Sanitary fittings of bathroom for office for in charge model orchard cum nursery tanning center at terchay

Amount

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colours, shades, except White, Ivory, Fume Red.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. With white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C. I brackets, 15mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wall wherever required:- White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm Thick hard board backing.Rectangular shape 453x357 mm

Providing and fixing toilet paper holder. C.P. brass.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.0 meter spacing including cutting chases and making good the wall incl. PPR union, socket, elbow, tee etc complete job. 25mm dia

32mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.75mm dia

110 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Constructing soak pit 1.20x1.20x1.20m filled with stone including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.

Providing and fixing 8 mm dia C.P /S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C of quality and make as approved by Engineer – in – charge.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20 mm nominal bore.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screw. 600 mm long towel rail with length of 645 m, 78 mm wide and effective height of 88 mm.

Providing and fixing Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460mm bowl depth 200mm

Providing and fixing M.S grating of approved quality. Circular type. 100 mm nominal dia.

Providing and fixing water heater (gyeser) of approved brand and quality. 20 Litre capacity.

Providing and fixing PVC floor Door Tee junction.75mm dia

110mm dia

Providing and fixing PVC Plain bend with door. 75mm dia

110mm dia

Providing and fixing CP brass single lever wall mixer two in one of approved quality .

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floor, roof, landing etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Providing and fixing PVC Floor P trap.

M/S SHABIR SHAH GOVT CONTRACTOR

M/S JIGMAT LOTUS