8388 REPAIR/MAINTENANCE OF INTERLOCKING TILES , CHEQUERED TILES, HARDSTANDING AND CERTAIN MISC B/R WORKS AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Demolition of reinforced cement concrete as in beams , coloumns and footings and slab etc complete all as specified and directed.

Material and labour for RCC 1:2:4 (Nominal Mix) type B1 (using 20mm graded stone aggregate) as in precast cover slabs,shelves and similar articles with plain faces complete all as specified and directed.

Supply and fixing TMT bars 10m dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15cm thick below or above GL unreinforced complete all as specified and directed.

Material and labour plain cement concrete type D2, 1:4:8, 100mm thick in sub base of floor finished even and rough to receive top layer complete all as specified and directed.

Material and labour plain cement concrete type B1, 1 : 2 : 4, 50mm thick (using 20mm graded aggregate) finished even and fair without using extra cement complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block 60mm thick made of M-35 grade cement in any shape and grey cement and pigment shade laid over and including 50mm thick sand cushioning complete all as specified and directed

Material and labour for Chequered cement concrete tile 30cm x 30cm x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 : 6, complete all as specified and directed..

Material and labour for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 50 mm thick as in plinth protection finished even without using extra cement complete all as specified and directed.

Supply and fix glass dividing strips 38 x 3mm thick complete all as specified and directed.

Material and labour for forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Material and labour for 18mm to 20mm thick granite (of any type) work (table rubbed and polished) in steps ; jambs; pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including provision of screed bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of screed bedding layer 15 mm thick in CM 1 : 6 complete all as specified and directed.

Dismantling Asbestos Cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr in Charge.

Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr in Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

Material and labour for rolled steel in Roof trusses/ I sections (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement including all quoins, arches, pillars, etc complete all as specified and directed.

Material and labour Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Material and labour PCC 1 : 2 : 4 type B-1 (using 20mm graded stone aggregate) cast in situ as in coping including necessary form work complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for Loose filling with aggregates of gauge upto 40mm broken stones or boulders spread and levelled in layers n.exc 15cm thick complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or Aluminium partitions/ insulation boards / slabs / blankets any thickness including cover fillets complete all as specified.

Material and labour Powder coated Aluminium frame for doors, windows, ventilators, wall cladding with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing in repair 4mm thick Aluminium Composite Panel (ACP) of two aluminium skins each of having 0.25mm thick exterior grade of any colour and design as approved by GE for wall elevation to be fixed in aluminium frame work at any height complete all as specified and directed. (Make : Alstrong/VIVA/Eurobond/Virgo or equivalent) as approved by GE.

Ms Karthik Enterprice (BID ID -3106577)

sri manikandan enterprises (BID ID -3122438)

MSR ENTERPRISES (BID ID -3122260)

CHANDRASEKRAN ENTERPRISES (BID ID -3122392)

THIRUMURUGAN ENTERPRISES (BID ID -3122346)