Provn of 02 x bathroom with toilet adjacent to Bldg. No T-03 and T-08 for WEU at old air field Srinagar

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out as in any type of soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, sewage pipe line, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out from any type of soil, including cutting of roots of trees, weeds, bushes, or any type of obstacles like chain link fencing, etc whille digging out for man holes pits , or digging for sewage pipe line trenches etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, complete all as specified and directed.

M&L for RCC 1:1½:3, A1 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:1½:3, A1 (using 20 mm graded stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical surfaces complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc.

M&L for brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks for walls, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for rendering 10+5 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed.

M&L preparing new surface of walls and applying two coats of cement based paint , complete all as specified and directed complete all as specified and directed.

M&L for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Description all as item No- 15 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc.

M&L Hardcore of gauge of broken stone or boulders n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC type B0 1:2:4 (using 12.5mm graded aggregate) as in leveling coarse flooring laid over and incl 75mm thick PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) sub base, to make the surface level complete all as specified and directed .

M&L for non skid coloured joint free designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick rendering /backing coat in CM 1:4, complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or paving, finishing cement concrerte surface even and smooth without using extra cement, making joints complete all as specified and directed by Engr-in-Charge.

M&L two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm in width and girth complete all as specified and directed by Engr-in-Charge.

S&F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete all as specified and directed

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & ottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F 100 mm long butt hinges medium weight cold rolled mild steel and fixed with screws or weld to steel frame complete all as specified and directed.

S&F 150 mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed

S&F aluminium anodised handles 150 mm long cast type , complete all as specified and directed .

S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floor , all as specified and as directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floor , all as specified and as directed

S&F 110mm PVC (SWR) bends any redius with solvent cement joints, complete all as specified and directed

S&F 75mm PVC (SWR) bends any redius with solvent cement joints, complete all as specified and directed

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided complete all as specified and directed

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided , complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete all as specified and directed

S&F towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).complete all as specified and directed

S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white including 15mm dia PVC connection 600mm, taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, 32 mm CP waste coupling, union, & waste pipe 900mm, complete all as specified and directed.

S & F 15 mm Pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed .

S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete connections complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete connections complete all as specified and directed.

S&F 25 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete connections complete all as specified and directed.

Anodised aluminium window and ventilator shutters with frame, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap eading, screws etc. complete all as specified

S & F GI steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle exc 0.5 Sqm in each pan complete all as specified and directed.

S&F mild steel roof trusses (framed) purline,beam, HF, as in joist, channel, angle or tee sections fixed independently without connecting plates confirming to Fe 410-W (Gde E-250) quality 'A' etc complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with , complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparing new plastered surfaces on walls & other surface and applying three coats of white wash, complete all as specified and directed.

S& F vitreous china urinal, half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern, flush pipe) including brass waste coupling complete all as specified and as directed

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including 32mm bore PVC flush pipe and brackets complete fixed in wall and floor to trap of EWC as required and complete all as specified and directed.

S & F brass chromium plated angle cock with wall flange 15 mm dia screwed for iron pipe or brass ferrule , complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc with necessary materials for fittings & making good to floor, complete all as specified and directed.

S&F MS Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etcconforming to Fe 290 Gde 165 complete all as specified and directed.

Construction of septic tank for 05 users: including excavation in any type of soil, foundation PCC 1:2:4, brick work in CM 1:4 RCC M-25 design mix slab, including RCC precast manhole cover having 6mm thick steel strip embedded all around with angle iron frame, vent shaft and sludge chambers etc including disposal of surplus soil, complete all as shown on drawing and all specified. Drg No: CESZ/TD-01/2015 & CESZ/TD-1079/2011

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including Non metallic rigid PVC Conduit not less than 20 mm dia / casing and caping as per ground requirement with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switches, fan regulators etc for one light/fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including PVC Casing & Caping (double interlock type) of as required width (not less than 20 mm in width) ISI marked medium duty, white colour with all accessories of same grade, fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC Box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

S & F Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

S&F Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

S&F Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

S & F MCB DB SPN 4 way, 230 Volt with 200 A rated bus bar, double door type modular type complete all as specified and as directed.

S & F MCB SPN 32/40 Amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

Supply and fix energy efficient surface Mounted LED Luminire 18/20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr, complete all as specified and as directed.

Material & labour for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.3 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia medium grade protection pipe and salt etc and connected to earthing test point incl necessary earth work, testing complete all as specified and directed.

Supply and laying 1100 volt grade XLPE insulated heavy duty cable, 16 sqmm 2 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches complete all as specified and directed.

Supply and Fixing exhaust fan of size 300 mm sweep assembling at site including electric connection from ceiling rose to connector with fliexible cord twin core twisted copper of size 23/0.0076 and testing including taking down existing one complete all as specified and directed. Make:- Havells/Bajaj/crompton/Usha.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 25 mm bore incl cutting and connecting up with existing line by using socets bend etc for iron pipe and fixed complete all as specified and as directed.

S & F LED street light luminaires 45 Watt complete comprising of epoxy powder coated housing, enclosed with glass cover in front having 4500 lumen output , protection IP-66, incl GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.20 Metre long bent to shape as per specified with necessary MS clamps, complete all as specified and as directed. (Make Bajaj/Philips/CG)

S & F Lamp holder, PVC/Polycarbonate type with back plate incl LED lamp 1 x 10 watts suitable for B22 pin type batten/pandent holder complete all as directed.

SOFI CONSTRUCTIONS (BID ID -3069603)