PROVN OF BADMINTON COURT, PROVN OF STORE FOR HQ PL NEAR PLATOON GARAGE, SPL REPAIR INCL REPLACEMENT OF BER SUBMERSIBLE, CHLORINE DOSING SYSTEM AND CONNECTED WORKS, REPAIR/MAINT OF EXTERNAL ELECTRIC SUPPLY DISTRIBUTION NETWORK INCL REPLACEMENT OF DAMA

Amount

Sch 'A' Part-I (B/R & EM) Surface excavation not exceeding 30cm deep and averaging 18cm deep and getting out in soft/loose soil, complete all as specified and directed.

Surface dressing not exceeding 15cm deep in soft/loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth and n.exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

Excavating in post holes (or similar holes) each n. exc. 0.5 cum getting out in soft/loose soil, returning, filling in ramming earth of broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and directed

Returning filling in of excavated material (soils) incl spreading, leveling, watering, and well, ramming in layer nexc 25cm in layers, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregatet) as in sub-base to floors, pavings etc., complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork, complete all as speicified and directed

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) finished even and fair without using extra cement as in floors, paving etc, complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6) type C- 2, (using 40mm graded crushed stone aggregate) as insub-base to floors, pavings etc., complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and similar work, complete all as specified and directed.

S&F of hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedng in concreted and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 209 Gde E-165, complete all as specified and directed

S&F of ITF approved polypropylene interlocking tiles for outdoor Tenis court/Badminton court/Volleyball court with following specification:- (a) Thickness of tiles not less than 15.5mm. (b) Dimension not less than 304.8mm x 304.8mm, square shape (c) Weight not less than 320-340gm/per tile Note :- Contractor shoud produced manufacturer waranty certificate 05 years alongwith original purchage voucher.

M&L for game line marking of badminton court of size 25' x 50' (1250 Sqft) with standard specification/thickness and as per manufacturers instructions, complete all as specified and directed

M & L for PCC (1:4:8) type D-2 (nominal mix) (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and similar work, complete all as specified and directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

Applying evenly a coat of blown type bitumen @ 1.50Kg/Sqm and blinding with clean dry sand @ 0.05cum/sqm, complete all as specified and directed

S&F of polythene film 150 micron thick, laid over and including a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm, complete all as specified and directed

M&L for machine cut kota stone slab flooring and shelves 20-25mm thick, laid over and including 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs landings, lintel beam and similar work ,vertical or to batter for rough finished flat surfaces of concrete, complete all as specified and directed.

Use and waste of formwork to chulla hoods, chaajja, through and similar items including edges and facia for rough finished flat surfaces of concrete, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over (not less than Fe 500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for Mild steel TMT bars 5mm dia and over, upto and including 10mm dia (not less than Fe 500D) as in striups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, lintels and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L for steel windows with side hung shutters with mosquito proffing by provision including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F of steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F of framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 3mm thick sheet glass,ordinary quality and glazing with oil putty or fixed with beads in square n. exc 0.5 Sqm in each pane, complete all as specified and directed.

M&L steel work in tubular trusses, purlins, post including special shaped waher etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST 240 including painted with one shop coat of red oxide primer (including preparation of surfaces), complete all as speicified and directed.

M&L plates (plain or chequared) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment steel of Fe 410W (Gde E250), quailty B, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description n. exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.

M&L for rendering 15mm thick, in cement mortar (1:6) on brick walling or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

M&L for preparation of newly plastered surfaces of wall, any description and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed

M & L for disconnecting all electric and water supply connections and other related items and lifting the unserviceable VT/Submersible pump and motor of capacity 12.5 HP to 20 HP, 3 phase, 415 Volt, 10 staging by mechanical / manual method and dismantling the coloumn pipe line, shafts stage and keeping the same in safe custody for re-use inlcuding the unserviceable pump set and motor from pump house to E/M Store yard, complete all as specified and directed.

S & F mild steel coloumn pipe, 100mm bore, heavy duty, having wall thickness, 5.4mm (3.2 m/1.524m long) both end threaded with one socket conforming to IS-1239 (Part I), 1979 including painting with two coats of black bituminous paint over a coat of red oxide zine chrome primer internally and externally (suitable for drinking purpose) including taking down old unserviceable pipe, complete all as specified and direccted.

Re-development of bore well by means of air compressor of capacity (not less than 600 cu.feet / minute) followed by high capacity pump to its optimum yield till clear water of potable quality free from sand and slit is obtained including draw down performance and yield test of tube well, complete all as specified and directed. Note :- (i) Compressor shall be not less than 75 BHP or above capacity pumping set equipment for testing yield shall be used. (ii) Unit shall deemed to be quoted rate under this items shall to be inclusive cost of necessary tools and equipments with fuel as required to the site of work and removing the same after completion work.

Supply, lowering (in bore well) testing, commissioning of submersible pumping set, water lubricated and cooled complete with stream line not return valve, directly coupled with pump set and motor suitable for operation on 415 (+) 7.5% voltage 3 phases, 50 C/S AC Supply. The pump set shall be capable to deliver 450 LPM (Liters per minute) of water at a head of 195 metre. The electric motor shall be thermetically sealed, water lubricated vertical type and shall be directly coupled to the pump and including steel pump guard jacket with 10 mm dia stainless steel wire rope 2.50 metres long pieces with 8 Nos rope clamp for mechanical locking of column pipe. Pump and electric motor shall be of same make and HP of motor should be as recommended by the manufacturer and not less 20 WHP, complete all as specified and directed.

Supply, fixing, jointing and testing submersible flat cable copper conductor flexible stranded, PVC insulated and PVC sheathed 1100 volt grade, 3 core 6 Sqmm nominal area ISI marked and fixed to column pipe using stainless steel bolts, nuts and two numbers washers (2 Nos clamps for every column pipe of 3 meter length), complete all as specified and directed.

Chemical and bacteriological testing of water sample to ensure potability of water including collection of samples, carrying to lab and collection of test results, complete all as specified and directed.

Yield testing of tube well continuous up to 16 hrs in IS : 2500 (Part-II) - 1970 to determine the safe pumping yield of tube well, complete all as specified and directed.

Supply, installing, commissioning & testing, liquid chlorineation chemical dosing pump of capacity 02USGPD to 40USGPD at 100 pisg, high pressure single head heat motored adjustable dosing pump with all accessories including lead, tubing, connecting units, injection check valve, clay weight and ferrules complete with all accessories as per manufacturer's instructions including taking down old unserviceable pump, complete all as specified and directed.

M&L for sub class ‘B’ old size bricks, burnt clay bricks, laid flat, dry in trenches for cable protection, complete all as specified and directed.

Supply, filling in trenches, spreading, leveling sand cushioning 8cm below cable and 15cm above the cable punned down to 18cm for under ground cable, complete all as specified and directed. (Note : Punned thickness shall be measured for payment)

S&F GI tubing 50mm bore (light grade) with all fittings for protection of cables, laid in trenches including making good to the distrurbed surface including taking down/up old unserviceable GI pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)

S&F GI tubing 80mm bore (light grade) with all fittings for protection of cables, laid in trenches including making good to the distrurbed surface including taking down/up old unserviceable GI pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including taking down old unserviceable UG cable of any description, complete all as specified and directed.

All as per item No 55.00 here-in before but 50 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 55.00 here-in before but 70 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 55.00 here-in before but 95 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 55.00 here-in before but 120 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 55.00 here-in before but 240 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 55.00 here-in before but 300 Sqmm 3.5 core, complete all as specified and directed.

Horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, without damaging the existing road, getting out and disposal of materials to a distance not exceeding 50m from the site of work, complete all as specified and directed.

M & L for power cable route marker pre-cast RCC of size 1000mm x 300mm x 50mm with top curved portion, 8mm dia round bar reinforcement, emboshing of letter (MES-LT CABLE) both faces of pre-cast during casting of RCC pre-cast, applying two coats of external emulsion paint with primer approved colour and painting of emboshed surface with black colour including fixing of route marker with proper PCC (1:3:6) as in foundatiuon, complete all specified and as directed.

Horzontal directional drilling (HDD) boring of holes under road, pavement, hard standing, Runway/ PTT by trenchless technology using ultra sounding technique and necessary machine including privison of HDPE pipe of sie 100mm dia suitable for 0.4 mpa working pressure, complete all as specified and directed.

S&F factory fabricated busbar chamber outdoor type made out of 3.15mm thick CRCA sheet with powder coating of size not less than 1.00 x 0.45 x 0.90 for set of 04 copper busbar 400 Amps rating , supported with suitable size heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chamber shall be fixed 60cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 and fixing arrangement with angle iron 50 x 50 x 6mm, complete all as specified and directed.

S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material, heat shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable of size 70 to 120 sqmm, complete all as specified and directed.

M&L for earthing of equipment complete with copper earth plate electrode 60 x 60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to existing earth lead strip by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work PCC (1:2:6) type C-1 with suitable size of CI cover plate with angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (light grade) wire mesh, copper lugs, complete in all respect,including copper earth strip 20 x 3.15mm, 40mm bore (medium grade) galvanized iron pipe up to earthing test point as directed, incl disposal of soil to a distance not exc 50 mtr and necessary testing on completion including taking down/dismantling of old unserviceable earthing of any description, complete all as specified and directed. Note : (i) Earth result after installation completely should be less than 5 Ohm. (ii) Copper earth strip upto 7.5m from earth electrode with suitable protection pipe shall deemed to be included in the unit quted rate.

Taking down and servicing of split (outdoor and indoor unit) type AC of 1.5/2 TR capacity of any type/size/make/model cleaning and washing of inddor and outdoor unit assembly by chemical and high pressure jet pump, checking, retightening of all electrical connections, replacement of nut, bolts, screws, washers, internal wiring, gas charging valve,reassembling, realignment/refixing indoor and outdoor unit properly,refixing properly after repair, complete all as specified and directed. Note : Spare parts & gas charging shall be measured & paid seperately.

Taking down and servicing of window type AC of 1.5 to 2 TR capacity, any type/size/make/model cleaning and washing of condenser assembly with chemical and high pressure jet pump, checking and retightening of all electrical connections, replacement of nut, bolts, screws, washers, internal wiring and refixing properly after servicing, complete all as specified and directed. Note : Spare parts & gas charging shall be measured & paid seperately.

Taking down and servicing of water cooler of capacity 40 to 80 Ltr of any type/make/model and cleaning, washing condenser assembly with high pressure jet pump and cleaning, rubbing and washing of storage water tank, draining of dirty water silt, checking, retightening, all electrical connections, replacement of nut, bolts, screws, washers, drainpipe, internal wiring and reassembling properly after repair, complete all as specified and directed. Note : Spare parts & gas charging shall be measured & paid seperately.

Taking down and servicing of refrigerators of 165 Ltr to 320 Ltr capacity ,any type/size/make /model including replacement of unserviceable parts and cleaning, washing, condenser assembly, retighening all electrical connections, replacement of nut, bolts, screw, washers, internal wiring, fixing properly bracket housing of capacitors and reassembling properly after repair, complete all as specified and directed. Note :Spare parts & gas charging shall be measured & paid seperately.

M&L for testing leakage of gas and replacement of damaged portion of copper pipe of any dia upto 30cm length, brazing by oxyaccetelene gas welding and good quality copper brazing rods or soldering damaged portion, flaring copper pipe, replacement of flare nut and pouring the nitrogen gas flushing to check the leakage in copper pipe lines, recharging suitable gas fully after complete removal of nitrogen gas on satisfactorily completion of leak test, reassembling and testing cooling of whole refrigerator of any capacity/type and make, complete all as specified and directed.

All as per item No 72.00 her-in-before but for window type AC of any capacity/make/type/model, with R-22 gas, complete all as specified and directed.

All as per item No 72.00 her-in-before but for water cooler of any capacity/make/type/model, with R-134 gas, complete all as specified and directed.

All as per item No 72.00 her-in-before but for split type AC of any capacity/make/type/model, with R-22/134/410A gas, complete all as specified and directed.

S&F power unit with 20 Amps starter including 4 module plate, 20A plug and socket, PVC box for mounting of power unit suitable for 20 Amps power unit and connection of electric supply and testing, complete all as specified and directed.

Dismantling and taking down from existing position window type AC 1.5/2 ton capacity and refixing the same in new position including necessary cutting opening, fixing, connecting, testing and making good disturbed surface of old position and new position etc, complete all as specified and directed.

Dismantling and taking down from existing position split type AC of capacity 1.5/2 ton and refixing the same in new position including necessary cutting opening, fixing, connecting, testing and making good disturbed surface of old position and new position etc, complete all as specified and directed. Note : Necessary gas charging, mounting and drain pipe and copper tube will be paid and measured seperately.

Dismantaling only any type of air conditioner capacity upto 2 TR incl repairing in workshop outside the station premises and repair back to the site, complete all as specified and directed.

Taking down and dismantling the unserviceable blower motor from 1.5/2 TR window/split AC of any type including opening all outer case and rewinding,heat varnishing the blower motor with super enamel copper wire of suitable gauge by taking out burnt winding and cleaning the iron core, complete all as specified and directed.

All as per item No 80.00 here-in-before but blower motor of water cooler of capacity 40 to 80 Ltr, complete all as specified and directed.

S & F in repair potential relay box suitable for refrigerator of any make/model/capacity, complete all as specified and directed.

S & F in repair auto defrost thermostate switch suitable for refrigerator, complete all as specified and directed. Make:Ranutrol / Indfos / Denfos

S & F in repair pigmay bulb (thick/thin thread) 230 Volt suitable for refrigerator, complete all as specified and directed.

S & F in repair harmetic sealed type compressor suitable for existing 180/230/310 Ltr refrigerator , complete all as specified and directed.

S & F in repair freezer fan motor single phase 230 Volt, 50 Hz suitable for existing refrigerator of capacity 280 to 310 Ltr, complete all as specified and directed.

S&F in replacement of door gasket suitable for deepfreezer 300/320 ltr & 310/286/165 litre capacity refrigerator, complete all as specified and directed.

S&F in replacement of freezer including necessary capillary suitable for existing 165 litr capacity deep freezer, complete all as specified and directed.

S & F in repair cooling coil assy suitable180 to 310 Ltr capacity refrigerator, complete all as specified and directed.

S & F for fan motor single phase 230 Volt, 50 Hz suitable for window type AC, complete all as specified and directed.

S & F in repair harmetic sealed type compressor suitable for existing window type AC of capacity 1.5 TR, complete all as specified and directed.

S & F in repair rotary compressor of 1.5/2 ton capacity suitable for split type AC of existing make/model 1.5 TR capacity, complete all as specified and directed.

S & F in repair outdoor fan motor single phase 230 Volt, 50 Hz suitable for existing split type AC of capacity 1.5/2.0 TR, complete all as specified and directed.

S&F in replacement of condenser coil set suitable for window type AC of capacity 1.5 ton as per existing size and make, complete all as specified and directed.

S&F of swing motor for split AC fitted in internal unit of capacity 3 to 5 watt, 5 to 8 RPM suitable for 1.5/2 ton split type AC with wiring kit and thimble, complete all as specified and directed.

S&F in replacement of air filter for split air conditioner as per sample suitable for upto 2 ton capacity split type AC, complete all as specified and directed.

S&F in replacement of front grill of window type air conditioners upto 2 ton capacity as per sample/model of the air conditioner, complete all as specified and directed.

S & F in repair PCB of non invertor AC with complete accessories of existing make/capacity, complete all as specified and directed.

S & F in repair multi terminal capacitor (50 + 6/50 + 4mfd) suitable for existing split AC (stating, running and fan combined), complete all as specified and directed.

S&F in repair PVC medium grade 15mm dia drain pipe for split AC as per existing, complete all as specified and directed.

S&F in repair PCB for outdoor unit of invertor AC model and make as per existing, complete all as specified and directed.

S&F in repair PCB for indoor unit of invertor AC model and make as per existing, complete all as specified and directed.

Supply and filling of refrigerant gas R-22 in factory sealed cylinder, complete as specified and directed.

Supply and filling of refrigerant gas R-134a factory sealed cylinder, complete as specified and directed.

Supply and filling of refrigerant gas R-410A factory sealed cylinder, complete as specified and directed.

S&F in repair blower motor Indoor unit single phase 230 V suitable for window type AC 1.5/2 ton, complete all as specified and directed.

S & F in repair copper tube 1/4", complete all as specified and directed.

S & F in repair copper tube 1/2", complete all as specified and directed.

S & F in repair insulation tube 1/4", complete all as specified and directed.

S & F in repair insulation tube 1/2", complete all as specified and directed.

S & F in repair copper tube 5/8", complete all as specified and directed.

S & F in repair insulation tube 5/8", complete all as specified and directed.

S & F in repair remote control suitable for existing 1.5/2 ton split/window type AC, complete all as specified and directed.

S & F in repair overload protector relay suitable for 40 to 80 Ltr water coolers of any make/model, complete all as specified and directed.

S & F in repair potential relay box suitable for 40 to 80 Ltr water cooler, complete all as specified and directed.

S & F in repair thermostate switch suitable for 40 to 80 Ltr water cooler, complete all as specified and directed.

S & F in repair chromium plated brass push cock 1/2" (inner/outer thread) dia suitable for water cooler of any capacity, complete all as specified and directed.

Welding and patch repair of bottom and side panel of water coolers including replacement of bottom MS sheet of 16 gauge for mounting compressors and blower motors, complete all as specified and directed.

Spray painting to water cooler (capacity 150 Litre per hour) with synthetic enamel paint (1st grade quality) including preparing the existing painted surface, complete all as specified and directed.

S & F in repair 15mm dia PVC cold water pipe with both ends brass/chromium coated socket suitable for water cooler, complete all as specified and directed.

S & F in repair harmetic sealed compressor suitable for existing water cooler of cooling capacity 40/80 Ltr, complete all as specified and directed.

S & F in repair condenser unit assembly suitable for existing split AC 1.5 /2 ton capacity, complete all as specified and directed.

S & F in repair split AC outdoor mounting stand, as per existing, complete as specified and directed.

S & F in repair starting capacitor 50-100 Mfd for existing AC unit, complete as specified and directed.

S & F in repair running capacitor 30-50 Mfd for existing AC unit, complete as specified and directed.

S & F in repair flexible PVC insulated 3 core 4 Sqmm FR PVC multistranded cables with copper conductor for voltage grade upto 1100 V, complete as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20mm bore and watering pipe GI medium grade of 20mm bore and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No-3 of SSR part-I (2009) connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, including demolition of old unserviceable earthing of any description, complete all as specified and directed. Notes : Proper earthing pit should be provided with pit cover.

S & F in repair GI strip 32mm x 6mm buried in ground, complete all as specified and directed.

M&L for earthing complete with GI earth plate elecrode of size 600mm × 600mm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI earth strip 32 mm x 6mm by means of bolts, nuts, check nuts and washers of brass or HS steel all as shown in electrical plate No. 3 connected to earthing test point and and necessary excavation and earth work pre-cast RCC(1:2:4) type B-1 pit cover 50mm thick, reinforced with 8mm dia TMT bars @100 mm /C/C both ways with one handle for lifting made out of 10mm dia TMT bar embedded in precast cover slab and PCC(1:2:4) type B-1 concrete pit and angle iron frame and opening arrangement ) incl providing charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 20mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect, protected by 40mm bore (light grade) galvanized iron pipe up to earthing test point as directed, incl disposal of spoil to a distance not exc 50 mtr and necessary testing on completion, complete all as specified and directed. Note: (i) Proper earthing pit should be provided with pit cover. (ii) GI strip beyond 7.5 RM shall be measured and paid separately.

Supply and install split type Air conditioning units 2.0 TR indoor and outdoor complete with cordless remote control unit and with 5 star rated/BLDC type compressor unit with non CFC refrigerant, auto swing, LED display, noise level not more than 42 db function complete with all piping arrangment, etc, complete all as specified and directed. Note : (i) Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level / max up to 6.0 Mtrs fixed on wall /floor/ ceiling. (ii) The quoted rate includes necessary fixing arragement for indoor and outdoor units and copper tubing upto 6.00 mtr length, brazing, welding including insulation, complete charging of refrigerator gas upto required level and filling the cavities on wall and setting of grill alignment and including testing & commissioning.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300V with output voltage stabilized at 230 V with accuracy of ± 2.5% can operate upto 12 Amp and above , capacity 5 KVA, complete all as specified and directed.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, 4.0 Sqmm (nominal area) drawn in and including heavy duty PVC casing-caping of suitable size including 4.0 Sqmm (nominal area) 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including taking down old unserviceable sub-main wiring, complete all as specified and directed. Note:- Three runs of cable and one run of PVC casing-caping shall be measured as one length of sub main.

S&F in repair MCB SP, 6 to 32 Amps, 240V, 10 KA, 'C' curve, including connection and testing, completes all as specified and directed.

S&F power unit up to 25 Amps including sockets 25 Amps, 02 module box for mounting of power unit, complete as specified and directed.

S&F modular type sockets 16 Amps, 02 module box for mounting socket, complete as specified and directed.

S & F modular metal flush box 2 module concealed (socket and power unit), complete as specified and directed.

Supply, installation, commissioning of glass top deep freezer capacity 320 litres with eco friendly CFC free refrigant capacity single phase 240 volt, 50 Hz 5 star rated with power plug of suitable rating including power cable, complete all as specified and directed.

Supply and install refrigerator, electric driven (single phase), capacity 310 litres capacity, 3 star, double door with eco friendly CFC free refrigerant, frost free refrigerator, auto defrost function to prevent ice-build up with power plug of suitable rating including power cable with base stand, complete all as specified and directed.

Supply and install refrigerator, electric driven (single phase), capacity 320 litres capacity,3 star, triple Door eco friendly CFC free refrigerant, frost free refrigerator, auto defrost function to prevent ice-build up with power plug of suitable rating including power cable with base stand complete all as specified and directed.

Supply, installation, commissioning of glass top deep freezer capacity 400 litres capacity with eco friendly CFC free refrigerant single phase 240 volt, 50 Hz 5 star rated with power plug of suitable rating including power cable, complete all as specified and directed. Note for Sl item Nos. 130.00, 137.00 to 140.00: (i) Contractor has to submit the type/star rating/color of brand for approval from GE. Cost escallation with respect to minor variation of cooling capacity over and above described in BOQ as per the market availability/as per brand submitted by the contractor shall be deemed to be included in unit quoted rate. Contractor has to confirm the market availability of Nominal cooling capacity/type of Compressor/Eco friendly CFC refrigerant. (ii) Nominal cooling capacity of refrigerator/deep freezer is varies as per brand/star rating/local market availability. Quated rate for refrigearor is deemed to be included the variation of colling capacity maximum up to 10 % mentioned in BOQ.

S&F in repair socket outlet modular, flush type, 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, complete all as specified and directed.

S&F switch piano flush type, single pole, one ways, 15/16 Amps, complete all as specified and directed.

S&F ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.

S&F air circulator fan 230 volts single phase oscillating 450mm sweep, speed 1440 RPM, air delivery 125 CMM, power 100W with double ball bearing suitable for wall mounting with fixing arrangements and connecting up to ceiling rose with flexible wire, completes all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded drawn in and including concealed PVC conduit not less than 20mm dia, including fittings, including cutting chases on wall for concealed conduit and sinking of CI/pressed steel terminal boxes, 60mm deep, 1.2mm thick for mounting switches, sockets etc with and including 3mm thick plastic laminated sheet cover fixed with brass screws and cup washers duly grouted and pointed with red oxide primer inlcuding PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for one light point/one fan point controlled by one, one way switches inlcuding making good distrurbed surfaces of wall in CM (1:3) and finished the surfaces as per existing, complete all as specified and directed.

S & F switch socket combination 5 pin, 5/6 Amps, flush type, complete all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 2.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded drawn in and including concealed PVC conduit not less than 20mm dia, including fittings, including cutting chases on wall for concealed conduit and sinking of CI/pressed steel terminal boxes, 60mm deep, 1.2mm thick for mounting switches, sockets etc with and including 3mm thick plastic laminated sheet cover fixed with brass screws and cup washers duly grouted and pointed with red oxide primer inlcuding PVC insulated FRLSH unsheathed stranded copper conductor of size 2.5 sqmm as earth wire connected to common earth dully for one light point/one fan point controlled by one, one way switches inlcuding making good distrurbed surfaces of wall in CM (1:3) and finished the surfaces as per existing, complete all as specified and directed.

Sch 'A' Part-II (REPAR TO FURNITURE) REPAIR TO ALMIRAH LARGE STEEL (FD- 1031) Taking down old unserviceable locking devise of almirah large steel and supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws, all as per drawing, complete all as specified and directed.

M & L for repairing locking device of almirah steel large including lock bar, complete all as specified and directed.

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed.

Taking down old unserviceable handle of almirah large steel and supply and fixing new chromium plated handle, fixed with screws, all as per drawing, complete all as specified and directed.

Taking down old unserviceable legs of almirah large steel and supply and fixing new legs made out of 1mm thick mild steel black sheet, all as per drawing, complete all as specified and directed.

Taking down old unserviceable shelves of almirah large steel and supply and fixing new shelves made out of 1 mm thick mild steel black sheet made to shape, all as per drawing, complete all as specified and directed.

M & L for scrapping out old painted (external and internal) surface of almirah large steel and applying spray painting two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer by spray painting including preparation of surfaces and filling cavities with putty, complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL (FD- 1032) Taking down old unserviceable locking device from almirah medium steel and supply and fixing new lock of suitable size provided with duplicate keys, complete all as specified and directed.

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed.

Taking down old unserviceable handle and supply and fixing new chromium plated brass handle, of size 125mm, fixed with screws, all as per drawing, complete all as specified and directed.

Taking down old unserviceable legs of almirah medium steel and supply and fixing (by welding) new legs made out of 1mm thick mild steel black sheet, all as per drawing, complete all as specified and directed.

Taking down old unserviceable shelves of almirah medium steel and supply and fixing new shelves made out of 1mm thick mild steel black sheet made to shape, all as per drawing, complete all as specified and directed.

M & L for running welding in repair to broken/damaged sides (left/right), back and top of almirah steel large, complete all as specified and directed. (Note : Thickness of material to be welded n. exc. 2mm and length of each welding exc. 10mm but n. exc. 20mm).

M & L for scrapping out old painted (external and internal) surface of almirah large steel and applying spray painting two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer by spray painting including preparation of surfaces and filling cavities with putty, complete all as specified and directed.

REPAIR TO CHAIR EASY (FD-229) M & L for replacement of damaged front legs of chair easy with well seasoned 1st class teakwood, all as per drawing, including taking out old legs, complete all as specified and directed.

All as per item No. 150.00 here-in-before but rear legs, complete all as specified and directed.

All as per item No. 150.00 here-in-before but arm rest of chair easy, complete all as specified and directed.

All as per item No. 150.00 here-in-before but fillet for canning, complete all as specified and directed.

All as per item No. 150.00 here-in-before but rail of seat and back, complete all as specified and directed.

M&L for preparation of surfaces by removing of old existing out polish from chair easy by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of french polish of approved quality/PFU with high glossy finish on exposed surfaces to view, complete all as specified and directed.

REPAIR TO CHAIR DINING (FD-279) M & L for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing, including taking out old leg, complete all as specified and directed.

All as per item No. 151.00 here-in-before but rear leg, complete all as specified and directed.

All as per item No. 151.00 here-in-before but back rest, complete all as specified and directed.

All as per item No. 151.00 here-in-before but stiffener, complete all as specified and directed.

All as per item No. 151.00 here-in-before but side rail, complete all as specified and directed.

All as per item No. 151.00 here-in-before but front rail, complete all as specified and directed.

All as per item No. 151.00 here-in-before but back rail, complete all as specified and directed.

All as per item No. 151.00 here-in-before but fillet, complete all as specified and directed.

M&L for preparation of surfaces by removing of old existing faded out polish from chair dining by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of french polish of approved quality/PFU with high gloss finish on exposed surfaces to view, complete all as specified and directed.

REPAIR TO PEG TABLE ( FD- 277 & 384) M & L for replacement of top of peg table with 18/19mm thick pre-laminated particle board one side teak face (exterior grade) with 4mm thick teak wood edging all round, all as per drawing, including taking out old table top, complete all as specified and directed.

M & L for replacement of leg of peg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing, including taking out old leg, complete all as specified and directed.

M & L for replacement of damaged side/front rail of peg table with well seasoned 1st class teakwood, all as per drawing, including taking out old front rail, complete all as specified and directed.

Taking out broken stiffener/bottom rail of peg table and supply and fixing new stiffener/bottom rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed.

M&L for preparation of surfaces by removing of old existing fade out polish from peg table by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of french polish of approved quality/PFU with high gloss finish on exposed surfaces to view, complete all as specified and directed.

REPAIR TO TABLE DINING FOR 4/6 PERSONS (FD- 273 & FD/MAP-II/03) M & L for replacement of top of table dining 4 persons made out of 18mm thick exterior grade prelaminated MDF board including taking out old unseviceable top, complete all as specified and directed.

M & L for replacement of top of table dining 6 persons with 18/19mm thick pre-laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all-round, all as per drawing, including taking out old top, complete all as specified and directed.

M & L for replacement of damaged long rail of table dining 4 persons with well seasoned 1st class teakwood, all as per drawing, including taking out old long rail, complete all as specified and directed.

M & L for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class teakwood, all as per drawing, including taking out old long rail, complete all as specified and directed.

M & L for replacement of damaged short rail of table dining 4/6 persons with well seasoned 1st class teakwood, all as per drawing, including taking out old short rail, complete all as specified and directed.

M&L for preparation of surfaces by removing of old existing faded out polish from table dining 4 persons by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of french polish of approved quality/PFU with high gloss finish on exposed surfaces to view, complete all as specified and directed.

All as per item No. 153.50 here-in-before but for table dining 6 persons, complete all as specified and directed.

REPAIR TO SOFA SET 4/5 SEATER (FD-281/373) Supply of foam cushion of size 530mm X 500mm X 100mm thick (32 grade high density cool foam) covered with tapesty cloth (not less than Rs.225/- per mtr cost of cloth) including stitching, complete all as specified and directed.

M & L for replacement of damaged front legs of Sofa set (4/5 Seater) with well seasoned 1st class teak wood, all as per drawing, including taking out old front legs, complete all as specified and directed.

M & L for replacement of damaged rear legs of Sofa set (4/5 Seater) with well seasoned 1st class teak wood, all as per drawing, including taking out old rear legs, complete all as specified and directed.

M & L for replacement of damaged arm-rest of Sofa set (4/5 Seater) with well seasoned 1st class teak wood, all as per drawing, including taking out old arm-rest, complete all as specified and directed.

M & L for replacement of damaged front and back rail of seat and back of sofa set (4/5 Seater) with well seasoned 1st class teakwood, all as per drawing including taking out old front and back rail, complete all as specified and directed.

M & L for replacement of damaged side rail of seat and back of sofa set (4/5 Seater) with well seasoned 1st class teakwood, all as per drawing, including taking out old side rail, complete all as specified and directed.

M & L for replacement new stiffener of sofa set (4/5 Seater) seat and back of required size made out of well seasoned 1st class teak wood, all as per drawing, including taking out old stiffener, complete all as specified and directed.

M&L for preparation of surfaces by removing of old existing faded out polish from sofa set 5 person by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste of putty and applying two coats of french polish of approved quality/PFU with high gloss finish on exposed surfaces to view, complete all as specified and directed.

All as per item No. 154.70 here-in-before but for sofa set 4 persons, complete all as specified and directed.

RECANNING OF CHAIR DINING/CHAIR EASY (FD/DB) Taking down old worn out plastic cane from chair dining/chair writing/chair easy/Stool dressing and reweaving the same with new approved quality plastic cane 3mm wide half round, white, with bordering of 4mm wide half round white plastic cane, canning shall be done in godrej pattern, complete all as specified and directed.

Note: An amount of Rs.39,430.00 on account of Credit Schedule for schedule 'A' Part - III shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S BISHAL ENTERPRISES (BID ID -3115724)

M/S BIJAY KUMAR SHIVA (BID ID -3116079)

BHARAT ELECTRIC (BID ID -3115793)

SHRI D P AGARWAL (BID ID -3115987)

M/S RATHIN ENTERPRISES (BID ID -3116153)