Vitrified Ceramic coloured light grade tiles 10mm thick (Squre/rectangular) ploshed, area of each tiles not exeeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed by Engineer-in-Charge

M/L rendering 15 mm thick cement mortar on Brick masonary surfaces or surfaces other than fair faces of brick work in cement mortar 1:4 as backing coat to glazed tile complete all as specified and directed by Engineer-in-Charge

M&L for digital glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm grade stone aggregate) as in Sub floors,Sub bases ,flooring etc complete all as specified and directed by Engineer-in-Charge

M&L cement concrete 75 mm thick type C-2 1:3:6 ( 40 mm graded agg ) as in plinth protection etc complete all as specified and directed by Engineer-in-Charge

M & L for Rubber moulded Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry in floors with gray cement and pigment with screed bed 15 mm CM 1:6 complete all as specified by Engr- in- Charge

M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 of 40 mm thickness, M-35 Grade over 25mm thick coarse sand complete all as specified and directed by Engineer-in-Charge

M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and coloured pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over 25mm thick coarse sand complete all as specified and directed by Engineer-in-Charge

M&L for Sand filling under floors or in foundation including watering and consolidating complete all as specified and directed by Engineer-in-Charge

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types nd including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, moulding on edge and polishing over and including 20mm thick screed bed in CM 1:4 complete all as directed by Engineer-in-Charge.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work complete all as specified and directed by Engineer-in-Charge

Demolition of brick work built in cement mortar. including coping but except ashlar facing dressed stone work to precast concrete article complete all as specified and directed by Engineer-in-Charge

M/L for Brick works with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

M&L providing precast cement concrete louvers and jallies 50 mm thick including precast RCC pillar type B-0 1:3:6 ( 12.5 mm graded agg and set in cement mortar 1:6 all as directed by Engr In- Charge .

M/L for rendering 15 mm thick on fair faces brick work or concrete surfaces in cement 1:4 and finished even and smooth complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge

Dimolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge

M&L for RCC 1:2;4 B0 (using of 12.5 mm Stone Aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and chajjas complete all as specified and directed by Engineer-in-Charge

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) all as specified and directed by Engr-in-Charge

M&L for 10 mm dia and over TMT bar cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire n.exc 0.9mm or with securing clips etc complete all as specified and directed by Engineer-in-Charge

M&L for 6 to 8 mm dia TMT bar cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends binding with MS wire n.exc 0.9mm or with securing clips etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster from brick or stone masonry or concrete surfaces and hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15 mm thick in CM 1:6 on Brick masonary or surface other than fair face of brick works etc or similar surfaces etc including with mixing of water proof compound liquid of Dr. fixit Qty 3% of the cement all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:3 on concrete surface in ceillings etc including with mixing of water proof compound liquid of Dr. fixit Qty 3% of the cement all as specified and directed by Engr-in-Charge.

M&L for Cutting grooves in brick/Stone wall 75mm wide and 65mm deep and shaping hirizontal face of groove with cement mortar 1;3 etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC 1:2:4 type B-1( using 20 mm graded stone aggregate) in filling the holes, cutting, etc necessary from work complete all as specified and directed by Engineer-in-Charge

M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc complete all as specified and directed by Engineer-in-Charge

M&L for preperation of new plastered surfaces and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company)

M&L for preperation of old distempered and painting surfaces etc and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company)

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 including macthing existing surfacescomplete all as specified and directed by Engineer-in-Charge

Taking down of existing tarfelt/water proofing treatment on roof top and clean the existing surface with water and providing screed bed 20 mm thick , in CM 1:4 mixed with intregal water proofing compound @ 3% by weight of cement, on fair faces of concrete surfaces and applying cold bituminious oil based primer IS No 3383@250Gms/Sqm and laying APP modified membrane with non woven polyster reinforcement mat (Centre core) not less than 3 mm thick & not less than 3.50 Kg/Sqm, the over the lap otching shall be 100 mm length side and 100 mm width side all as per manufacture's instruction complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and directed by Engineer-in-Charge

S&F interlocking aluminium powder coated snap grid consisting of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Tee 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F Water Resistance glass fibre reinforced Gypsum board of 12 mm thick for ceiling complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old previously decorated surfaces by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-Charge

All as per item No 138 above but on ceiling complete all as specified and directed by Engineer-in-Charge

All as per item No 138 above but one coat of oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge

All as per item No 138 above but two coat of oil bound distemper on walls complete all as specified and directed by Engineer-in-Charge

All as per item No 138 above but one coat cement base paint on walls complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment by washing, rubbing down and stopping of distempered and painting surfaces etc and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company)

M&L for Preperation of old previously decorated existing surface of wall then applying two coats of plastic emulsion paint in different patterns shade with rolling instrument including preparation of old decorative surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment from wall or similar surfaces applying 3 mm thick wall care putty on wall surfaces and well rubbing for making smooth and uniform surface with sand paper then applying two coats of interior emulsion paint in different patterns shade with rolling instrument including preparation of old decorative surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint over 10 cm in width or girth complete all as specified and directed by Engineer-in-Charge

All as per item No 146 above but on steel surfaces complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster from brick or stone masonry or concrete surfaces and hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L 15mm thick rendering on stone masonry / brick surface in cm 1:4 including mixing of water proofing compoud of Dr.fixit to finished even and fair including mixing of water proofing compoud of Dr.fixit complete all as specified and directed by Engineer-in-Charge Note: water proofing compound should be measered sepratly

Supply only integral water proofing compound( ISI marked) complete all as specified and directed by Engineer-in-Charge

M&L for preperation of new plastered surface and and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge. (Note - work shall be got executed through skilled representative of manufacture company)

M&L for applying 3mm thick wall care putty on wall, deep scraped surfaces or undulated surfaces in patches and making good even and smooth rubbing with sand paper etc complete all as specified and directed by Engineer-in-Charge

S&F sinks in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified in Engr-in-Charge.

S & F Stainless steel plate rack of size 900x600x450 mm Approved make as specified by Engr-in- Charge.

GARG CONSTRUCTION CO

NAVEEN KUMAR TYAGI

M/s Hemakshi Enterprises