Addition/alteration and special repairs to LWS Store house, Bldg No. P-14, at MO, Naval Base Karwar.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M&L for Glazed coloured ceramic tiles 300 x 200 x 7 mm thick on vertical surfaces such as skirting dados and risers to steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cement mortar (1:4) and taking down old tiles complete all as specified and directed.

M & L for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including screed bed or bedding layer 20 mm thick in cement mortar(1:4) for laying floor finishes and taking down old tiles complete all as specified and directed.

S & F in repair viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets 32mm dia bore CP wastes and other fittings all as specified and directed.

S & F in 32mm bore PVC waste pipe with fittings of approved make suitable for WHB, urinals etc complete all as specified and directed.

S & F in repair for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) fixed in repairs,complete all as specified and directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.

Supply and fixing 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/Sqcm including bends elbows, tees etc & fixing materials i.e HDPE/PVC gum laid in trenches complete all as specified and directed

S&F inr repair brass chromium plated Health faucet with spring pipe all as speified and directed. Make: Jaquar Cat No ALD-CHR-585 or equivalent as specified in list of makes

S&F Towel rail 600mm long brass chromium plated with brass chromium plated screws all as specified and directed (Make : Jaquar cat No CAN-111NM or Equivalent in makes as specified hereinafter.

S&F in repairs stop valve, cast copper alloy fancy type chromium plated with long shank & cup concealed type for iron pipe of 15mm bore of etc complete all as specified and directed.

S & F in repairs bib taps, long neck type, cast copper alloy fancy type, chromium plated, screwed for iron pipe15mm bore all as specified and directed.

S&F in repairs Pillar taps cast copper alloy, fancy type, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S&F in repairs MS Chromium Plated grating 125mm dia suitable for Nahani trap all as directed.

S & F in repair 15mm bore 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed by Engr-inCharge.

S&F in repairs 80mm dia brass chromium plated shower rose with swivel joints fancy type suitable for 15mm bore GI pipe all as specified and as directed. Make:- Jaquar Cat Part No: OHS 1985 or equivalent make as specified here in after.

S&F in repairs brass chromium plated shower arms15mm dia, 190 mm long all as specified and directed. Make : Jaguar Cat No SHA-483 or equivalent in makes Marc/Kohler

Taking down chowkats exc 1.5 Sqm but n. exc 4 Sqm with shutter (without taking off shutters from the frames) all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifiction & drawing.

S&F butt hinges medium weight cold rolled mild steel 100mm long.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 250mm long.

S&F aluminium alloy anodised handle, cast type 100mm long.

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m and n.exc 250m. complete all as specified and directed.

M & L for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, at the rate of 0.40 ltr/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighting not less than 4 Kg/Sqm of approved make including minimum 10 cm side lap and 15cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint at the rate of 0.1Kg/Sqm complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed

M &L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/Rain coat 601 of DR fixit /Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturers instructions complete all as specified and directed.

M & L repair of cracks by Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works.

M & L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified.

M& L for rendering 15 mm thick in cm (1:4) on fair faces of concrete surfaces and finished even and smooth without using extra cement and mixed with waterproofing compound @3% by weight of cement all as specified and directed

M & L for parparing newly plastered surfaces of wall and applying two coats of Acrylic washable distemper all as specified and directed

M&L two coats of exterior emulsion weather proof paint including preparation of surfaces on new plastered surfaces of walls all as specified and directed..

M&L preparing of old painted plastered surface of walls of any description including cornices and applying one coats of acrylic emulsion exterior grade, weather proof antifungal paint complete all as specified and directed.

M&L for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of surfaces all as specified and directed.

S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

SHREE KESHAV NARAYAN ENTERPRISES

VITTAL P NAYAK

SIRI SALES AND SERVICES

M/S KAMALKANTH NAIK

LEKSHMI ENGINEERS

S M Shetty

KVL CONSTRUCTION

RAJESWARI CONSTRUCTIONS

K.G.SHANKER

Bidder Name

LEKSHMI ENGINEERS

K.G.SHANKER

KVL CONSTRUCTION

M/S KAMALKANTH NAIK

sohan construction

S M Shetty

SIRI SALES AND SERVICES

SHREE KESHAV NARAYAN ENTERPRISES

RAJESWARI CONSTRUCTIONS

VITTAL P NAYAK