SPL REPAIR FOR DEVLOPMENT OF BOREWELLS AND ALLIED WORKS OF WATER SUPPLY INSTALLATION AT VARANASI CANTT UNDER GE (EAST) ALLAHABAD.

Amount

Supply & Fixing in repair including testing commission of non clog horizontal / vertical submersible pump set with chrome steel Impeller and cutter non-clog to pass 40 mm size particles including supply, Installation with guide rail and lifting chain, earthing, testing complete of 20 HP having average flow rate @ 1500 Lit per min of Make - KSB / Kirloskar / Calama

Supply & Fixing in repair of Chlorine test kit with coloured sample complete with all testing fitments and OT solution in Rexene finished box as per sample or required at site complete.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Supply & Fixing in repair of submersible copper conductor cable of size 16 Sqmm 3 core complete as specified & directed.

Material & Labour for laying jointing commissionning & testing of 150 mm bore Ductile Iron water mains with flanged ends centrifugally cast Class K-9 having wall thickness 6 mm conforming to IS in any length jointing with rubber / fibre joints as in trenches complete as specified & directed. Note : Joints shall be measured & paid seperately

Material & Labour in repair Cast Iron fittings bends (any type, radius and angle) tapers any type (straight, bends, increasing or decreasing or double socket etc), Tee pieces, single branch, Y junction, double branch cross (all sockets or socket and spigot) collars, caps and plugs upto 1500mm bore pipe complete as specified & directed.

Material & Labour for development of borewell by flushing and cleaning of bore well with low pressure air compressor to remove raw water, sand, silt, dust or wastes and decayed particles to Improve the yield of the bore well having compressor pressure 200 PSI to 400 PSI for continuous duration of 10 to 12 hours (contractor quoted rate is included to all T&P required for development of bore like compressor with necessary deisel for operation of compressor no extra shall be consider) complete as required & directed to entire satisfaction of Engineer-in-charge.

Material & Labour for replacement of ERW steel pipe including specials having 100 mm bore with wall thickness 4.8 mm as per IS : 3589 (1981) complete as directed by Engineer-incharge.

Material & Labour for replacement of ERW steel pipe including specials having 150 mm bore with wall thickness 5.4 mm as per IS : 3589 (1981) complete as directed by Engineer-incharge.

Supply & loose filling in bore well the siliceous free from foreign material cleaned washed and dis-infected pea size gravels of 10-12 mm rounded conforming to IS : 4097-1988 complete all as specified & directed by Engineer-in-Charge.

Material & Labour for cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in surrounding of bore well to prevent the surface water contamination of bore well or for protection of ground water not go in well, coping chamfered edges or similar works including necessary form work if required complete as specified & directed.

Supply & Fixing in repair submersible motor fully auto star delta startor suitable for 40 HP motor with MUG-50 contactor, MF relay 40-60 Amp, electronic timer switch and phase preventor, start stop push button, three digital ammeter & digital voltmeter fixed with sheet metal enclosure complete as specified & directed.

Supply & Fixing in replacement 150 mm bore cast iron reflux valve with by-pass arrangement with both end flanged including joints with jointing material labour for making joints with rubber or fibre joints including bolts, nuts fixed in repair including taking out old damaged unserviceable valve & removing from site complete as specified & directed.

Supply & Fixing in repair 100 mm bore cast iron sluice valve of pressure rating PN 1.6 conforming to IS : 14846 with stainless steel rod / spindle and check nut, both ends flanged and drilled ends suitable for rubber gasket joints complete all as specified & directed. Make : Kirloskar / Leader / Kejriwal or BIR

Supply & Fixing in repair 150 mm bore cast iron sluice valve of pressure rating PN 1.6 conforming to IS : 14846 with stainless steel rod / spindle and check nut, both ends flanged and drilled ends suitable for rubber gasket joints complete all as specified & directed. Make : Kirloskar / Leader / Kejriwal or BIR

Material & Labour in repair for 20 mm bore galvanised steel water tubing "medium grade" for water supply pipes & connection with all necessary fittings such as sockets, elbow, unions, Tee & short length and laid in trenches or in floors complete as specified & directed.

Material & Labour in repair for 25 mm bore galvanised steel water tubing "medium grade" for water supply pipes & connection with all necessary fittings such as sockets, elbow, unions, Tee & short length and laid in trenches or in floors complete as specified & directed.

Material & Labour in repair for 50 mm bore galvanised steel water tubing "medium grade" for water supply pipes & connection with all necessary fittings such as sockets, elbow, unions, Tee & short length and laid in trenches or in floors complete as specified & directed.

Supply & Fixing in repair 20mm bore gun metal gate / globe valve with iron wheel head, screwed both ends for pipe and fixed complete as specified & directed.

Supply & Fixing in repair 25mm bore gun metal gate / globe valve with iron wheel head, screwed both ends for pipe and fixed complete as specified & directed.

Supply & Fixing in repair 50mm bore gun metal gate / globe valve with iron wheel head, screwed both ends for pipe and fixed complete as specified & directed.

Supply & fixing, testing, commissioning of LT feeder pillar panel board outdoor type of size 1000 mm x 1000 mm x 150 mm depth, powder coated paint, dust & vermin proof, factory fabricated with 3 mm thick CRCA sheet with front openable double door type and locking arrangement, mounted on and including suitable size angle iron stand made out of 65 x 65 x 6 mm angle iron painted with two coat of synthetic enamel bitumenous paint over a coat of red oxide primer embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete with minimum ground clearance of 450 mm suitable for comprsing of the following accesseries:- Note : All connection from bus bar will be copper Insulated strip of suitable size lugs & Insulated support. Make : ITE Gurgaon, Asian, Pride, Universal, Shalabh Make of MCCB : L&T/ Schneider / ABB / Legrand

Material & Labour for run lead joints including material required suitable for 80 mm bore cast iron pipes & fittings in old pipes of any locations including taking out old joint at places wher leakage is observed, burning out of old lead cleaned the joints and making new joints and including necessary earth work including excavation & returning filling complete as specified & directed by Engineer-in-charge.

Material & Labour for run lead joints including material required suitable for 100 mm bore cast iron pipes & fittings in old pipes of any locations including taking out old joint at places wher leakage is observed, burning out of old lead cleaned the joints and making new joints and including necessary earth work including excavation & returning filling complete as specified & directed by Engineer-in-charge.

Material & Labour for run lead joints including material required suitable for 150 mm bore cast iron pipes & fittings in old pipes of any locations including taking out old joint at places wher leakage is observed, burning out of old lead cleaned the joints and making new joints and including necessary earth work including excavation & returning filling complete as specified & directed by Engineer-in-charge.

Material & Labour in repair of Lead Acid Battery having 12 Volt 100 AH with brass terminal and battery lead with copper wire of length complete as specified & directed by the Engineer-in-Charge.

M/s Deeksha construction